SikaTop 10 is a primer based on synthetic resin on styrene acrylic copolymers, with mineral fillers. Part of the Sika EmotionFloor range for cementitiuous substrates and tiles. Particularly for use as primer for SikaDecor 803 Nature, on mineral substrates, cementitious coatings and old ceramic tiles, not suitable for horizontal surfaces. Easy and ready to use.
SikaTop 10 is a primer based on synthetic resin on styrene acrylic copolymers, with mineral fillers. Part of the Sika EmotionFloor range for cementitiuous substrates and tiles.
- Particularly for use as primer for SikaDecor 803 Nature
- On mineral substrates, cementitious coatings and old ceramic tiles
- Not suitable for horizontal surfaces
Features & Benefits
- Excellent adhesion on porous and vitreous substrates
- Prevents loss of water into the substrate
- Increases durability
- Resistant to alkaline pH
- Ready to use
- Easy to use
- For substrates with higher moisture content
For more details please download the product data sheet from the 'DATASHEETS' tab above.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Be the first to ask a question about this product!
Thermilate PRO Stabilising Primer is a water-based primer specially formulated to seal unstable areas which remain powdery and chalky after the surface has been thoroughly prepared for painting with Thermilate PRO Insulating S-Flex Coating or Thermilate PRO Insulating T-Flex Coating.
Paint For Pros MagnetPlaster, a dark grey ready-mixed premium plaster for turning interior surfaces magnetic. Can be overcoated with conventional paints, or use blackboard or whiteboard paint for a writeable, magnetic surface. Easy to apply - can be fully loaded with magnets after 24 hours Creates a noticeboard or storage area for offices,...
Eagle Quick-Drying Bitumen Primer provides a key on substrates for all bituminous roof paints and surface coatings, applying by brush or sprayer, and requires no thinning. Use on substrates and surfaces that include: Concrete roofs and floors, cementicious screeds and renders Bitumen felt, asphalt and mastic Weathered corrugated iron and...
Coo-Var Acrylic Primer Sealer Undercoat is a water-based, low odour primer ideal for plaster preparation or any wood surface which requires priming inside or out. ADVANTAGES Fast drying Exterior/Interior use Matt finish Four tin sizes Apply with roller, brush or spray
Sikagard 552 W Aquaprimer is one component water dispersed adhesion promoting primer for water dispersed polymer paint coatings. Sikagard 552 W Aquaprimer is part of a system that complies with the requirements of EN 1504-2 as protective coating. Priming coat for concrete and dense mineral substrates like fibre cement, aerated concrete, gypsum and...
Sikagard 551 S Elastic Primer is apPrimer for very dense or porous concrete surfaces or difficult application conditions. Sikagard 551S Elastic Primer is a one component solvented primer for Sikagard 550 W Elastic, Sikagard 545 W Elastofill and Sikagard 675 W ElastoColor.
This low odour, high opacity white primer/sealer is suitable for most surfaces including tiles, wood, metal (including galvanised), plaster, existing paint, masonry and most plasics (test a small area first).
Rust-Oleum Mathys Pegalink Universal Adhesion Primer is a water based primer for indoor and outdoor use. Adheres to many surfaces: wood, gypsum, cement, bricks and especially on smooth and difficult to adhere to surfaces like: galvanised steel, copper, zinc, polycarbonate, hard PVC, Pegagraff Hydro, etc.
Coo-Var High Performance 2 pack Primer Sealer is an extra heavy duty coating ideal as a barrier or sealer coat if compatibility is a problem when coating an existing paint.
Rust-Oleum 3333 Super Adhesion Primer provides excellent adhesion on non-porous, dense mineral substrates like: Tiles or power floated concrete Non-ferrous metals like stainless steel, aluminium or new hot-dip galvanized steel Thermosetting plastics like fibreglass-reinforced polyester or epoxy Perfect chemical bond without blasting or...
Zinsser Bulls Eye 1-2-3 is a water-based all surface, all purpose primer, sealer & stainkiller. Like Bulls Eye 1-2-3 Plus, it offers fast drying times; dries in 30 minutes, recoatable in 1 hour, and can be used internally or externally, Zinsser Bulls Eye 1-2-3 is particularly effective as an adhesion promoting primer for hard-to-stick...