Mathys Plastopan Super N is a solvent-based synthetic filler for smoothing out uneven areas on indoor and outdoor woodwork that have to be recoated with oil based or synthetic based paints. Quick hardening Excellent filling Contains no water soluble substances Absorbs very little of the applied paint.
Mathys Fixonal is a fixating, clear varnish to strengthen all porous or chalking substrates prior to painting. Reinforces the adhesion of the new coat on the old paint and also makes it more flexible.
- Fixing and reinforcing
- Alkali resistant
- Quick drying
Mathys Fixonal is a fixating clear varnish based on acrylic polymers to strengthen all porous or chalking substrates. Mathys Fixonal reinforces the adhesion of the new coat on the old paint and also makes it more flexible.
Features & Benefits
- Fixing and reinforcing
- Alkali resistant
- Quick drying
- Density: 0,81 - 0,83
- Gloss level at 60º: > 90%
- Solids content in volume: 15 %
- Solids Content in weight: 19 %
Drying Times At 20°C/RH 50%
- Touch dry: ± 45 minutes
- Dry to handle: ± 1 hour
- Dry to recoat: ± 2 - 4 hours
- Fully cured: ± 1 day
± 10 - 15 m²/l, according to the porosity of the substrate.
Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application.
The surfaces to be treated must be dry, clean and adhering. Chalking substrates must be rubbed down with a hard brush and dusted off. Rub down glossy coats. Degrease if necessary. After drying, apply the topcoat as quickly as possible.
Directions For Use
To ensure homogeneity, coating materials should be thoroughly stirred prior to use.
Work in a dry and well-ventilated area. > 5°C, < 80% R.H
- Brush: By preference, do not dilute
- Roller: By preference, do not dilute
- Airless Spray: Not recommended
- Air-Atomised Spray: Not recommended
Fixonal does not improve the adhesion of old paint coats on the substrate.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- Brush, Roller
- Dry to Handle (at 20°C)
- ± 1 hour
- Dry to Recoat (at 20°C)
- ± 2 - 4 hours
- Fully Cured (at 20°C)
- ± 1 day
- 10m² per litre
- Min. Application Temperature
- 0,81 - 0,83
- Solids by Volume
- 15 %
- 700 g/l max
- Shelf Life (from date of manufacture)
- 5 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C
- Touch Dry
- ± 45 minutes
- Recommended Dry Film Thickness
- 15 µm
- Recommended Wet Film Thickness
- 100 µm
- UN Number
- Not regulated
Be the first to ask a question about this product!
Blackfriar Acrylic Primer Undercoat is an all-in-one, quick drying primer and undercoat for use on a wide range of substrates including wood, masonry, dry plaster and cement. Provides excellent opacity and adhesion. Product Features Quick drying. Interior and exterior use. All-in-one primer and undercoat. Excellent opacity. Excellent...
Paint For Pros Quartz White Primer, a ready-to-use primer to improve adhesion of plaster, specifically MagnetPlaster. Easy to apply One layer provides sufficient strength Contains little to no solvent Meets health and safety requirements for indoor use Tack-free after an hour Ready to plaster over after 12 hours
Mathys Pegaprim Exterior is an acrylic primer for exterior applications which can be applied to most mineral substrates that neutralises differences in the absorption characteristics of the substrate. Reinforces the substrate and reduces absorption Neutralises differences in absorption characteristics Prevents differences in the...
Blackfriar High Performance Undercoat is a high build undercoat with good obliterating properties. Suitable for use as an 'intermediate coat' between primer and finishing coats on most common substrates. Ideal for wood, plaster and metal. A slightly structured coating with good leveling and covering properties. Product Details Excellent...
Coo-Var Acrylic Primer Sealer Undercoat is a water-based, low odour primer ideal for plaster preparation or any wood surface which requires priming inside or out. Fast drying and easily applied. Product Features Fast drying Exterior/Interior use Matt finish Three tin sizes Apply with roller, brush or spray
Mathys Pegafix is a colourless impregnating primer for porous, mineral substrates such as concrete, breeze block, bricks, etc. before painting them with waterborne paints. High fixing capacity Superior penetration characteristics Water based
Sikagard 177 is a two-part epoxy, solvent free, laminating resin that is high viscosity epoxy resin for priming concrete substrates and cement based mortars on vertical surfaces and ceilings. Features and Benefits High viscosity Good sag resistance Good wetting properties for glass fabric matt High chemical resistance, also to hydrogen...
Coo-Var Stain Lock is a sprayable, water based coating designed to block out difficult stains and odours. It is a multi-surface primer / sealer. It is water based and sprayable, making it suitable for domestic use. Product Features Gives excellent coverage to a multitude of stains Helps to prevent bleeding through the finishing coat. A...
SikaTop 10 is a primer based on synthetic resin on styrene acrylic copolymers, with mineral fillers. Part of the Sika EmotionFloor range for cementitiuous substrates and tiles. Particularly for use as primer for SikaDecor 803 Nature, on mineral substrates, cementitious coatings and old ceramic tiles, not suitable for horizontal surfaces....
Mathys Mur-Filler is an elastic joint filler that contains quartz for the preparation of active and non-active cracks, can be used interior and exterior. Elastic High filling power Not sandable (contains quartz)
HMG Uniblok Sealer is a 1K air drying sealer / isolator for sealing synthetic enamels against attack when overcoating with stronger solvent systems such as cellulose, 2K finishes etc. Outstanding sealing properties. Suitable for a wide variety of automotive, industrial & decorative applications. Click to jump down to Technical Data...
Coo-Var High Performance Primer is a water based two pack epoxy primer to assist adhesion on difficult surfaces. Coo-Var High Performance Primer should be diluted with 10% water for application. To assist the adhesion of PROFLOOR floor paint or other Coo-Var products to difficult floors, tiles, etc or where mechanical abrasion is not practical...
Sikagard 551 S Elastic Primer is a primer for very dense or porous concrete surfaces or difficult application conditions. It is a one component solvented primer for Sikagard 550 W Elastic, Sikagard 545 W Elastofill and Sikagard 675 W ElastoColor. Features and Benefits: Deep penetration Water vapour permeable Surface strengthening
Coo-Var Tile and Melamine Primer is an ideal primer for tile and melamine surfaces prior to painting. Product features Ideal for use in kitchens and bathrooms. Tiled surfaces. Most paints will adhere to this coating, water or oil based. Apply with brush or roller.
Paint For Pros MagnetPlaster, a dark grey ready-mixed premium plaster for turning interior surfaces magnetic. Can be overcoated with conventional paints, or use blackboard or whiteboard paint for a writeable, magnetic surface. Easy to apply - can be fully loaded with magnets after 24 hours Creates a noticeboard or storage area for offices,...