Magpaint Europe Quartz White Primer
Paint For Pros Quartz White Primer, a ready-to-use primer to improve adhesion of plaster, specifically MagnetPlaster.
- Easy to apply
- One layer provides sufficient strength
- Contains little to no solvent
- Meets health and safety requirements for indoor use
- Tack-free after an hour
- Ready to plaster over after 12 hours
Paint For Pros Quartz White Primer is
One layer of Quartz White Primer is sufficient to strengthen the surface and improve the adhesion of MagnetPlaster, easily applying due to the slightly rough structure.
Based on an acrylate resin with pigments, quartz particles and additives, Quartz White Primer contains little to no solvent and meets health and safety requirements for indoor use.
Apply Quartz White Primer with a block brush or coat roller.
The substrate must be clean, dry, grease-free and load-bearing. Remove all loose parts and make the surface dust-free, remove wallpaper completely. Fill holes and cracks with a filler.
- Do not process at temperatures below +5°C and/or
a relativehumidity of less than 80%.
- Stir well before use.
Approx. 8-10 m² /L for one layer. Depending on many factors such as porosity and roughness of the substrate and material loss during application.
- After about 1 hour, the Quartz White Primer is tack-free.
- After about 12 hours, the Quartz White Primer is ready for use, and MagnetPlaster can be applied.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Be the first to ask a question about this product!