Blackfriar Concentrated Fungicidal Wash

BF566

Blackfriar Concentrated Fungicidal Wash when diluted, produces a solution for killing moulds, algae and other organic growths. Effectively sterilises surfaces prior to decoration.

Product Features

  • Kills organic growth on most surfaces.
  • Minimises risk of re-infestation.
  • Excellent coverage.
  • Interior and exterior use.
  • Professional Use Only
Size
£8.48
VAT excluded

£10.18 Tax incl.
Quantity

Description

Blackfriar Concentrated Fungicidal Wash when diluted, produces a solution for killing moulds, algae and other organic growths. Effectively sterilises surfaces prior to decoration. Surface biocide for professional use against fungal and algal growths on hard surfaces. For use only as a surface biocide.

Preparation

Remove dirt or grease deposits and any flaking or loosely attached surface coatings. Scrape off mosses, lichens, mould or algae growths or use a stiff brush. The remaining spores will then be killed by washing down with one or two applications of Fungicidal Wash.

STATUTORY CONDITIONS RELATING TO USE. WATER BASED CONCENTRATE. FOR USE BY PROFESSIONAL OPERATORS. Read all precautions before use. HSE No. 9355.

Users must comply in full with all their legal responsibilities under The Control of Pesticides Regulations 1986 (as amended), including complying with all Conditions of Approval.

Application

Surface biocide for professional use against fungal and algal growths on hard surfaces. The contents of this 240ml container should be diluted with clean water to make 5 litres of a 0.6% benzalkonium chloride solution. Apply to all infected surfaces and adjacent areas. Allow 24 hours for the treatment to be fully effective. Two applications are recommended for heavily infected surfaces.

Coverage

Apply 1 litre of diluted product per 6-8 square metres by brush or spray. Very absorbent surfaces may require more. Apply diluted product as necessary by cloth.

Clean Up

Clean equipment with plenty of water after use.

Safety

ACTIVE INGREDIENT: BENZALKONIUM CHLORIDE 13% W/W (130 G/L) CONTAINS: Quarternary ammonium compounds, benzylcoco alkyldimethyl, chlorides. Causes burns. Very toxic to aquatic organisms. The COSHH (Control of Substances Hazardous to Health) Regulations 2002 (as amended) apply to the use of this product at work.

Avoid excessive contamination of coveralls. DO NOT CONTAMINATE FOODSTUFFS, EATING UTENSILS OR FOOD CONTACT SURFACES.

This material and its container must be disposed of in a safe way. Wear suitable protective clothing, gloves and eye/face protection when diluting. Avoid contact with skin. When using do not eat or drink. Avoid contact with eyes. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Do not empty into drains. Do not contaminate ground, waterbodies or watercourses with chemicals or used container. KEEP AWAY FROM TREATED SURFACES UNTIL DRY.

In case of insufficient ventilation wear suitable respiratory equipment. Guidance on suitable respiratory protective equipment and eye protection is provided in HSE Booklet HS(G)53: “The Selection, Use and Maintenance of Respiratory Protective Equipment - A Practical Guide”.

Do not breathe gas/fumes/vapour/spray (appropriate wording to be specified by the manufacturer). WASH HANDS AND EXPOSED SKIN before meals and after use. Keep out of the reach of children. KEEP IN A SAFE PLACE. In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible).

Product Features

  • Kills organic growth on most surfaces.
  • Minimises risk of re-infestation.
  • Excellent coverage.
  • Interior and exterior use.

Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Product Details
BF566

Data sheet

Manufacturer
Blackfriar Professional
Parts
One
Base Type
Water Based
Interior/Exterior Use
Both
Application
Brush
Coverage
6-8m² per litre
Recommended Thinner/Cleaner
Water
Touch Dry
24 Hours
UN Number
UN1760
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send
16 other products in the same category:

Mathys Plastopan Latex

Mathys Plastopan Latex is a water based, extra white, flexible putty filler for equalising inside walls before applying a latex coating. Easy to apply, easy to sand and can be used on alkaline substrates. Easy to apply Easy to sand Can be applied on alkaline substrates

Price £16.93
In stock

Sika Primer 215

Sika Primer 215 is a low viscosity primer that should be used to prime various plastics, timber and other porous materials prior to bonding with Sikaflex products. Because plastics vary so much in their chemical composition, preliminary trials are necessary. It is manufactured in accordance with ISO 9001 / 14001 quality assurance system and...

Price £37.38
In stock

Blackfriar Problem Solving Primer

Blackfriar Problem Solving Primer is formulated to cover a whole range of surfaces and surface problems. It contains cationic technology that neutralises stains such as wood tannins, soot residue, nicotine, water and adhesive residues, concealing them permanently. Specifically formulated to provide good adhesion to a wide range of substrates,...

Price £22.22
In stock

Mathys Pegafix

Mathys Pegafix is a colourless impregnating primer for porous, mineral substrates such as concrete, breeze block, bricks, etc. before painting them with waterborne paints. High fixing capacity Superior penetration characteristics Water based

Price £26.09
In stock

Mathys Porisol

Mathys Porisol is a clear pore-filler and sealer that can be applied undiluted on very porous substrates (cardboard, paper, light kinds of woods), and diluted on substrates with different absorption capacity (plaster, wood-fibre boards, etc.) before application of water based paints. Fixing Isolating Nearly odorless Can be recoated with...

Price £11.29
In stock

Mathys Pegaflex

Mathys Pegaflex is an acrylic levelling filler for indoor and outdoor use on vertical and overhead surfaces requiring small/fine repairs.  High flexibility and elasticity Excellent adhesion on all sound substrates and paints Perfect alkali resistant Not affected by ageing thus keeping its original flexibility Sufficiently hard, but can...

Price £7.24
In stock

Blackfriar Anti-Mould Solution

Blackfriar Anti-Mould Solution kills mould and inhibits regrowth. Use it inside and out to eliminate unsightly mould prior to decorating on many surfaces including tiles, plaster, wallpaper, paving slabs and slate. Product Details Powerful mould killing solution. Use on tiles, plaster, wallpaper, paving slabs, marble and more. Odourless....

Price £19.99
In stock

HMG Uniblok Sealer

HMG Uniblok Sealer is a 1K air drying sealer / isolator for sealing synthetic enamels against attack when overcoating with stronger solvent systems such as cellulose, 2K finishes etc. Outstanding sealing properties. Suitable for a wide variety of automotive, industrial & decorative applications. Click to jump down to Technical Data...

Price £28.69
In stock

Zinsser Peel Stop

Zinsser Peel Stop Primer is a clear coating to help prevent peeling, flaking, cracking, dusting or chalking. Internal/external use Glues down edges of old coatings Recoatable in 2 hours Seals and bridges cracking and crazing Binds chalky surfaces Flexible/Breathable Easy to use Easy to clean

Price £8.35
In stock

SikaTop 10

SikaTop 10 is a primer based on synthetic resin on styrene acrylic copolymers, with mineral fillers. Part of the Sika EmotionFloor range for cementitiuous substrates and tiles. Particularly for use as primer for SikaDecor 803 Nature, on mineral substrates, cementitious coatings and old ceramic tiles, not suitable for horizontal surfaces....

Price £31.71
In stock

Eagle Quick Drying Bitumen Primer

Eagle Quick-Drying Bitumen Primer provides a key on substrates for all bituminous roof paints and surface coatings, applying by brush or sprayer, and requires no thinning. Use on substrates and surfaces that include: Fast-drying - 3-4 hours Ready for use 6 -10m² per litre coverage Suitable for use with all bituminous surface coatings...

Price £18.25
In stock

Sikagard 177

Sikagard 177 is a two-part epoxy, solvent free, laminating resin that is high viscosity epoxy resin for priming concrete substrates and cement based mortars on vertical surfaces and ceilings. Features and Benefits  High viscosity Good sag resistance Good wetting properties for glass fabric matt High chemical resistance, also to hydrogen...

Price £255.84
In stock

Mathys Pegaprim Exterior

Mathys Pegaprim Exterior is an acrylic primer for exterior applications which can be applied to most mineral substrates that neutralises differences in the absorption characteristics of the substrate. Reinforces the substrate and reduces absorption Neutralises differences in absorption characteristics Prevents differences in the...

Price £36.36
In stock

Coo-Var Two Pack High Performance Primer

Coo-Var High Performance Primer is a water based two pack epoxy primer to assist adhesion on difficult surfaces. Coo-Var High Performance Primer should be diluted with 10% water for application. To assist the adhesion of PROFLOOR floor paint or other Coo-Var products to difficult floors, tiles, etc or where mechanical abrasion is not practical...

Price £77.99
In stock

407 Multi Surface Primer

This low odour, high opacity white primer/sealer is suitable for most surfaces including tiles, wood, metal (including galvanised), plaster, existing paint, masonry and most plasics (test a small area first).

Price £23.39
In stock

Blackfriar Stabilising Solution

Blackfriar Stabilising Solution binds and seals powdery and porous surfaces prior to decoration. Provides a firm foundation on unstable surfaces such as old lime wash and distemper. Product Features Binds and seals powdery surfaces. Ideal for old limewash and distemper. Water-based. Interior and exterior use

Price £17.23
In stock