Sikalastic 810 is a two part, polyurethane adhesion promoting bonding bridge for overlapping or overcoating of Sikalastic waterproofing membranes when exceeding the maximum waiting time.
Coo-Var Acrylic Primer Sealer Undercoat
Coo-Var Acrylic Primer Sealer Undercoat is a water-based, low odour primer ideal for plaster preparation or any wood surface which requires priming inside or out.
- Fast drying
- Exterior/Interior use
- Matt finish
- Four tin sizes
- Apply with roller, brush or spray
Coo-Var Acrylic Primer Sealer Undercoat is a water based and low odour primer is ideal for plaster preparation or any wood surface which requires priming inside or outside.
- Domestic renovation
- Garden furniture
Recommended Dried Film Thickness Per Coat: 35-40 microns
Recommended Wet Film Thickness Per Coat: 75 microns
Do not use in cold, damp temperatures under 7°C.
Can be applied by roller, brush, or spray.
Estimated coverage: 13m2/litre.
Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Be the first to ask a question about this product!
A reinforcement fleece for the first coat of Murfill Waterproofing Coating on structural surfaces where required. When fleece is introduced it offers maximum durability, flexibility and strength to the system.
Rust-Oleum 3333 Super Adhesion Primer provides excellent adhesion on non-porous, dense mineral substrates like: Tiles or power floated concrete Non-ferrous metals like stainless steel, aluminium or new hot-dip galvanized steel Thermosetting plastics like fibreglass-reinforced polyester or epoxy Perfect chemical bond without blasting or...
Sikagard 552 W Aquaprimer is one component water dispersed adhesion promoting primer for water dispersed polymer paint coatings. Sikagard 552 W Aquaprimer is part of a system that complies with the requirements of EN 1504-2 as protective coating. Priming coat for concrete and dense mineral substrates like fibre cement, aerated concrete, gypsum and...
Thermilate PRO Stabilising Primer is a water-based primer specially formulated to seal unstable areas which remain powdery and chalky after the surface has been thoroughly prepared for painting with Thermilate PRO Insulating S-Flex Coating or Thermilate PRO Insulating T-Flex Coating.
Paint For Pros MagnetPlaster, a dark grey ready-mixed premium plaster for turning interior surfaces magnetic. Can be overcoated with conventional paints, or use blackboard or whiteboard paint for a writeable, magnetic surface. Easy to apply - can be fully loaded with magnets after 24 hours Creates a noticeboard or storage area for offices,...
SikaTop 10 is a primer based on synthetic resin on styrene acrylic copolymers, with mineral fillers. Part of the Sika EmotionFloor range for cementitiuous substrates and tiles. Particularly for use as primer for SikaDecor 803 Nature, on mineral substrates, cementitious coatings and old ceramic tiles, not suitable for horizontal surfaces. Easy and ready to...
Eagle Quick-Drying Bitumen Primer provides a key on substrates for all bituminous roof paints and surface coatings, applying by brush or sprayer, and requires no thinning. Use on substrates and surfaces that include: Fast-drying - 3-4 hours Ready for use 6 -10m² per litre coverage Suitable for use with all bituminous surface coatings...
Sikagard 177 is a two-part epoxy, solvent free, laminating resin that is high viscosity epoxy resin for priming concrete substrates and cement based mortars on vertical surfaces and ceilings.
This low odour, high opacity white primer/sealer is suitable for most surfaces including tiles, wood, metal (including galvanised), plaster, existing paint, masonry and most plasics (test a small area first).
Rust-Oleum Mathys Primer 44 HS has a large fixation capacity for stabilising loose particles and improving the adherence of subsequent topcoats. ADVANTAGES Unsaponifiable Good UV resistance Excellent fixation on roofs Very flexible Chlorinated rubber technology, solvent-based Quickly water-resistant (1 hour after application at 20...