Remmers iQ-Therm 30 / 50 / 80
Remmers iQ-Therm 30 / 50 / 80 is a capillary-active, rigid PUR foam panels for the construction of highly thermal insulating, diffusion-open, interior insulation with capillary transport of moisture. iQ-Therm combines capillarity, thermal insulation and regulation of humidity in one system.
- Mould control and prevention in existing buildings
- Implementation of the hygienic minimum heat insulation level in existing buildings
- Improving the room climate by increasing the wall surface temperature
Remmers iQ-Therm 30 / 50 / 80 is a capillary-active, rigid PUR foam panels for the construction of highly thermal insulating, diffusion-open, interior insulation with capillary transport of moisture.
Remmers iQ-Therm combines capillarity, thermal insulation and regulation of humidity in one system. To realise these multifunctional requirements, holes are made in regular intervals perpendicular to the surface in highly thermal insulating, polyurethane foam panels. These holes are filled at the factory with a special, highly capillary-active, mineral material. The panels are attached to the surface of the interior wall with iQFix and finished with a layer of render, iQ-Top. With a thickness of 1.0 cm iQ-Top represents the sorption layer.
Remmers iQ-Therm 30, 50 or 80 are made of highly thermal insulating, rigid PUR foam panels that have holes filled with a mineral, capillary conductive filling. The rigid foam panels are used exclusively in a system. The iQTherm system is building material class B1 flammable according to DIN 4102-1.
Please note: Before using, the panels must be stored for 48 hours in the room to be insulated at a temperature above 5°C. Observe the Technical Data Sheets for the components in the system.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- Interior / Exterior Use
- Pack Size
- 1200mm x 600mm x 30mm (Pack Of 14), 1200mm x 600mm x 50mm (Pack Of 8), 1200mm x 600mm x 80mm (Pack Of 5)
Be the first to ask a question about this product!