Kolorbond uPVC Painting Kits

KolorbondKit

All of the products and application tools required to ensure a high quality finish on uPVC windows, doors and fascias. It is also suitable for use on composite doors. Kolorbond uPVC Painting Kits are designed around Kolorbond Aquatek paint.

Technispray Kolorbond Aquatek is a water-based, low-odour, quick-drying exterior and interior coating for PVCu (uPVC), available in 2400+ colours from British Standard, NCS and RAL with an attractive smooth, satin finish. Can also be colour matched to nearly any colour, contact us for details.

**Available for delivery - see Delivery Options below**

Product customisation

Don't forget to save your customization to be able to add to cart
  • 250 char. max
    Your customization:
Colour Group
Size
Finish
£63.00
£75.60 Incl. VAT
Quantity
Please choose your colour

100% secure payments
Description

Kolorbond uPVC Painting Kits are designed around Kolorbond Aquatek paint and contain all of the products and application tools required to ensure a high quality smooth, satin finish on uPVC windows, doors and fascias. It is also suitable for use on composite doors.

Available in 4 pack sizes to suit the size of your project, please see `Paint Kit Contents`.

Technispray Kolorbond Aquatek is a water-based exterior and interior coating based on proven exterior durable polyurethane/acrylic resins, this single pack (mono-component) finish for PVCu (uPVC), is available in 2400+ colours from NCS, British Standard and RAL, and gives an attractive smooth, satin finish.

When correctly applied to PVCu window frames, doors, conservatories and fascias Kolorbond Aquatek is guaranteed* to adhere to the plastic. Aquatek has a 10 year adhesion guarantee and 5 year colour fastness guarantee - Performance and guarantees are not valid without the use of the relevant cleaning products (included in each pack)

Ideally formulated to be brush applied, especially applicable for site application on refurbishment projects, domestic & commercial applications.

Based on exterior durable polyurethane/ acrylic resins, and utilising proven light fast pigments, the coating will give excellent exterior weathering properties, and has been tested in accordance with BS EN ISO4892-3: 2006 (QUV Test) using Lamp Type UVA351 accelerated weathering for 1600 hours.

In addition the applied coating exhibits good adhesion to the correctly prepared substrate and good hardness and scratch resistance. The coating is also supple and will not crack if the substrate bends.



Quick Links - Click To Jump To Section:




Features & Benefits


  • 10 year adhesion guarantee - 5 year colour fastness guarantee
  • Available in 4 pack sizes to suit the size of your project see `Paint Kit Contents`
  • Kits contain everything needed to ensure a high quality finish on uPVC windows, doors and fascias (Excluding any PPE required)
  • Suitable for use on composite doors
  • Water-based
  • Based on proven exterior durable polyurethane/acrylic resins
  • Available in 2400+ colours from British Standard, NCS and RAL
  • Can be colour matched to nearly any colour
  • Attractive smooth, satin finish
  • Brush application
  • Utilises proven light fast pigments
  • Excellent exterior weathering properties
  • Good adhesion, hardness and scratch resistance
  • Supple; will not crack if the substrate bends
  • Low odour
  • Quick drying



Paint Kit Contents


Pack A - (Expected to cover up to an approximate total surface area of 5m²)

  • This should cover, externally, 3 medium size window frames each with 2 openers
  • If you also want to paint one side of a door it will take about the same amount of paint as 1 medium size window frame
  • Pack A should be sufficient for the front external window frames of an average terraced house

Pack A Contents:



Pack B - (Expected to cover up to an approximate total surface area of 10m²)

  • This should cover, externally, 6 medium size window frames each with 2 openers
  • If you also want to paint one side of a door it will take about the same amount of paint as 1 medium size window frame
  • Pack B should be sufficient for the front external window frames of an average terraced house

Pack B Contents:



Pack C - (Expected to cover up to an approximate total surface area of 15m²)

  • This should cover, externally, the windows and doors of an average semi-detached house

Pack C Contents:



Pack D - (Expected to cover up to an approximate total surface area of 25m²)

  • This should cover, externally, the windows and doors of an average detached house, or the external window frames, doors and fascia, guttering etc. of a terraced house

Pack D Contents:



PPE requirements (not included in packs):

  • Good ventilation
  • Eye/face protection - Wear chemical splash goggles
  • Hand protection - Wear protective gloves made of the following material
    • Neoprene
    • Nitrile rubber
    • Rubber (natural, latex)
  • Other skin and body protection - Wear appropriate clothing to prevent any possibility of skin contact
  • Respiratory protection - Wear a respirator fitted with the following cartridge: Organic vapour filter

Refer to Material Safety Data Sheets for each product for full details.



Application Instructions


  1. If you are brush applying Kolorbond Aquatek you will require disposable gloves and possibly protective clothing. A face mask is not necessary but essential if you decide to spray apply (the mask will require a particulate filter).
  2. To reduce the chance of over painting it is a good idea to apply a layer of masking tape on glass and other adjoining substrates.
  3. Before starting to clean the surfaces to be painted, dilute the Vinylkleen, one part to three parts water. Thoroughly clean the surface using the diluted Vinylkleen on one of the cloths provided. Keep turning the cloth as it becomes dirty.
  4. Now lightly rub over all surfaces to be painted with the red abrasive pad. This will dull the surface but should not leave any scratch marks. If you are painting over wood grain foil, be careful not to rub too hard which can damage the wood grain finish.
  5. Now thoroughly clean again using a second cloth with Windowprep on it. This will remove any remaining contaminants and any dust produced earlier. Again, turn the cloth as it becomes dirty. Windowprep contains alcohols so please wear gloves to protect your skin from drying.
  6. When everything is dry you are ready to start painting. Firstly, stir the paint making sure that you stir right to the bottom of the can so that any settled colourants are fully mixed back in. Do not stir too vigorously as you do not want to create bubbles in the paint.
  7. Apply the paint using the brush provided of a good quality synthetic brush. For roller application you must add up to 20% KolorFlow (not supplied) to the paint. (KolorFlow slows the drying of the paint, so can also be used to keep a wet edge when brushing or to prevent the paint from drying too fast on a hot day).
  8. Brush on the paint in a nice even coat. Do not apply too much paint and then try to ‘work’ it. This paint dries too quickly and you can damage the finish.
  9. When the paint is dry, after about 15 minutes, apply a second even coat being careful not to leave deep brush marks.
  10. If you have a break during painting, make sure that you put your brush into water straight away. Should you allow the paint to dry on the brush you will have to throw the brush away. You will not get the dried paint off.
  11. Although Kolorbond Aquatek dries very quickly it take up to a week to fully cure so please treat it gently for the first few days. If you have an area you want to cure quickly you can apply hot air from a domestic hairdryer once the paint is totally dry. Do not, of course, get the paint too hot or you could damage it.
  12. On finishing painting, immediately wash out your brush and any other equipment with plenty of water.
  13. NOTE: When prepping and painting, as described above, you should always use the correct protective equipment to protect your eyes, skin, respiratory tract and cloths etc. i.e. protective gloves, eye protection, clothing covering and respiratory masks fitted with organic vapour filters.
  14. Always ensure that your working area is sufficiently ventilated.
  15. Please read technical and safety data sheets before commencing.
Product Details
KolorbondKit

Data sheet

Manufacturer
Technispray
Water / Solvent Based
Water
For Use On
uPVC, Hard Plastics, Powder Coatings, GRP, Wood, Composite Doors
Sheen
Satin
Single, Two or Three Pack
Single
Pack Size
5m² Pack
10m² Pack
15m² Pack
20m² Pack
Application
Brush, Spray
Recommended Thinner/Cleaner
Water
VOC
Ultra-Low (5-49 g/l)
Finish
Smooth
Hard Dry
24 hours
Flash Time (Between Coats)
15 minutes
Colour(s)
Fully Tintable
Exterior / Interior Use
Exterior & Interior Use
Suitable For Use On
GRP Glass-Reinforced Plastic
Suitable For Use On
Wood
Suitable For Use On
Hard Plastics
Suitable For Use On
uPVC
Finish
Satin
Finish
Smooth
Application Method
Brush
Application Method
Spray
Manufacturer
Kolorbond
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


questions Andrew  on 2022-03-12 17:33:02
Question: 

Hi - can I successfully paint over brown upvc with a light green colour? Will it cover OK?

Answer: 

Assuming the UPVC is clean, dry, sound and prepared as detailed in the technical data sheet yes.

Two coats are required.

questions Tim Hopcroft  on 2022-02-06 09:31:43
Question: 

Can this be painted onto brown foiled upvc windows, without the risk of the foil lifting ?

Answer: 

Yes, this can be applied to foiled UPVC windows assuming the foil is well adhered, they are clean, dry, sound and prepared as detailed in the technical data sheet.

The same guarantees of 10 year adhesion guarantee - 5 year colour fastness guarantee will apply.

questions Rob blacklock on 2021-11-10 22:25:15
Question: 

Hi, can this be used in a gravity fed spray gun with a small compressor?

Answer: 

Yes this can be applied with a gravity fed spray gun, the recommended setup and fluid tip size 2.0 - 2.2.


Question about the product

* Required fields
(read)
Send
You might also like

Technispray WindowPrep

Technispray WindowPrep is an alcohol based cleaner for use on PVCu prior to painting. It is very important that PVCu (uPVC) is cleaned with WindowPrep prior to painting; WindowPrep not only removes contaminants but also removes plasticizers from the surface of the PVCU and, additionally, opens the pores of the PVCu which greatly assists...

Price £14.00
In stock

Technispray Kolorbond Aquatek

Technispray Kolorbond Aquatek, a water-based, low-odour, quick-drying exterior and interior coating for PVCu (uPVC), hard plastics (including polyester powder coatings), GRP composite doors and primed MDF and wood available in 2400+ colours from British Standard, NCS and RAL with an attractive satin finish. Can be colour matched to nearly any...

Price £39.00
In stock

Technispray VinylKleen

Technispray VinylKleen is a water based cleaner for use on PVC and PVCu which removes water soluble contaminants and some silicones and oils. VinylKleen should be the first cleaner used before further cleaning with Technispray WindowPrep or Technispray VinylPrep. VinylKleen comes in a concentrated form and should be mixed 1 part VinylKleen...

Price £14.00
In stock

Technispray KolorFlow

Technispray KolorFlow, for use with Kolorbond Aquatek to avoid leaving brush marks or to keep a ‘wet edge’ on a warm day. Stir in 10% of KolorFlow (maximum 20%). This will slow the drying of the paint and assist leveling. The addition of KolorFlow also assists when spraying in hot weather.

Price £28.00
In stock