Quick Links - Click To Jump To Section:

   
• Features & Benefits
• Certifications
• Application
• Limitations

Features & Benefits

• Tough and long-lasting colours - Premium quality paint for optimal coverage with pigments selected for more resistance and colour durability
• Mineral matte finish
• Breathable, supports air flow and avoids condensation
• Washbility UNE EN ISO 11998 Class 1 - ideal for areas prone to soiling
• Excellent flexibility with no cracking
• High adherence
• Bases free of VOCs and formaldehyde emissions
• Cradle to Cradle Certified Silver

Certifications

Application

• The substrate must be dry, firm, well adhered, even and free of any impurities that could hinder the perfect bonding of the product
• Any organic growth and/or other impurities should be removed by thorough cleaning using specific products for this purpose
• Depending on the nature of the surface, the actions prior to application of the paint vary as follows:
  • Old glossy or satin paints and putties: clean the surface and sand softly
  • Absorbent substrates (e.g. concrete block or brick): apply AmbientPrimer
  • Very absorbent substrates (clay, adobe or rammed earth): apply Minerseal
  • Wood, metal (without corrosion or oxidation) or non-porous (e.g. glazed tiles, phenolic panel, epoxy or polyurethane paints): apply Four2Four 
• Can be primed with GCS Primer Interior
• Shake and dilute with water using 5-10% per litre of product (Approx. 100-150ml water p/L). Ensure good mixing. Avoid excessive shaking to minimise bubble occlusion
• Apply 2 or 3 coats evenly with roller, brush, airless or other type of projection. Paint in sections, starting with borders. Without overloading the roller, dip it lightly into the paint to spread evenly. Do not paint over areas that are drying and avoid splices. Please note that an excess of product per coat can generate micro- fissures
• Dries in 2-4 hours between coats and 24-hour drying time per coat at 25°C and 60% relative humidity
• Clean tools after use with warm water

Limitations

• Mineral substrates must be at least 28 days old
• Do not apply to surfaces in permanent contact with water
• For decorative glazing and/or the application of self- adhesive templates or other types of masking, please allow 36 hours to elapse
• Parts that are not going to be treated should be protected (glassware or carpentry)
• Should there be any strict aesthetic requirements, it is recommended to carry out preliminary tests
• Do not mix with other brands to maintain product efficacy