Bedec Interior-Flex Elastomeric Matt Emulsion
Manufacturer: Bedec
An elastomeric matt emulsion paint formulated to coat interior ceilings and walls. A unique product designed to bridge hairline cracks and flex with the substrate where movement causes cracking with conventional matt emulsion.
Product Description
Bedec Interior-Flex Elastomeric Matt Emulsion is an elastomeric matt emulsion paint formulated to coat interior ceilings and walls. Bedec Interior-Flex is a unique product designed to bridge hairline cracks and flex with the substrate where movement causes cracking with conventional matt emulsion.
Features & Benefits
- Smooth matt finish
- Flexible and breathable
- Fine crack bridging
- Wipeable when dry
- Excellent coverage
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Technical Data
| Typical Coverage (per coat) | 10m² per litre |
| Touch Dry | 2 Hours |
| Application | Brush, Roller, Spray |
| The figures stated above are approximate. Please ensure you refer to all datasheets for full application information. | |
Download
Questions
 Stanley Adamson on 02/03/2018 | Question: After using your paint will new cracks appear and if so would it be better to put lining paper on top of paint |
Answer: There is a possibility of cracks coming back if there is excessive movement, it really depends on how much movement there is in the substrate. There should be no reason that lining paper cannot be used over the top, just ensure that the paint has fully cured first. But again if the movement is enough to make the paint crack then we would assume that the lining paper would also crack. | |
| Diane Evans on 09/06/2015 | Question: Can you use Bedec Interior-Flex Elastomeric Matt Emulsion as a base coat and paint over it with a second coat of another make of emulsion in a different, darker colour? |
Answer: Yes you can, we recommend applying two coats of Bedec Interior-Flex Elastomeric Matt Emulsion before overcoating with your own water based emulsion, but try to make sure the product you choose also has good flexibility otherwise you may experience cracking over time as your walls move. Alternatively we can mix most colours in the Bedec Interior-Flex Elastomeric Matt Emulsion so it may be worth checking with us first to see if we can produce it in the colour you want to save you overcoating it. | |
Colour reproduction of the Products on the Site is limited by the technology used to deliver web pages and by the colour representation of Customer’s own monitor and computer set-up. We have made every effort to display as accurately as possible the colours of our Products but we cannot guarantee that the colour shown on Customer’s monitor’s display will accurately reflect the colour of the Product on delivery. We recommend that Customer first purchases the smallest Product available or access an industry standard colour chart in person (and not digitally) to ensure that the colour is acceptable for its purposes. For more information, please see our Terms & Conditions of Sale.
Close