Mathys Paracem Effects Primer
  • Mathys Paracem Effects Primer

Mathys Paracem Effects Primer

MAT1004

Mathys Paracem Effects Primer is a water based acrylic primer for interior porous surfaces prior to painting them with Mathys Paracem Effects Sand/Sable.

  • Reinforces the substrate and decreases absorption
  • For porous, non-painted surfaces
  • Ideal for bricks, plaster & concrete
Colour
Size
Finish
£25.71
VAT excluded

£30.86 Tax incl.
Quantity

Description

Mathys Paracem Effects Primer

Mathys Paracem Effects Primer is a white, water based acrylic primer for interior porous surfaces prior to painting them with Mathys Paracem Effects Sand/Sable.

Features & Benefits

  • Reinforces the substrate and decreases absorption
  • For porous, non-painted surfaces
  • Ideal for bricks, plaster & concrete

Technical Data

  • Density: ± 1,27
  • Gloss Level: Matt
  • Gloss level at 60º: Matt: ± 5%
  • Solids content in volume: 26 - 27%
  • Solids Content in weight: 41 - 43%

Drying Times At 20°C/RH 50%

  • Touch dry: 1,5 hours
  • Dry to recoat: 2-3 hours
  • Fully cured: 1 week

Theoretical Consumption

± 8 m²/l

Practical Consumption

Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application.

Surface Preparation

The substrate must be clean and degreased. Very porous substrates, smooth plaster and water-resistant plasterboard are to be impregnated first with a coat of Pegafix.

Application Conditions

> 5°C, < 80% R.H.

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Product Details
MAT1004

Data sheet

Application
Brush, Roller, Spray
Dry to Recoat (at 20°C)
2-3 hours
Fully Cured (at 20°C)
1 week
Coverage
8m² per litre
Min. Application Temperature
5°C
Density
± 1,27
Solids by Volume
26 - 27%
VOC
29 g/l
Shelf Life (from date of manufacture)
2 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C.
Touch Dry
1.5 hours
Recommended Dry Film Thickness
28 µm
Recommended Wet Film Thickness
100 µm
UN Number
Not regulated
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send