- There are no more items in your cart
- Shipping Calculated at checkout
- Total £0.00
Call 0113 245 5450 for Sales or Technical
Alternatively you can email our sales & support team on [email protected]
Coronavirus Updates - Open and Services as Normal (click for more info)
Mathys Paracem Deco Ceiling
833.1.4P
Mathys Paracem Deco Ceiling is a super covering and extra matt acrylic paint for ceilings and inner walls that can be applied on most mineral substrates providing an excellent one coat ceiling paint.
- Exceptional high covering power (covers mostly in 1 layer)
- Uniform matt finish without laps
- Delayed drying (enables to paint large surfaces)
- Odourless
- Extra matt
- Easy to apply
Description
Mathys Paracem Deco Ceiling
Mathys Paracem Deco Ceiling is a super covering and extra matt acrylic paint for ceilings and inner walls. Applicable on most mineral substrates it forms an excellent one coat ceiling paint.
Features & Benefits
- Exceptional high covering power (covers mostly in 1 layer)
- Uniform matt finish without laps
- Delayed drying (enables to paint large surfaces)
- Odourless
- Extra matt
- Easy to apply
| Technical Data | |
|---|---|
| Density: | 1,41 - 1,45 |
| Gloss Level: | Matt |
| Gloss level at 60º: Matt: | 2% |
| Solids content in volume: | 32 - 34% |
| Solids content in weight: | 52 - 54% |
| Drying Times At 20°C/RH 50% | |
|---|---|
| Dry to touch: | 2 Hours |
| Dry to recoat: | 4 Hours |
| Fully cured: | 1 Day |
Theoretical Consumption
6 - 8 m²/l per coat
Practical Consumption
Practical coverage depends on many factors such as porosity, roughness of the substrate and material losses during application.
Surface Preparation
- Always work on a dry and stable substrate
- Old cleaned layers in good condition and light porous substrates may be recoated directly with Paracem Deco Plafond.
- Very porous substrates, smooth plaster and water-resistant platerboard are to be impregnated first with Pegafix.
- Nicotine stains must be isolated with Pegamat RL or Pegaprim Isofix
- Unpainted woodwork must be treated appropriately first and a priming coat must be applied (e.g. Fassiprim or Pegaprim Xpress)
- Metal objects without rust spots are to be pre-treated with Pegalink, Pegaprim Xpress or Galvaprim.
Application Conditions
Minimum 5°C / Maximum 80% R.H.
| Application Methods | |
|---|---|
| Brush: | Apply undiluted |
| Roller: | Apply undiluted |
| Airless Spary | "If necessary, dilute with some water. Nozzle: 011 - 013 / Pressure: 200 bars, dilute with maximum 3% volume water. |
| Air Atomised Spray: | Not recommended |
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Product Details
833.1.4P
Data sheet
- Application
- Brush, Roller, Spray
- Dry to Recoat (at 20°C)
- 4 hours
- Fully Cured (at 20°C)
- 1 day
- Coverage
- 6m² per litre
- Min. Application Temperature
- 5°C
- Density
- 1,41 - 1,45
- VOC
- 28 g/l
- Shelf Life (from date of manufacture)
- 2 years from date of production when kept in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C.
- Touch Dry
- 2 hours
- Recommended Dry Film Thickness
- 45 µm
- Recommended Wet Film Thickness
- 140 µm
- UN Number
- Not regulated