Tor Tormastic Colour Coating is a gloss finish for wood, metal and cementitious substrates, normally applying over conventional primers and covering in one coat.
The finish is ideal for farm buildings and industrial renovations, available in more than 1,500+ colours from RAL, BS, NCS & NCS 2050, making a match to existing colour schemes and branding easier.
Features & Benefits
Gloss finish for wood, metal and cement
Available in 1,500+ colours from RAL, BS, NCS & NCS 2050
Economical - most colours require just one coat
Match existing colour schemes, branding, etc
Good colour stability
Ideal for use on farm buildings and industrial areas, especially for renovations
Most colours cover in a single coat
Some colours may require an undercoat or second topcoat.
Apply over conventional primers
Patch prime and use 2 coats for previously painted surfaces
Good coverage up to 12 square metres per litre
Apply by brush, roller or sprayer
Maximum heat resistance - 125°C.
Product Information
An inorganic and/or organic pigmented resin based paint, good colour stability, thinned with low aromatic white spirits.
Product reference
AK776
Volume solids
48% +/- 3% depending on colour
Typical thickness
37-42 microns dft from 83 microns wet
Theoretical coverage
12 square metres per litre at 40 microns dft
Practical coverage
Reduce above by up to 20% depending on substrates
VOC content
EU limit value for this product (cat A/d): 300 g/l. This product contains max 300 g/l VOC
Surface Preparation
Apply to suitably primed surfaces.
Some colours may require an undercoat or second topcoat.
Previously painted surfaces – patch prime where necessary. Apply one or two full coats of Tormastic over prepared surface.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Tor Tormastic Colour Coating is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
Tor General Purpose Thinner (TH10) - also known as Tor Tortread SP Thinners - is to be used for the thinning (where necessary) of general purpose primers, undercoats and finishes or for cleaning the same materials from brushes, rollers and trays immediately after application. More Information Delivery Info
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools)1 x Rust-Oleum...