HMG Satin Trim Paint

    DEC702
    HMG4551

    HMG Satin Trim Paint is a premium quality water-based, decorative and protective finish for use over correctly prepared joinery.

    • Ideal for windows, doors, soffits and fascias
    • Ease of use
    • Quick drying
    • Low odour
    • Available in 3,500+ colours, inc. RAL Classic, BS, NCS & the new NCS 2050 colours

    Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.

    Product customisation

    Don't forget to save your customization to be able to add to cart
    • 250 char. max
    Colour Group
    Size
    Finish
    £19.81(ex. VAT)
    £23.77 (inc. VAT)
    Quantity
    Please choose your colour
    Available for Delivery (See Delivery Options Below)

    Description

    HMG Satin Trim Paint is a premium quality water-based, decorative and protective finish for use over correctly prepared joinery.



    Click To Jump To Section:




    Features & Benefits


    • Ideal for windows, doors, soffits and fascias
    • Ease of use
    • Quick drying
    • Low odour



    Product Specification


    Technical Data
    HMG Satin Trim Paint NeurtralHMG Satin Trim Paint ColoursHMG Satin Trim Paint White
    Volume Solids:41.6%40.9%55.6%
    VOC Content:0.11 Kg/l0.11 Kg/l0.11 Kg/l
    SG:---
    Viscosity:1,750 mPas200 mPas10,500 mPas
    Density:1.086 g/cm³1.088 g/cm³1.306 g/cm³
    Storage Conditions:Store between 5°C - 25°C. When not in use, cans must be kept sealed.Store between 5°C - 25°C. When not in use, cans must be kept sealed.Store between 5°C - 25°C. When not in use, cans must be kept sealed.
    Shelf Life:12 months from delivery date in original sealed containers.12 months from delivery date in original sealed containers.12 months from delivery date in original sealed containers.
    Pot Life:---
    Flash Point:n/an/an/a



    Film Thickness Range And Coverage


    Product Data
     Dry Film ThicknessWet Film Thickness
    Brush30μm80μm
    Roller30μm80μm
    Compliant Spray Gun30μm80μm



    Coverage: 12 square metres per litre @ 30 microns dft (Theoretical).

    • HMG technical data sheets indicate a dry film thickness that will be achieved when applying a particular wet film thickness.
    • These values are a guide only and are not to be used as specifications.
    • Film thickness will vary depending on actual use and specification.
    • Great care should be taken to achieve the dft stated in the agreed specification and to avoid areas of excessively low or high thickness.



    Drying Times


    Drying Times At 20°C
    Touch Dry:30 minutes
    Dry To Recoat:4 - 6 hours dependant on wft and drying conditions e.g. temperature and air movement. If not fully ready, dragging and film damage may occur.
    Fully Cured:24 hours



    Surface Preparation


    • Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants.
    • Read and follow the safety data sheet, product data sheet and label instructions.
    • Stir all paints thoroughly before use.
    • Always use the same batch number on the same job.
    • Check colour & sheen.
    • Filter the product immediately before use.
    • Reduce emissions and maintain quality by replacing tin lid after use.



    Application Methods


    Technical Data
    BrushRollerCompliant Spray Gun
    Mixing Ratio:Ready for useReady for useBase: 1
    --Thinner: >10%
    Thinner Options:--Water
    Viscosity:---
    Spray Gun Setup:---
    Number Of Coats (Guide Only):1 - 2 coats1 - 2 coats1 - 2 coats
    Flash Off:---



    For further information on mixing ratios please contact Rawlins Paints on Tech - 0113 2455450 (option 2) or [email protected] Sales - 0113 2455450 or [email protected]



    Product Notes


    Information On Basic Physical And Chemical Properties
    HMG Satin Trim Paint NeurtralHMG Satin Trim Paint ColoursHMG Satin Trim Paint White
    Form:According to product specificationAccording to product specificationAccording to product specification
    Colour:According to product specificationAccording to product specificationAccording to product specification
    Odour:CharacteristicCharacteristicCharacteristic
    Odour Threshold:Not determinedNot determinedNot determined
    pH-value 20°C:Not determinedNot determinedNot determined
    Melting point/freezing point:UndeterminedUndeterminedUndetermined
    Initial boiling point and boiling range:100°C100°C100°C
    Flash Point:Not applicableNot applicableNot applicable
    Flammability (solid, gas):Not applicableNot applicableNot applicable
    Ignition temperature:370°C370°C370°C
    Decomposition temperature:Not determined.Not determined.Not determined.
    Auto-ignition temperature:Product is not selfigniting.Product is not selfigniting.Product is not selfigniting.
    Explosive properties:"Product is not explosive. However, formation of explosive air vapour mixtures are possible.""Product is not explosive. However, formation of explosive air vapour mixtures are possible.""Product is not explosive. However, formation of explosive air vapour mixtures are possible."
    Explosion limits: Lower:Not determinedNot determinedNot determined
    Explosion limits: Upper:Not determinedNot determinedNot determined
    Vapour pressure at 20°C:23 hPa23 hPa23 hPa
    Density at 20°C:1.086 g/cm³1.088 g/cm³1.306 g/cm³
    Relative density:Not determinedNot determinedNot determined
    Vapour density:Not determinedNot determinedNot determined
    Evaporation rate:Not determinedNot determinedNot determined
    Solubility in / Miscibility with water:Fully miscibleFully miscibleFully miscible
    Partition coefficient: n-octanol/water:Not determinedNot determinedNot determined
    Viscosity: Dynamic at 20°C:1,750 mPas200 mPas10,500 mPas
    Viscosity: Kinematic:Not determinedNot determinedNot determined
    Solvent content: Organic solvents:5.4% - Water: 52.9%5.8% - Water: 53.3%3.5% - Water: 40.8%
    Solids content:41.6%40.9%55.6%



    Health & Safety


    • Refer to the safety data sheet in the attachments section above and tin label prior to use.
    • Suitable respiratory equipment should be worn when spraying.

    Click to go back to the top of the page

    Product Details
    4551-834870

    Data sheet

    Manufacturer
    HMG Paints Limited
    Water / Solvent Based
    Water
    For Use On
    Wood
    Application Method
    Brush, Roller, Spray
    Sheen
    Satin
    Colour
    Standard / Ready Mixed, Fully Tintable
    VOC Levels
    Low (50-149 g/l)
    Single, Two or Three Pack
    Single
    Pack Size
    1L
    2.5L
    5L
    Touch Dry (at 20°C)
    30 minutes
    Dry to Recoat (at 20°C)
    4 - 6 hours dependant on wft and drying conditions e.g. temperature and air movement. If not fully ready, dragging and film damage may occur.
    Fully Cured (at 20°C)
    24 hours
    Density
    HMG Satin Trim Paint Neurtral: 1.086 g/cm³ - HMG Satin Trim Paint Colours: 1.088 g/cm³ - HMG Satin Trim Paint White: 1.306 g/cm³
    Solids by Volume
    HMG Satin Trim Paint Neurtral: 41.6% - HMG Satin Trim Paint Colours: 40.9% - HMG Satin Trim Paint White: 55.6%
    VOC
    0.11 Kg/l
    Shelf Life (from date of manufacture)
    12 months from delivery date in original sealed containers.
    Recommended Dry Film Thickness
    30μm
    Base Type
    Water-Based
    Suitable For Use On
    Wood
    Suitable For Use On
    Windows
    Suitable For Use On
    Fascias
    Suitable For Use On
    Doors
    Suitable For Use On
    Soffits
    Finish
    Satin
    Application Method
    Roller
    Application Method
    Brush
    Application Method
    Spray
    Product Usage Type
    Topcoat
    Type of Wood Finish
    Wood Paint
    Suitable For
    Interior Doors, Windows & Trim
    Colour Family
    Black
    Colour Family
    Blue
    Colour Family
    Neutral
    Colour Family
    Brown
    Colour Family
    Stone
    Colour Family
    Orange
    Colour Family
    Beige
    Colour Family
    Yellow
    Colour Family
    Green
    Colour Family
    White
    Colour Family
    Red
    Colour Family
    Metallic
    Colour Family
    Pink
    Colour Family
    Anthracite Grey
    Colour Family
    Purple
    Colour Family
    Grey
    Attachments
    Download


    Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


    Be the first to ask a question about this product!


    Question about the product

    * Required fields
    (read)
    Send

    IMPORTANT SHIPPING & DELIVERY INFORMATION

    HMG Satin Trim Paint is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

    Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

    Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

    All delivery costs below are excluding VAT