Coo-Var Brick & Tile Paint WB

Manufacturer:

Coo-Var Brick & Tile Paint WB is a water-based paint that improves and protects the facade of any brick property. Provides a flat brick red finish.

ADVANTAGES

  • Great for domestic use
  • Decorative
  • Protects
  • Versatile
  • Apply direct
  • Faster drying time
  • Gloss, solvent-based version available
Bulk Buy

£14.09 tax excl.

£16.91   tax incl.

Product Description

Coo-Var Brick & Tile Paint WB is a water based paint that improves and protects the facade of any brick property. Provides a flat brick red finish to stone, concrete, plaster, render, bricks, etc.

Recommended Uses

  • Stone
  • Concrete
  • Plaster
  • Render
  • Bricks

A solvent based gloss version is available here: Coo-Var Brick & Tile Paint SB

Application

Apply with brush, roller or spray.

Brush wash/thinners – Water

Recommended Dried Film Thickness Per Coat: 35-40 microns
Recommended Wet Film Thickness Per Coat: 75 microns

Drying time

Touch dry 30 minutes

Hard dry 2 hours

Overcoat time

6 hours

Do not apply in cold, damp temperatures lower than 2°C

Estimated coverage: 13m2/litre

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Technical Data

Typical Coverage (per coat)13m² per litre
Touch Dry30 Mins
ApplicationBrush, Roller
The figures stated above are approximate. Please ensure you refer to all datasheets for full application information.

Download

Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Questions



Be the first to ask a question about this product!

Question about the product

* Required fields
Send

The question has been correctly sent

Free delivery

On orders over
£75.00 + VAT

Low trade prices

Our best trade prices on everything!

Technical Advice

Fast FREE Technical Advice for Products & Projects

Click & collect

Order and collect from
our Leeds based trade store.
silent-exothermic unable