Please note: it is important to check that any alternative product is suitable for your requirements, as our suggestion is given in good faith but without warranty. If you are in any doubt please first contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to discuss your project.
Mathys Paracem Deco Ultra Clean Xtra Matt is a highly washable alkaline emulsion, water-based interior wall paint with a lasting extra matt aspect. This decorative paint is available in white and in almost all possible colours, ranging from light to dark shades.
Excellent washability - Scrub resistance class 1
Not glossy
Limited writing effect in dark colors
Good coverage
Excellent flow
Optimally cleanable
Permanent extra matt aspect
Available in 4,400+ colours, inc. RAL, RAL Design, BS, NCS & the new NCS 2050 colours
Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.
Mathys Paracem Deco Ultra Clean Xtra Matt is a highly washable alkaline emulsion, water-based interior wall paint with a lasting extra matt aspect. This decorative paint is available in white and in almost all possible colours, ranging from light to dark shades.
Recommended Use:
Perfect for interior walls that need regular cleaning (e.g. children’s rooms, kitchens, etc.). Suitable for most substrates (plaster, brick, concrete, etc.) in public and private buildings. No 'white marking' occurs with darker colours.
2 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5 and 35°C.
Flash Point:
Closed cup: Not applicable.
Film Thickness Range And Coverage
Product Data
Dry Film Thickness
Wet Film Thickness
Brush:
53 µm (white)
123 µm (white)
Roller:
53 µm (white)
123 µm (white)
Airless Spray:
53 µm (white)
123 µm (white)
Theoretical Coverage:
8 m²/l/coat
Practical Coverage:
Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application.
Drying Times
Drying Times at 20°C
Touch Dry
2 hours
Dry To Handle
2 hours
Dry To Recoat
6 hours
Fully Cured
30 days
Surface Preparation
The surface must be dry and free of dust and grease.
You can paint Paracem Deco Ultra Clean Xtra Matt directly over clean, old layers of paint that are still in good condition and onto surfaces that are not too porous.
You must treat porous surfaces with Paracem Deco Primer first. Highly porous surfaces, smooth plaster, and water-resistant plasterboard must be impregnated with Pegafix first.
Old damp spots must be isolated with Pegamat RL or Pegaprim Isofix.
Unpainted woodwork must be treated appropriately first and a priming coat must be applied (e.g. Fassiprim Aqua or Pegaprim Xpress).
Metal objects without rust spots are to be pre-treated with Pegalink , Pegaprim Xpress. On glass fibre, apply preferably first a coat of Paracem Deco Primer before finishing with 2 coats of Paracem Deco Ultra Clean Xtra Matt
Application Methods
Technical Data
Application Conditions:
> 8°C, < 80% R.H
Application & Thinning: Brush
Apply undiluted with brush with synthetic bristles.
Application & Thinning: Roller
Apply undiluted with a 10 mm micro fiber roller.
Application & Thinning: Airless Spray
Nozzle: 0.017 - 0.021 / Pressure: 180 bars (only recommended for white and base P)
Cleaning of Equipment/Spills
Clean the material with water and dispose of the residue appropriately.
Do not apply at temperatures below +8°C.
Not recommended for use in damp rooms (eg bathrooms).
Cleaning instructions: Remove the contamination as soon as possible. Most contamination can easily be removed with a soft, damp cloth. Use lukewarm water and a mild colourless detergent. Do not use abrasive cleaning products.
Do no use excessive pressure when cleaning as this may result in removing paint which will leave marks.
For more serious contaminations first wipe the substrate with a soft damp cloth, then use Mathys Multi-cleaner (diluted 1:100). Allow to dry.
The best cleaning results are achieved after the Paracem Deco Ultra Clean Xtra Matt has dried for minimum 30 days.
Although extensive evaluations have been undertaken to ensure the cleanability of the Paracem Deco Ultra Clean Xtra Matt it might be possible that some contamination is difficult to remove and leaves traces. Touching the paint may leave marks this is due to the matt nature of the product (the marks will be more visible on dark colours).
Product Notes
,
Information On Basic Physical And Chemical Properties
Mathys Paracem Deco Ultra Clean Xtra Matt
Information on basic physical and chemical properties. Colour:
Not available.
Physical State
Liquid
Odour:
Not available
Odour Threshold:
Not available
pH-value:
8 to 9
Melting point/freezing point:
0°C
Initial boiling point and boiling range:
>100°C
Flash Point:
Closed cup: Not applicable
Evaporation rate:
<1 (butyl acetate = 1)
Flammability (solid, gas):
Non-flammable in the presence of the following materials or conditions: open flames, sparks and static discharge, heat and shocks and mechanical impacts. Nonflammable, but will burn on prolonged exposure to flame or high temperature.
Explosion limits: Lower:
Not available
Explosion limits: Upper:
Not available
Vapour pressure at 20°C:
2,3 kPa [room temperature]
Vapour density:
>1 [Air = 1]
Relative density:
1,48 to 1,52
Solubility(ies):
Soluble in the following materials: cold water and hot water. Very slightly soluble in the following materials: methanol and acetone.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Mathys Paracem Deco Ultra Clean Xtra Matt is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
Mathys Pegafix is a colourless impregnating primer for porous, mineral substrates such as concrete, breeze block, bricks, etc. before painting them with waterborne paints.High fixing capacity Superior penetration characteristics Water basedMore Information Delivery Info
We no longer stock this product, but can recommend Zinsser Bulls Eye 1-2-3 as a great alternative. Please note: it is important to check that any alternative product is suitable for your requirements, as our suggestion is given in good faith but without warranty. If you are in any doubt please first contact our technical team on 0113 2455450...
Rust-Oleum Mathys Pegalink Universal Adhesion Primer is a water based primer for indoor and outdoor use. Adheres to many surfaces: wood, gypsum, cement, bricks and especially on smooth and difficult to adhere to surfaces like: galvanised steel, copper, zinc, polycarbonate, hard PVC, Pegagraff Hydro, etc.Excellent adhesion Flexible...
General Painting Application Kit from Rawlins Paints provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site.Provides an economical way of making sure you will have what you need Ideal for interior and exterior paint projects Click to jump down to...
We no longer stock this product, but can recommend Zinsser Bulls Eye 1-2-3 as a great alternative. Please note: it is important to check that any alternative product is suitable for your requirements, as our suggestion is given in good faith but without warranty. If you are in any doubt please first contact our technical team on 0113 2455450...