Teamac P101 2 Pack Polyurethane Topcoat
Teamac P101 2 Pack Polyurethane Topcoat is a high performance polyurethane topcoat for demanding environments. Ideal for floors, walls, structures inside and out requiring protection against chemicals, graffiti attack, high levels of traffic and more. Teamac P101 2 Pack Polyurethane Topcoat is light stable so will not fade or yellow when exposed to high levels of ulta violet light.
Teamac P101 2 Pack Polyurethane Topcoat is an aliphatic polyurethane topcoat that is light stable so will not fade or yellow when exposed to high levels of ulta violet light. Teamac P101 2 Pack Polyurethane Topcoat is used as a coating that will not support fungus growth and is easily cleaned of surface contaminants. Ideal for marine applications on GRP, wood, ferro concrete and suitably primed metals. It can be used over compatible water based paints but is not recommended for use over conventional single pack solvent based paints.
Features & Benefits:
- Hard wearing high gloss finish
- Available in clear, a range of specially produced colours and the full RAL and BS colour range.
- Excellent anti-graffiti properties
Teamac P101 2 Pack Polyurethane Topcoat is supplied in two containers: one larger than the other and labelled Base. The other smaller one labelled Hardener. The contents of the pack marked Hardener are added to the contents of the larger pack marked Base and thoroughly mixed together, preferably by slow speed electric mixer for 2 minutes or until thoroughly mixed. Failure to mix the material correctly will lead to uncured areas in the coating.
All surfaces should be laitence free, clean, dry, sound and free from contaminants.
Prime porous ferro concrete surfaces with, Coo-Var Two Pack High Performance Primer. Metal surfaces should be suitably primed. (Teamac Etch Primer for aluminium, Teamac 2 Pack Zinc Phosphate Primer for steel.)
Apply between 5 to 30°C by brush or short nap mohair roller. This product can also be spray applied in approved conditions. When brush or roller applied at ambient temperatures - these products do not emit free Isocyanate at above levels recommended by C.O.S.H.H. Regulations. However, the protective measures shown on the product labels and safety data sheets must be followed. When used at elevated temperatures or atomised (sprayed) these products do emit small amounts of free Isocyanate and should only be sprayed in an atmosphere controlled working area, with suitable ventilation or flame proof extraction of air. Operatives must wear suitable protective clothing and separate air fed breathing apparatus. It is recommended that spraying of these products be avoided wherever possible to facilitate uncomplicated application and site conditions.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
|Typical Coverage (per coat)||7 - 8m² per kg|
|Touch Dry||4 Hours|
|Application||Brush, Roller, Spray|
|The figures stated above are approximate. Please ensure you refer to all datasheets for full application information.|
Be the first to ask a question about this product!
Colour reproduction of the Products on the Site is limited by the technology used to deliver web pages and by the colour representation of Customer’s own monitor and computer set-up. We have made every effort to display as accurately as possible the colours of our Products but we cannot guarantee that the colour shown on Customer’s monitor’s display will accurately reflect the colour of the Product on delivery. We recommend that Customer first purchases the smallest Product available or access an industry standard colour chart in person (and not digitally) to ensure that the colour is acceptable for its purposes. For more information, please see our Terms & Conditions of Sale.Close