"

Zinsser Gardz

Zinsser Gardz View larger
Typical Coverage (per coat)5-10m² per litre
Touch Dry30 Mins
ApplicationBrush, Roller, Spray
The figures stated above are approximate. Please ensure you refer to all datasheets for full application information.

A unique water-based sealer for porous and potential problem surfaces. Gardz® is formulated to deeply penetrate and dry to a hard, moisture resistant film that seals and binds down porous, chalky and crumbling surfaces, paints and textured finishes.

Read Full Description

More details

£9.75 + VAT

A unique water-based sealer for porous and potential problem surfaces. Gardz® is formulated to deeply penetrate and dry to a hard, moisture resistant film that seals and binds down porous, chalky and crumbling surfaces, paints and textured finishes.

Gardz® takes the “problem” out of problem surfaces. Deeply penetrating, it dries to a rock-hard, water-resistant finish; this protects surfaces from damage during the next redecorating project.

Gardz® is recommended for damaged drywall, new drywall, spackling and joint compound skim coats, plaster, calcimine, uncoated wallpaper, wallcovering adhesive residue, textured paint and more.

Key features and benefits
• Repairs torn paper on damaged drywall, eliminates bubbles
• Seals old wallpaper adhesive
• Water-based, low odour, dries clear
• Dries fast to a hard, moisture-proof film
• Binds down chalky surfaces
• Can be applied to high-pH surfaces
• Cleans up with soap and water

Send us your question

Question

We have a problem internal wall. It was originally builtas an external wall late 18th/early 19th century of mixed north pennine stone with lime mortar. For about 45 years it has been used an an internal wall, covered with gypsum plaster and paint. In patches something causes any paint applied to bubble after about 6 months. Would this product help to solve the problem ?

Nick from Barnard Castle (England) - 02/01/17

Answer

Based on your description we would recommend using Zinsser AllCoat (Solvent-Based) and leave this as the finish. Zinsser AllCoat (Solvent-Based) is breathable and will let traces of moisture through the paint film without causing the coating to bubble up, it also has good resistance to high pH.

Zinsser Gardz would seal the substrate and could cause a build up of moisture behind the coating resulting in blisters forming over time.

I have grease stains on my emulsion wall, can I use this as a blocker before reprinting?

Geraldine from Wolves (Uk) - 17/06/16

Zinsser Gardz is not a stain blocker, you would need to clean the area well to remove as much grease as possible then apply Zinsser B-I-N

Best recommendations are to spot prime the stain, allow to dry for a minimum of 45mins before applying a full coat to the whole area or to a natural break, allow to dry for another 45mins and then apply your chosen decorative finish (paint or wallpaper).

Can I paint over this with gloss paint or silk paint?

muriel dyga from fraserburgh (scotland) - 11/02/16

Nearly all conventional decorative finishes can be used over Zinsser Gardz including emulsions, wallpaper, solvent based primer, undercoat and gloss.

Is Zinsser Gardz effective in stabilising distemper coated ceilings?

robert jones from Chelmsford (Essex) - 16/06/15

No, we don't recommend water based products to be used over distemper. We would recommend either Zinsser Grade 1 or Zinsser AllCoat (Solvent-Based).

Question about the product

I have read and agree to the Conditions of Use (read) Send

The question has been correctly sent

Free delivery on orders over £75 (terms & conditions)

• Deliveries will be made within 3 working days (standard delivery)
• You must be UK mainland based for the free delivery offer.
• Postcodes listed are excluded from the free delivery and priced below.

Please note: deliveries will need to be signed for at the point of delivery.

UK Mainland OnlyUp to £75.00£75.01 +
Standard (2/3 working days)£8.00FREE
Next Day£15.00£15.00
Next day before 09:00am£30.00£30.00
Next day before 10:30am£25.00£25.00
Next day before 12:00pm£20.00£20.00
Saturday Delivery£35.00£35.00














£25 (Standard 2-3 Day Delivery Only)

AB30, AB31, AB32, AB33, AB34, AB35, AB36, AB37, AB38, AB44, AB45, AB46, AB47, AB48, AB49, AB50, AB51, AB52, AB53, AB54, AB55, AB56, FK, G83, IV, KW1, KW2, KW3, KW4, KW5, KW6, KW7, KW8, KW9, KW10, KW11, KW12, KW13, KW14, PA, PH, HS, KA27, KA28, ZE

£35 (Standard 2-3 Day Delivery Only)

BT, IM

£50 (Standard 2-3 Day Delivery Only)

JE, GY

Please note that all carriage prices are quoted without V.A.T. at the current rate.

Scottish Islands - outside standard distribution area, please contact us for a quote.

There may be an exception for heavy goods when purchased in quantity where we will contact you to advise any additional charges.

Next Day delivery and Saturday Service is available on stocked items for orders received before 11:00am only.

Because of the nature of our products, we use specially selected carriers to ensure safe and prompt delivery to you.

Please note: Any time or date named by Rawlins Paints Limited for delivery is given and intended as an estimate only and Rawlins Paints Limited shall not be liable to make good any damage or loss whether arising directly or indirectly out of a delay in delivery. Deliveries are made using a reliable nationwide carrier. Although over 99% of consignments arrive on time, we recommend that no labour is employed to undertake work until materials have arrived on site.

Zinsser Gardz TDS

Download

Zinsser Gardz MSDS

Download
IMPORTANT
Whilst every effort is made to ensure our data sheets are up to date, we advise you check the latest revision directly with the manufacturer to ensure you have the most current version.
E J Rawlins & Co. Ltd trading as Rawlins Paints make available product data sheets and information in good faith but without warranty. We do not accept liability for any errors or omissions contained within the data sheets or any outdated versions.