"

Teamac P101 2 Pack Polyurethane Topcoat

Teamac P101 2 Pack High Performance Finish View larger
Typical Coverage (per coat)7 - 8m² per kg
Touch Dry4 Hours
ApplicationBrush, Roller, Spray
The figures stated above are approximate. Please ensure you refer to all datasheets for full application information.

Teamac P101 2 Pack Polyurethane Topcoat is a high performance polyurethane topcoat for demanding environments. Ideal for floors, walls, structures inside and out requiring protection against chemicals, graffiti attack, high levels of traffic and more. Teamac P101 2 Pack Polyurethane Topcoat is light stable so will not fade or yellow when exposed to high levels of ulta violet light.

Read Full Description

More details

£30.62 + VAT

Teamac P101 2 Pack Polyurethane Topcoat is an aliphatic polyurethane topcoat that is light stable so will not fade or yellow when exposed to high levels of ulta violet light. Teamac P101 2 Pack Polyurethane Topcoat is used as a coating that will not support fungus growth and is easily cleaned of surface contaminants. Ideal for marine applications on GRP, wood, ferro concrete and suitably primed metals. It can be used over compatible water based paints but is not recommended for use over conventional single pack solvent based paints.

Features & Benefits:

  • Hard wearing high gloss finish
  • Available in clear, a range of specially produced colours and the full RAL and BS colour range.
  • Excellent anti-graffiti properties

Mixing:

Teamac P101 2 Pack Polyurethane Topcoat is supplied in two containers: one larger than the other and labelled Base. The other smaller one labelled Hardener. The contents of the pack marked Hardener are added to the contents of the larger pack marked Base and thoroughly mixed together, preferably by slow speed electric mixer for 2 minutes or until thoroughly mixed. Failure to mix the material correctly will lead to uncured areas in the coating.

Preparation:

All surfaces should be laitence free, clean, dry, sound and free from contaminants.

Prime porous ferro concrete surfaces with, Coo-Var Two Pack High Performance Primer. Metal surfaces should be suitably primed. (Teamac Etch Primer for aluminium, Teamac 2 Pack Zinc Phosphate Primer for steel.)

Application:

Apply between 5 to 30°C by brush or short nap mohair roller. This product can also be spray applied in approved conditions. When brush or roller applied at ambient temperatures - these products do not emit free Isocyanate at above levels recommended by C.O.S.H.H. Regulations. However, the protective measures shown on the product labels and safety data sheets must be followed. When used at elevated temperatures or atomised (sprayed) these products do emit small amounts of free Isocyanate and should only be sprayed in an atmosphere controlled working area, with suitable ventilation or flame proof extraction of air. Operatives must wear suitable protective clothing and separate air fed breathing apparatus. It is recommended that spraying of these products be avoided wherever possible to facilitate uncomplicated application and site conditions.

Send us your question

Be the first to ask a question about this product!

Question about the product

I have read and agree to the Conditions of Use (read) Send

The question has been correctly sent

Free delivery on orders over £75 (terms & conditions)

• Deliveries will be made within 3 working days (standard delivery)
• You must be UK mainland based for the free delivery offer.
• Postcodes listed are excluded from the free delivery and priced below.

Please note: deliveries will need to be signed for at the point of delivery.

UK Mainland OnlyUp to £75.00£75.01 +
Standard (2/3 working days)£8.00FREE
Next Day£15.00£15.00
Next day before 09:00am£30.00£30.00
Next day before 10:30am£25.00£25.00
Next day before 12:00pm£20.00£20.00
Saturday Delivery£35.00£35.00














£25 (Standard 2-3 Day Delivery Only)

AB30, AB31, AB32, AB33, AB34, AB35, AB36, AB37, AB38, AB44, AB45, AB46, AB47, AB48, AB49, AB50, AB51, AB52, AB53, AB54, AB55, AB56, FK, G83, IV, KW1, KW2, KW3, KW4, KW5, KW6, KW7, KW8, KW9, KW10, KW11, KW12, KW13, KW14, PA, PH, HS, KA27, KA28, ZE

£35 (Standard 2-3 Day Delivery Only)

BT, IM

£50 (Standard 2-3 Day Delivery Only)

JE, GY

Please note that all carriage prices are quoted without V.A.T. at the current rate.

Scottish Islands - outside standard distribution area, please contact us for a quote.

There may be an exception for heavy goods when purchased in quantity where we will contact you to advise any additional charges.

Next Day delivery and Saturday Service is available on stocked items for orders received before 11:00am only.

Because of the nature of our products, we use specially selected carriers to ensure safe and prompt delivery to you.

Please note: Any time or date named by Rawlins Paints Limited for delivery is given and intended as an estimate only and Rawlins Paints Limited shall not be liable to make good any damage or loss whether arising directly or indirectly out of a delay in delivery. Deliveries are made using a reliable nationwide carrier. Although over 99% of consignments arrive on time, we recommend that no labour is employed to undertake work until materials have arrived on site.

P101 2 Pack Polyurethane Topcoat TDS

Download

P101 2 Pack Polyurethane Topcoat Clear Base MSDS

Download

P101 2 Pack Polyurethane Topcoat Colours Base MSDS

Download

P101 2 Pack Polyurethane Topcoat Hardener MSDS

Download
IMPORTANT
Whilst every effort is made to ensure our data sheets are up to date, we advise you check the latest revision directly with the manufacturer to ensure you have the most current version.
E J Rawlins & Co. Ltd trading as Rawlins Paints make available product data sheets and information in good faith but without warranty. We do not accept liability for any errors or omissions contained within the data sheets or any outdated versions.