• Rust-Oleum 2102 Adhesion Primer
    • Rust-Oleum 2102 Adhesion Primer

    Rust-Oleum Hard Hat 2102 Adhesion Primer

    2102

    We no longer stock this product; please contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to find an alternative product.

    Rust-Oleum Hard Hat 2102 Adhesion Primer should be used on galvanized steel, stainless steel, aluminium, copper, glass, porcelain and other smooth, dense surfaces followed by Rust-Oleum Hard Hat Topcoats.

    • Ready to recoat after 30 minutes (within 24 hours)
    • Durable adhesion to difficult substrates
    • Special fan spray nozzle for a uniform application
    • Large coverage: 5.5m² per aerosol

    Quantity
    Product not available
    This Product has been Discontinued

    Description

    Rust-Oleum Hard Hat 2102 Adhesion Primer

    Rust-Oleum Hard Hat 2102 Adhesion Primer should be used on galvanized steel, stainless steel, aluminium, copper, glass, porcelain and other smooth, dense surfaces followed by Rust-Oleum Hard Hat Topcoats. Intended for small maintenance jobs. Should be used in light industrial exposures, normal humidity and interior applications.

    Features & Benefits

    • Durable adhesion to galvanised, stainless steel, aluminium, copper, hard PVC, glass and ceramics
    • Ready to recoat after 30 minutes (within 24 hours)
    • Ideal with Rust-Oleum Hard Hat Topcoats
    • Durable adhesion to difficult substrates
    • Transparent blue appearance
    • Special fan spray nozzle for a uniform application
    • Large coverage: 5.5m² per aerosol

    Technical Data 

    • Propellant: Dimethyl ether
    • Heat Resistance: 100°C (dry heat)

    Drying Times At 20°C/RH 50%

    • Touch dry: Remains tacky
    • Dry to handle: Remains tacky
    • Dry to recoat: After 30 minutes but within 24 hours

    Surface Preparation
    Remove dirt, grease, oil and all other surface contaminants by appropriate means. Remove previous coatings completely e.g. with Rust-Oleum Nr.1 Green Paint Stripper. The surface must be clean and dry during application.

    Directions for Use
    Remove cover cap. Shake vigorously for at least one minute after the rattle of mixing ball is heard. Shake frequently during use. Hold can at least 25cm from surface. Use back and forth motion keeping can parallel with surface. Ensure that can is in motion when spray button is pressed to avoid runs and sags. Apply a single, thin layer and avoid application of thick layers. After use turn can upside down and press spray button for 2 - 3 seconds to clean valve.

    Application Conditions
    For good results the relative humidity shall be below 85% and the temperature of the can and substrate above 0°C.

    Remarks
    Recoat as soon as possible after 30 minutes to avoid dust/dirt entrapment in the tacky coat.

    Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.

    Product Details
    2102

    Data sheet

    Application
    Spray
    Dry to Handle (at 20°C)
    Remains tacky
    Dry to Recoat (at 20°C)
    After 30 minutes but within 24 hours
    Min. Application Temperature
    0°C
    Heat Resistance (up-to)
    100°C (dry heat
    VOC
    730 g/l
    Shelf Life (from date of manufacture)
    5 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C.
    Touch Dry
    Remains tacky
    UN Number
    UN 1950
    Consumption
    5.5 m² per spray can
    Attachments
    Download


    Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


    Be the first to ask a question about this product!


    Question about the product

    * Required fields
    (read)
    Send

    IMPORTANT SHIPPING & DELIVERY INFORMATION

    Rust-Oleum Hard Hat 2102 Adhesion Primer is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

    Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

    Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

    All delivery costs below are excluding VAT


    You might also like

    Rust-Oleum Nr.1 Green Paint Stripper

    Rust-Oleum Nr.1 Green Paint Stripper is a paint stripper for the quick removal of old paint and is intended to remove all types of oil and alkyd based paints, emulsion paints, varnish and most two-component materials from metal, mineral and wooden substrates.Unique foam product for difficult to reach places  For metal, wood, concrete and...

    Price £13.43 (ex. VAT)

    £16.12 (incl. VAT)

    £13.43 (ex. VAT)

    In Stock and Available for Delivery