"

Fire Door Paint (30/60min)

Fire Door Paint (30/60min) View larger
ApplicationBrush, Roller
The figures stated above are approximate. Please ensure you refer to all datasheets for full application information.

This Envirograf system offers a white or coloured solution to upgrading wood doors to 30 or 60 minute fire doors. These packs have been created to help users ensure they are purchasing sufficient materials for their project. Each pack contains the correct amount of Primer, Intumescent and Undercoat to ensure protection is achieved inline with the manufacturers recommendations.

Read Full Description

More details

£78.79 + VAT

This Envirograf system offers a white or coloured solution to upgrading wood doors to 30 or 60 minute fire doors (subject to suitability) by using Envirograf intumescent coatings. These packs have been created to help users ensure they are purchasing sufficient materials for their project. Each pack contains the correct amount of Primer (Envirograf HWAP/WB Primer), Intumescent (Envirograf HW01 White Intumescent Coating) and Undercoat (Envirograf HW04/S Undercoat) to ensure protection is achieved inline with the manufacturers recommendations to the respective area in question.

These packs offer the white or coloured paint system coatings ONLY, if you require intumescent card for your doors please contact our Technical Department. This system offers a clear primer, white intumescent and white undercoat sufficient for 4m², 10m² or 20m² of door surfaces which when applied and dry is intended to be overcoated with your own decorative topcoat.

If you are looking for a clear finish, we also stock our Fire Door Varnish.

Please download and read 'Door Upgrading Technical Data' before purchase, download from the 'DATASHEETS' tab above or from HERE.

Features & Benefits

  • Certificate of Supply available
  • Helps comply with Building Regulation requirements
  • Keeps the period look and feel of doors
  • Clear or coloured versions available
  • Can be used on various different door types
  • Test data available (see above 'DATASHEETS' tab)
  • NOT suitable for 'Hollow Core' doors or MDF

Pack Contents

  • 4m² Pack = 1L Envirograf HWAP/WB Primer + 1L Envirograf HW01 White Intumescent Coating + 1L Envirograf HW04/S Undercoat
  • 10m² Pack = 1L Envirograf HWAP/WB Primer + 2.5L Envirograf HW01 White Intumescent Coating + 1L Envirograf HW04/S Undercoat
  • 20m² Pack = 2L Envirograf HWAP/WB Primer + 5L Envirograf HW01 White Intumescent Coating + 2L Envirograf HW04/S Undercoat

In good drying conditions (20°C/50% r.h.) we expect the following overcoat times;

  • Envirograf HWAP/WB Primer - After 1 hour
  • Envirograf HW01 White Intumescent Coating - After 2 hours
  • Envirograf HW04/S Undercoat - After 24 hours

Please Note: These products should not be used without reading and fully understanding the Door Upgrading Technical Data referenced above as incorrect application/specification may result in doors not being properly protected. We also recommend referring this information (including test data, product data sheets, etc.) to your authority for approval prior to purchase and application.

Send us your question

Question

In order to apply the fire retardant coating does the previous layer of paint on the door need to be removed or can the existing door be painted over by your product followed by new paint? thanks for letting me know Kind regards Esther

Esther Grossmann from London (UK) - 24/04/17

Answer

No any existing paint does not need to be removed as long as it is sound, well adhering and not fire retardant. The substrate surface must be clean of all dust and dry. There should be no trace of oil, grease or similar substance. The surface should be sanded smooth. If timber is previously painted, ensure the surface is clean and sanded appropriately to provide adequate key.

I have been asked to paint 16 previously painted fire doors on one side (hall side). Which paint system should I use and how much do I need. There is no info on regulations etc

Dawn Bkake from Manchester (Uk) - 01/03/17

To protect 16 door sides to 30min fire resistance you would require 4 of our Fire Door Paint (30min) packs. Download our 'Fire Door Systems Brochure' from the 'DATASHEETS' tab on the product page to check your doors are suitable and seek approval from your authority for this system prior to purchase and application.

Finally, you may want to check with your authority which side of your doors need protecting with our product as usually the 'risk' side would be the room side of each door, NOT the 'hall side'.

I'm interested in your door upgrade pack and note that the sealer coat can be over painted with a solvent based normal paint. We will be using a water based paint for the woodwork. Would you advise leaving the door with the sealer coat as the finish layer. (All subject to BC approval). Thanks

Richard lilley from Newcastle (Uk) - 03/02/17

The Fire Door Paint (30min) system is completed by the application of a white undercoat (included in the pack). This MUST be over painted and cannot be left as a finish. Conventional, single pack, decorative Water or Solvent based paints are acceptable to overcoat the undercoat to provide the colour and finish you require.

One of our clients has considered using intumescent paint to upgrade ordinary office doors and the painter has told them they "only need doing on one side". Reading your guidance confirms that you recommend painting the "risk side" by which I presume you mean the side the fire is likely to be on? However for doors opening onto a stairwell either side could have a fire and therefore both sides should be treated with intumescent paint. Could you confirm this? As a principle though upgrading the doors is a good idea so subject to your confirmation of the instructions I would probably recommend to them to proceed.

Mark Howard from Bristol (England) - 08/11/16

One of the advantages of our Fire Door Paint (30min) and Fire Door Varnish (30min) systems is that where deemed appropriate by the authority it can only be applied to the risk side of the door and still certified. That said, we do state in our product information (Fire Door Systems Brochure) that the user should seek guidance from their respective authority to ascertain which doors need to be protected in their property and on which sides. If you have deemed that your clients doors require protection on both sides then both sides should have the Fire Door Paint (30min ) system applied to them including any architraves, frames, etc. where required. This is why we sell the product by door sides rather than doors as a 4 door pack could upgrade 4 doors if only one side requires protection or 2 doors if both sides require protection. I trust this clears things up, should you have any further questions please do not hesitate to contact our Technical Team on 0113 2455450.

How long does this paint last? Does a door that has been treated have to be repainted every few years? How long can the paint be stored for once it has been opened?

Helen Ward from Oxford (UK) - 13/09/16

Once our Fire Door Paint (30min) has been used on the door(s) then it will last as long as the substrate. We recommend a re-application of a topcoat every 5-7 years just to ensure no damage occurs to the intumescent system underneath. Any damages to the door should be repaired immediately with the full system to the affected area. Once the tins have been opened the shelf life reduces to 3 months.

Question about the product

I have read and agree to the Conditions of Use (read) Send

The question has been correctly sent

Free delivery on orders over £75 (terms & conditions)

• Deliveries will be made within 3 working days (standard delivery)
• You must be UK mainland based for the free delivery offer.
• Postcodes listed are excluded from the free delivery and priced below.

Please note: deliveries will need to be signed for at the point of delivery.

UK Mainland OnlyUp to £75.00£75.01 +
Standard (2/3 working days)£8.00FREE
Next Day£15.00£15.00
Next day before 09:00am£30.00£30.00
Next day before 10:30am£25.00£25.00
Next day before 12:00pm£20.00£20.00
Saturday Delivery£35.00£35.00














£25 (Standard 2-3 Day Delivery Only)

AB30, AB31, AB32, AB33, AB34, AB35, AB36, AB37, AB38, AB44, AB45, AB46, AB47, AB48, AB49, AB50, AB51, AB52, AB53, AB54, AB55, AB56, FK, G83, IV, KW1, KW2, KW3, KW4, KW5, KW6, KW7, KW8, KW9, KW10, KW11, KW12, KW13, KW14, PA, PH, HS, KA27, KA28, ZE

£35 (Standard 2-3 Day Delivery Only)

BT, IM

£50 (Standard 2-3 Day Delivery Only)

JE, GY

Please note that all carriage prices are quoted without V.A.T. at the current rate.

Scottish Islands - outside standard distribution area, please contact us for a quote.

There may be an exception for heavy goods when purchased in quantity where we will contact you to advise any additional charges.

Next Day delivery and Saturday Service is available on stocked items for orders received before 11:00am only.

Because of the nature of our products, we use specially selected carriers to ensure safe and prompt delivery to you.

Please note: Any time or date named by Rawlins Paints Limited for delivery is given and intended as an estimate only and Rawlins Paints Limited shall not be liable to make good any damage or loss whether arising directly or indirectly out of a delay in delivery. Deliveries are made using a reliable nationwide carrier. Although over 99% of consignments arrive on time, we recommend that no labour is employed to undertake work until materials have arrived on site.

Envirograf HWAP Primer TDS

Download

Envirograf HWAP Primer MSDS

Download

Envirograf HWAP Primer Application Guide

Download

Envirograf HW01/F TDS

Download

Envirograf HW01/F MSDS

Download

Envirograf HW01/F Application Guide

Download

Envirograf HW04/S Undercoat TDS

Download

Envirograf HW04/S Undercoat MSDS

Download

Envirograf HW04/S Undercoat Application Guide

Download

Door Upgrading Technical Data

Download

2017-Efectis-R000741 Test Report

Download
IMPORTANT
Whilst every effort is made to ensure our data sheets are up to date, we advise you check the latest revision directly with the manufacturer to ensure you have the most current version.
E J Rawlins & Co. Ltd trading as Rawlins Paints make available product data sheets and information in good faith but without warranty. We do not accept liability for any errors or omissions contained within the data sheets or any outdated versions.