Thermoguard Timbercoat 30 & 60 Minute System is a coloured intumescent paint system for interior and exterior timber surfaces. Each pack contains the correct amount of basecoat (Timbercoat) and topcoat (Smoke & Flame Retardant Dualcoat) to ensure protection is achieved inline with the manufacturers recommendations to the respective area in question.Read Full Description
£128.00 + VAT
This product is not sold individually. You must select at least 1 quantity for this product.
Warning: Last items in stock!
Thermoguard Timbercoat 30 & 60 Minute System is a coloured intumescent paint system for interior and exterior timber surfaces. These packs has been created to help users ensure they are purchasing sufficient product for their project. Each pack contains the correct amount of basecoat (Timbercoat) and topcoat (Smoke & Flame Retardant Dualcoat) to ensure protection is achieved inline with the manufacturers recommendations to the respective area in question.
Please note: A written specification should be obtained from our Technical Department for your project prior to use to ensure this system will be suitable. Contact us by phone on 0113 2455450 or email [email protected]
To achieve 30* & 60mins + EN Class B s1 d0 and BS Class 1/0 timber board must be a minimum of 10mm+ thick for 30min protection and 20mm+ for 60min protection.
Followed by either;
IMPORTANT - The below information from the manufacturer must be read and referred to your relevant authority for approval BEFORE purchase and use.
Half Hour and 1 Hour Resistance To Wood
In line with good common practice, we recommend that approval be sought for the use of our system, outlining our justification for the issuing of the Fire Certificate prior to the product’s use.
Authorities generally accept our Fire Test evidence (copies available upon request) as justification for the provision of One Hour Fire Resistance in cases such as this for up to 1 Hour Fire Resistance, depending upon the thickness of board in question.
We hold independent Fire Tests for Thermoguard Timbercoat to provide One Hour Fire Resistance to a mock-up of a ceiling comprising softwood timber boards on softwood joists, with the boards abutting one another and joined by metal tongues set into the abutting edges of the boards. Whilst the amount of residual undamaged timber was clearly adequate to have withstood office or accommodation design loads, the floor tested in the Fire Test did not have weight imparted to it, as we sought data to work from the test for sites with greatly differing make-ups.
The floor tested achieved One Hour Fire Resistance to BS 476 Part 22, with approximately 7mm of timber joist and board surfaces destroyed to charring during the test. Charring was greater up the open joints between floorboards, reaching 12mm, as one would expect being merely butt-jointed rather than tongue and groove jointed. Provided the calculated residual structure is adequate, we also issue Certification to BS 476 Part 21 to 30 or 60min Fire Resistance. The normal char factor of unprotected softwood for 60 minutes is approx 50mm, thus additional Fire Resistance provided by our Intumescent Paint was approximately 30 minutes.
A Fire Resistance test for 30mins was carried out at Warrington Fire Research Centre in January 2016 to 25mm softwood and 25mm MDF. Uncoated boards burnt through completely during the test.
Thermoguard Timbercoat was filmed by Chanel 5 for documentary “Megastructures – Building from Distaster” which recorded 20 in simultaneous parallel test to 18mm softwood that at 6mins uncoated board burnt through, while boards protected with Timbercoat @ 600 microns / 7m² per 5kg lost only 3mm to char at 45mins, with the protected board retaining insulation so that it was safe to put a hand on the reverse face while the burner continued on the front face.
*Applications to achieve 30 minute protection can in certain instances achieve a 'reduced' specification if timber is significantly thicker than 10mm as follows;
|Timber Thickness||Specification||Increased 7m² Pack Coverage||Increased 21m² Pack Coverage|
|15mm+||Apply 2 coats of Timbercoat @ 3.2m² per kg/per coat||8m²||24m²|
|18mm+||Apply 2 coats of Timbercoat @ 3.6m² per kg/per coat||9m²||27m²|
|22mm+||Apply 2 coats of Timbercoat @ 4m² per kg/per coat||10m²||30m²|
Be the first to ask a question about this product!
Free delivery on orders over £75 (terms & conditions)
• Deliveries will be made within 3 working days (standard delivery)
• You must be UK mainland based for the free delivery offer.
• Postcodes listed are excluded from the free delivery and priced below.
Please note: deliveries will need to be signed for at the point of delivery.
|UK Mainland Only||Up to £75.00||£75.01 +|
|Standard (2/3 working days)||£8.00||FREE|
|Next day before 09:00am||£30.00||£30.00|
|Next day before 10:30am||£25.00||£25.00|
|Next day before 12:00pm||£20.00||£20.00|
£25 (Standard 2-3 Day Delivery Only)
AB30, AB31, AB32, AB33, AB34, AB35, AB36, AB37, AB38, AB44, AB45, AB46, AB47, AB48, AB49, AB50, AB51, AB52, AB53, AB54, AB55, AB56, FK, G83, IV, KW1, KW2, KW3, KW4, KW5, KW6, KW7, KW8, KW9, KW10, KW11, KW12, KW13, KW14, PA, PH, HS, KA27, KA28, ZE
£35 (Standard 2-3 Day Delivery Only)
£50 (Standard 2-3 Day Delivery Only)
Please note that all carriage prices are quoted without V.A.T. at the current rate.
Scottish Islands - outside standard distribution area, please contact us for a quote.
There may be an exception for heavy goods when purchased in quantity where we will contact you to advise any additional charges.
Next Day delivery and Saturday Service is available on stocked items for orders received before 11:00am only.
Because of the nature of our products, we use specially selected carriers to ensure safe and prompt delivery to you.
Please note: Any time or date named by Rawlins Paints Limited for delivery is given and intended as an estimate only and Rawlins Paints Limited shall not be liable to make good any damage or loss whether arising directly or indirectly out of a delay in delivery. Deliveries are made using a reliable nationwide carrier. Although over 99% of consignments arrive on time, we recommend that no labour is employed to undertake work until materials have arrived on site.