Thermoguard Wallcoat 30 & 60 Minute System is a coloured intumescent paint system for interior plasterboard ceiling and wall surfaces. Each pack contains the correct amount of basecoat (Wallcoat) and topcoat (Wallcoat Smoke & Flame Retardant Topcoat) to ensure protection is achieved inline with the manufacturers recommendations to the respective area in question.Read Full Description
£128.00 + VAT
This product is not sold individually. You must select at least 1 quantity for this product.
Warning: Last items in stock!
Thermoguard Wallcoat 30 & 60 Minute System is a coloured intumescent paint system for interior plasterboard ceiling and wall surfaces. These packs have been created to help users ensure they are purchasing sufficient product for their project. Each pack contains the correct amount of basecoat (Wallcoat) and topcoat (Wallcoat Smoke & Flame Retardant Topcoat) to ensure protection is achieved inline with the manufacturers recommendations to the respective area in question.
Each component of the packs can still be purchased individually if required here: Thermoguard Wallcoat and here: Thermoguard Wallcoat Smoke & Flame Retardant Topcoat
Please note: A written specification should be obtained from our Technical Department for your project prior to use to ensure this system will be suitable. Contact us by phone on 0113 2455450 or email [email protected]
System (Interior Use Only)
To achieve 30 & 60mins + BS EN Class B s1 d0 and Class 0 (Plasterboard must be a minimum of 9.5mm+ thick for 30min protection and 12.5mm+ for 60min protection).
IMPORTANT - The below information from the manufacturer must be read and referred to your relevant authority for approval BEFORE purchase and use.
We issue a Fire Certificate for 60mins to 12.5mm fire rated plasterboard or 30mins to 9mm plasterboard, cement or similar based board under-drawing 22mm+ T&G flooring.
Wallcoat Intumescent Paint added minimum 30mins Fire Resistance to 10mm and 12.5mm cementitious board and to 12.5mm plasterboard in a 90min indicative UKAS Fire Test Laboratory.
In all cases a 25mm MDF was located 70mm behind the cement of plasterboards. Temperatures were monitored on the protected face (facing away from the furnace) of the MDF, and char damage to the side of MDF facing the plasterboard or cement board was measured following the 90min Fire Test. Char damage was 10>12mm, indicating unprotected exposure to fire of 15>20mins during the 90min period. Insulation was maintained for 60mins.
The TV documentary Megastructures "Building from Disaster" demonstrated a 45min. max. severity burn test on 25mm softwood panels, with our Wallcoat/Timbercoat intumescent painted, normal painted and unpainted panels. The last two burnt completely through within 6mins, whereas the panel protected with Wallcoat/Timbercoat had lost only 1-2mm to charring and maintained full insulation. A copy of the footage is available upon request.
The plasterboard must be sound and any paint must be firmly adhered**.
Hard or smooth paints must be thoroughly abraded to provide a key
Ensure surfaces are dry & free from contamination.
**Consult the Technical Department for advice on adhesion tests.
Fire Certificate issued upon completion FOC.
We also issue a 120min Fire Certificate to upgrade 90min fire–rated concrete, 90mins for 60min Fire-Rated concrete and 60mins to 30min concrete using this specification, based on the evidence above.
Be the first to ask a question about this product!
Free delivery on orders over £75 (terms & conditions)
• Deliveries will be made within 3 working days (standard delivery)
• You must be UK mainland based for the free delivery offer.
• Postcodes listed are excluded from the free delivery and priced below.
Please note: deliveries will need to be signed for at the point of delivery.
|UK Mainland Only||Up to £75.00||£75.01 +|
|Standard (2/3 working days)||£8.00||FREE|
|Next day before 09:00am||£30.00||£30.00|
|Next day before 10:30am||£25.00||£25.00|
|Next day before 12:00pm||£20.00||£20.00|
£25 (Standard 2-3 Day Delivery Only)
AB30, AB31, AB32, AB33, AB34, AB35, AB36, AB37, AB38, AB44, AB45, AB46, AB47, AB48, AB49, AB50, AB51, AB52, AB53, AB54, AB55, AB56, FK, G83, IV, KW1, KW2, KW3, KW4, KW5, KW6, KW7, KW8, KW9, KW10, KW11, KW12, KW13, KW14, PA, PH, HS, KA27, KA28, ZE
£35 (Standard 2-3 Day Delivery Only)
£50 (Standard 2-3 Day Delivery Only)
Please note that all carriage prices are quoted without V.A.T. at the current rate.
Scottish Islands - outside standard distribution area, please contact us for a quote.
There may be an exception for heavy goods when purchased in quantity where we will contact you to advise any additional charges.
Next Day delivery and Saturday Service is available on stocked items for orders received before 11:00am only.
Because of the nature of our products, we use specially selected carriers to ensure safe and prompt delivery to you.
Please note: Any time or date named by Rawlins Paints Limited for delivery is given and intended as an estimate only and Rawlins Paints Limited shall not be liable to make good any damage or loss whether arising directly or indirectly out of a delay in delivery. Deliveries are made using a reliable nationwide carrier. Although over 99% of consignments arrive on time, we recommend that no labour is employed to undertake work until materials have arrived on site.