"

Thermoguard Fire Varnish 30 & 60 Minute System

Thermoguard Fire Varnish 30 & 60min System Pack View larger
ApplicationBrush, Roller, Spray
The figures stated above are approximate. Please ensure you refer to all datasheets for full application information.

Thermoguard Fire Varnish 30 & 60 Minute System is a clear intumescent varnish for interior and exterior timber surfaces. Each pack contains the correct amount of basecoat (Fire Varnish Basecoat) and topcoat (Fire Varnish Overcoat (Interior) / (Exterior)) to ensure protection is achieved inline with the manufacturers recommendations to the respective area in question.

Read Full Description

More details

£350.00 + VAT

Thermoguard Fire Varnish 30 & 60 Minute System is a clear intumescent varnish for interior and exterior timber surfaces. These packs have been created to help users ensure they are purchasing sufficient product for their project. Each pack contains the correct amount of basecoat (Fire Varnish Basecoat) and topcoat ( Fire Varnish Overcoat (Interior) / Fire Varnish Overcoat (Exterior)) to ensure protection is achieved inline with the manufacturers recommendations to the respective area in question.

Each component of the packs can still be purchased individually if required here: Thermoguard Fire Varnish Basecoat and here: Thermoguard Fire Varnish Overcoat (Interior) / Thermoguard Fire Varnish Overcoat (Exterior)

Please note: A written specification should be obtained from our Technical Department for your project prior to use to ensure this system will be suitable. Contact us by phone on 0113 2455450 or email [email protected]

For fire protection to doors, see Fire Door Upgrade Kits

For BS Class 1/0 & EN Class B only see Thermoguard Fire Varnish BS Class 1/0 & EN Class B System

Pack Contents

  • 7m² Pack (Int/Ext. Spec.) = 1 x 20m² Fire Varnish Basecoat + 1 x 20m² Fire Varnish Overcoat (Exterior)
  • 21m² Pack (Interior Spec.) = 3 x 20m² Fire Varnish Basecoat + 1 x 20m² Fire Varnish Overcoat (Interior)
  • 21m² Pack (Exterior Spec.) = 3 x 20m² Fire Varnish Basecoat + 1 x 40m² Fire Varnish Overcoat (Exterior)

System

  • Apply 3 coats of Thermoguard Fire Varnish Basecoat @ 20m² per 20m² pack/per coat

Followed by either;

  • Internal Applications: 1 coat of Thermoguard Fire Varnish Overcoat (Interior) Matt, Satin or Gloss
  • External, Damp or High Wear Applications: 2 coats Thermoguard Fire Varnish Overcoat (Exterior) Matt, Satin or Gloss

To achieve 30 & 60mins + EN Class B s2 d0 and BS Class 1/0 minimum thicknesses apply of which approval must be sought before purchase.


IMPORTANT - The below information from the manufacturer must be read and referred to your relevant authority for approval BEFORE purchase and use.

We have an indicative 30min Fire Test at a UKAS Fire Test Laboratory demonstrated 10mm loss to charring on plywood & MDF.

Our Fire Varnish BS EN Class B Test indicates that softwood did not burn significantly for the 20mins test duration and our previous Class O Part 6 Fire Propagation test indicates that protected softwood did not burn within the 10 minutes test duration.

Further in-house testing indicated that when applied at three times the Class B & Class O specification Fire Varnish intumescent added a total of 20 minutes Fire Resistance.

We assess projects requiring 30 or 60mins Fire Resistance on an individual basis, referring to the TRADA Char Rate Tables and calculated residual timber to ascertain whether we could issue a Fire Certificate for the project.

In order to enable us to issue a 30 minutes Fire Certificate in the case of softwood the surface must be able to afford the loss of 8mm depth from all surfaces exposed to a fire. For 60 minutes we assess based on 30mm loss during the fire.

For oak or similar woods the loss to take into account is 5mm for 30mins and 17mm for 60mins.

In other words, the residual timber should be adequate to in the case of:

  1. Underside of a floor to support the anticipated weight load on the floor.
  2. A timber ceiling under-drawing a floor and joists can be treated as sacrificial but should have protected the area above to 30mins
  3. A timber wall should still be able to support itself without the fire passing through to the area the other side.

Send us your question

Be the first to ask a question about this product!

Question about the product

I have read and agree to the Conditions of Use (read) Send

The question has been correctly sent

Free delivery on orders over £75 (terms & conditions)

• Deliveries will be made within 3 working days (standard delivery)
• You must be UK mainland based for the free delivery offer.
• Postcodes listed are excluded from the free delivery and priced below.

Please note: deliveries will need to be signed for at the point of delivery.

UK Mainland OnlyUp to £75.00£75.01 +
Standard (2/3 working days)£8.00FREE
Next Day£15.00£15.00
Next day before 09:00am£30.00£30.00
Next day before 10:30am£25.00£25.00
Next day before 12:00pm£20.00£20.00
Saturday Delivery£35.00£35.00














£25 (Standard 2-3 Day Delivery Only)

AB30, AB31, AB32, AB33, AB34, AB35, AB36, AB37, AB38, AB44, AB45, AB46, AB47, AB48, AB49, AB50, AB51, AB52, AB53, AB54, AB55, AB56, FK, G83, IV, KW1, KW2, KW3, KW4, KW5, KW6, KW7, KW8, KW9, KW10, KW11, KW12, KW13, KW14, PA, PH, HS, KA27, KA28, ZE

£35 (Standard 2-3 Day Delivery Only)

BT, IM

£50 (Standard 2-3 Day Delivery Only)

JE, GY

Please note that all carriage prices are quoted without V.A.T. at the current rate.

Scottish Islands - outside standard distribution area, please contact us for a quote.

There may be an exception for heavy goods when purchased in quantity where we will contact you to advise any additional charges.

Next Day delivery and Saturday Service is available on stocked items for orders received before 11:00am only.

Because of the nature of our products, we use specially selected carriers to ensure safe and prompt delivery to you.

Please note: Any time or date named by Rawlins Paints Limited for delivery is given and intended as an estimate only and Rawlins Paints Limited shall not be liable to make good any damage or loss whether arising directly or indirectly out of a delay in delivery. Deliveries are made using a reliable nationwide carrier. Although over 99% of consignments arrive on time, we recommend that no labour is employed to undertake work until materials have arrived on site.

Fire Varnish System TDS

Download

Fire Varnish Basecoat Base MSDS

Download

Fire Varnish Basecoat Activator MSDS

Download

Fire Varnish Overcoat (Interior) Matt MSDS

Download

Fire Varnish Overcoat (Interior) Satin MSDS

Download

Fire Varnish Overcoat (Interior) Gloss MSDS

Download

Fire Varnish Overcoat (Exterior) Matt MSDS

Download

Fire Varnish Overcoat (Exterior) Satin MSDS

Download

Fire Varnish Overcoat (Exterior) Gloss MSDS

Download

Thermoguard Woodstain Colours

Download
IMPORTANT
Whilst every effort is made to ensure our data sheets are up to date, we advise you check the latest revision directly with the manufacturer to ensure you have the most current version.
E J Rawlins & Co. Ltd trading as Rawlins Paints make available product data sheets and information in good faith but without warranty. We do not accept liability for any errors or omissions contained within the data sheets or any outdated versions.