"

Thermoguard Asbestos Encapsulating Coating

Thermoguard Asbestos Encapsulating Coating View larger
Typical Coverage (per coat)5m² per litre
Touch Dry4 Hours
ApplicationBrush, Roller, Spray
The figures stated above are approximate. Please ensure you refer to all datasheets for full application information.

Thermoguard Asbestos Encapsulating Coating is used to seal and encapsulate asbestos surfaces to effectively prevent the release of asbestos and other fibres into the atmosphere. Based upon a unique adhesive-grade resin, highly plasticised for outstanding flexibility to withstand normal movement within a building and to the components within a building and incorporating flame retardant additives.

Read Full Description

More details

£66.00 + VAT

Thermoguard Asbestos Encapsulating Coating is a white sealer coating based upon a unique adhesive-grade resin, highly plasticised for outstanding flexibility to withstand normal movement within a building and to the components within a building and incorporating flame retardant additives. Thermoguard Asbestos Encapsulating Coating is water based, solvent free, low odour and easy and safe to use.

Thermoguard Asbestos Encapsulating Coating seals rigid asbestos within buildings which is sound, firmly adhering and not subject to mechanical damage, in particular rigid asbestos in locations which are concealed and difficult to access, such as service ducts, roof and ceiling voids, etc. Also used to seal in difficult to remove, firmly bonded asbestos and loose isolated fibres remaining after primary rigid asbestos removal has taken place.

Thermoguard Asbestos Encapsulating Coating effectively prevents the release of asbestos and other fibres into the atmosphere by encapsulating them. Permanently bonds residual asbestos fibres, after primary removal, to the surface which they are attached or upon which they lay.

Helps prevent surface spread of flame on non-combustable surfaces and can be used in conjunction with Thermoguard Timbercoat or Wallcoat Intumescent Paint to upgrade combustible surfaces to Class 1 and Class 0.

Suitable for internal and external use but not on external roof (flat or pitched) roof surfaces.

Send us your question

Question

Can you use this on top of glasbesto cladding which is in sound condition will this paint Stick to the glasbesto cladding without rubbing down we are only allowed to clean surface with a water-based degreaser .

Ian lee from Gloucester (Uk) - 02/08/17

Answer

We are not familiar with 'Glasbesto', but if it is similar to rigid asbestos sheets - a dull granular surface - and does not contain wax or silicones, Thermoguard Asbestos Encapsulating Coating will bond extremely well without abrasion. 

Bond and every other characteristic are far better than vinyl emulsion, so a test patch to see if vinyl emulsion bonds will indicate if Thermoguard Asbestos Encapsulating Coating will bond well. 

Suitable for internal or external use but NOT on tops of roofs. 

Could you please advise me who makes this product?Also, I need to coat a big area of asbestos soffit boards, which have already been painted. Can this be applied directly to the painted area, without the need to scrape any loose paint off? The soffit boards are made of a low grade of asbestos cement.Kind regards Chris

Chris Wilson from Seghill (United Kingdom) - 12/07/17

The manufacturer of the Asbestos Encapsulating Coating is Thermoguard. The coating can be applied over previously painted substrates but if the existing paint is glossy then you would need to create a key before application. If there are any areas of loose or flaking existing coating then these would need to be removed but care must be taken when doing so as you are working with asbestos. The coating can be used internally and externally with the only exception that it can’t be used on a roof.

Question about the product

I have read and agree to the Conditions of Use (read) Send

The question has been correctly sent

Free delivery on orders over £75 (terms & conditions)

• Deliveries will be made within 3 working days (standard delivery)
• You must be UK mainland based for the free delivery offer.
• Postcodes listed are excluded from the free delivery and priced below.

Please note: deliveries will need to be signed for at the point of delivery.

UK Mainland OnlyUp to £75.00£75.01 +
Standard (2/3 working days)£8.00FREE
Next Day£15.00£15.00
Next day before 09:00am£30.00£30.00
Next day before 10:30am£25.00£25.00
Next day before 12:00pm£20.00£20.00
Saturday Delivery£35.00£35.00














£25 (Standard 2-3 Day Delivery Only)

AB30, AB31, AB32, AB33, AB34, AB35, AB36, AB37, AB38, AB44, AB45, AB46, AB47, AB48, AB49, AB50, AB51, AB52, AB53, AB54, AB55, AB56, FK, G83, IV, KW1, KW2, KW3, KW4, KW5, KW6, KW7, KW8, KW9, KW10, KW11, KW12, KW13, KW14, PA, PH, HS, KA27, KA28, ZE

£35 (Standard 2-3 Day Delivery Only)

BT, IM

£50 (Standard 2-3 Day Delivery Only)

JE, GY

Please note that all carriage prices are quoted without V.A.T. at the current rate.

Scottish Islands - outside standard distribution area, please contact us for a quote.

There may be an exception for heavy goods when purchased in quantity where we will contact you to advise any additional charges.

Next Day delivery and Saturday Service is available on stocked items for orders received before 11:00am only.

Because of the nature of our products, we use specially selected carriers to ensure safe and prompt delivery to you.

Please note: Any time or date named by Rawlins Paints Limited for delivery is given and intended as an estimate only and Rawlins Paints Limited shall not be liable to make good any damage or loss whether arising directly or indirectly out of a delay in delivery. Deliveries are made using a reliable nationwide carrier. Although over 99% of consignments arrive on time, we recommend that no labour is employed to undertake work until materials have arrived on site.

Asbestos Coating TDS

Download

Asbestos Coating MSDS

Download
IMPORTANT
Whilst every effort is made to ensure our data sheets are up to date, we advise you check the latest revision directly with the manufacturer to ensure you have the most current version.
E J Rawlins & Co. Ltd trading as Rawlins Paints make available product data sheets and information in good faith but without warranty. We do not accept liability for any errors or omissions contained within the data sheets or any outdated versions.