"

Zeroflame Aquasteel WB+ Finish

Zeroflame Aquasteel WB+ Finish View larger
Typical Coverage (per coat)12m² per litre
Touch Dry4 hours
ApplicationBrush, Roller, Spray
The figures stated above are approximate. Please ensure you refer to all datasheets for full application information.

Zeroflame Aquasteel WB+ Finish is an exceptionally hard wearing decorative finish for application over Zeroflame Aquasteel WB+ Intumescent Coating and as a Class 0 fire rated finish on bare or previously painted non-combustible surfaces.

Read Full Description

More details

£53.54 + VAT

Zeroflame Aquasteeel WB+ Finish is an exceptionally hard wearing decorative finish for application over Zeroflame Aquasteel WB+ Intumescent Coating and as a Class 0 fire rated finish on bare or previously painted non-combustible surfaces. Zeroflame Aquasteel WB+ Finish is available as a water based acrylic eggshell or solvent based gloss finish. Both Eggshell and Gloss finishes are available in nearly all BS, RAL and NCS colours.

Apply at a rate of 12m² per litre/per coat over Zeroflame Aquasteel WB+ Intumescent Coating, one coat is normally sufficient but for dark contrasting colours two may be required.

Features and Benefits

  • Easily applied by brush, roller or spray
  • Hard wearing, eggshell or gloss finish
  • High coverage and wide colour range

Send us your question

Question

We are currently converting our garage and do not want plasterboard walls! the building office says if we use panelling it must be class 1 spread of flame. We would like to use mdf 9mm wall panelling sheets so what paint would you recommend to make them conform?

barbara lees from callington (cornwall) - 23/01/17

Is Zeroflame Aquasteel WB+ Finish suitable to paint over the render of a chimney hearth?

aubert from london (UK) - 13/12/15

No it isn't, we recommend using Thermoguard Wallcoat Smoke & Flame Retardant Topcoat. This product isn't heat resistant and may discolour over time if continually subjected to high temperatures, but it is a much safer alternative to standard emulsion.

Hi there, I was wondering if you can match Zeroflame Aquasteel WB+ Finish to any RAL or Pantone colour? Two colours I'm interested in are RAL 10A01 and Pantone warm gray u.

Oliver Dew from Solihull (England) - 29/06/15

We can mix Zeroflame Aquasteel WB+ Finish to most RAL, BS and NCS colours. We cannot produce Pantone colours but can offer the 10A01 you have asked for, this is actually in the BS 4800 colour range not RAL and is available to select as a standard colour from the options listed on the product on our website.

Question about the product

I have read and agree to the Conditions of Use (read) Send

The question has been correctly sent

Free delivery on orders over £75 (terms & conditions)

• Deliveries will be made within 3 working days (standard delivery)
• You must be UK mainland based for the free delivery offer.
• Postcodes listed are excluded from the free delivery and priced below.

Please note: deliveries will need to be signed for at the point of delivery.

UK Mainland OnlyUp to £75.00£75.01 +
Standard (2/3 working days)£8.00FREE
Next Day£15.00£15.00
Next day before 09:00am£30.00£30.00
Next day before 10:30am£25.00£25.00
Next day before 12:00pm£20.00£20.00
Saturday Delivery£35.00£35.00














£25 (Standard 2-3 Day Delivery Only)

AB30, AB31, AB32, AB33, AB34, AB35, AB36, AB37, AB38, AB44, AB45, AB46, AB47, AB48, AB49, AB50, AB51, AB52, AB53, AB54, AB55, AB56, FK, G83, IV, KW1, KW2, KW3, KW4, KW5, KW6, KW7, KW8, KW9, KW10, KW11, KW12, KW13, KW14, PA, PH, HS, KA27, KA28, ZE

£35 (Standard 2-3 Day Delivery Only)

BT, IM

£50 (Standard 2-3 Day Delivery Only)

JE, GY

Please note that all carriage prices are quoted without V.A.T. at the current rate.

Scottish Islands - outside standard distribution area, please contact us for a quote.

There may be an exception for heavy goods when purchased in quantity where we will contact you to advise any additional charges.

Next Day delivery and Saturday Service is available on stocked items for orders received before 11:00am only.

Because of the nature of our products, we use specially selected carriers to ensure safe and prompt delivery to you.

Please note: Any time or date named by Rawlins Paints Limited for delivery is given and intended as an estimate only and Rawlins Paints Limited shall not be liable to make good any damage or loss whether arising directly or indirectly out of a delay in delivery. Deliveries are made using a reliable nationwide carrier. Although over 99% of consignments arrive on time, we recommend that no labour is employed to undertake work until materials have arrived on site.

Aquasteel WB+ Finish (Gloss) TDS

Download

Aquasteel WB+ Finish (Gloss) MSDS

Download

Aquasteel WB+ Finish (Eggshell) TDS

Download

Aquasteel WB+ Finish (Eggshell) MSDS

Download
IMPORTANT
Whilst every effort is made to ensure our data sheets are up to date, we advise you check the latest revision directly with the manufacturer to ensure you have the most current version.
E J Rawlins & Co. Ltd trading as Rawlins Paints make available product data sheets and information in good faith but without warranty. We do not accept liability for any errors or omissions contained within the data sheets or any outdated versions.