"

Bollom Brosteel Ultra 60

Brosteel Ultra 60 View larger
Typical Coverage (per coat)See Data Sheet
Touch Dry30-60 Mins
ApplicationBrush, Roller, Spray
The figures stated above are approximate. Please ensure you refer to all datasheets for full application information.

Brosteel Ultra 60, from Bollom, is a revolutionary new thin-film waterborne intumescent paint (click here for others) designed to provide 30 and 60 minutes fire resistance on standard structural steel members. Its water-based formulation is quick drying and does not require any specialist application skills - it can be applied by brush, roller or airless spray straight from the can.

Read Full Description

More details

£51.98 + VAT

Brosteel Ultra 60 - White Intumescent Paint

Once a steel surface has been primed with an anti-corrosive primer, Brosteel Ultra can be applied. This quick drying, matt white, thin-film intumescent coating is a hugely popular fire resistant product for steel in the UK and provides 30 and 60 minutes of flame resistance. Full details of each coatings fire retardant properties can be found below.

Brosteel Ultra 60 can also be overcoated with its own range of Flameguard Ultra approved topcoats to provide a desired colour and finish. For use on internal and external steel structures where areas are prone to excessive heat build up or are prone to small fires breaking out, this is another Bollom intumescent paint product that is used primarily within the industrial trade sector, but can be found on smaller domestic builds.

The Basics

What you really need to know...

  • Protects steel from fire - 1 coat = 30 mins / 2 coats = 60 mins*
  • Not to be applied onto bare steel, no special primer is required, just a suitable anti-corrosion primer.
  • Leaves a matt white finish which can be left as a finish (if not remaining visible) or overcoated with one of the Flameguard Topcoats.
  • Certificate of Conformance and Installation is issued with every correctly applied purchase upon request.
  • Fully tested and approved to British Standards.
  • Can be applied with a roller, brush or spray gun.
  • Brosteel Ultra 60 works by expanding in a fire to create a protective char to the steel surface that will last for a minimum of 30 minutes or 60 minutes respectively.

Fire Protection Simplified

Brosteel Ultra 60 is designed to take the guesswork out of intumescent specification, the simplified formulation provides 30 minutes fire protection in only one coat - 60 minutes can be achieved in two coats.*

Certification & Approval

Brosteel Ultra 60 Intumescent Paint for Structural Steel has been fully fire tested BS476:Part 20/21:1987 ASFP Approved, and Installation and Conformance Certificates are supplied with every correctly applied purchase upon request.

Advantages

• Simplicity - Simplified specification and simple application procedures.
• Cost effective - Due to its easy-to-apply, water-based formulation
• Brosteel Ultra 60 does not require any specialist application skills and can be applied by brush, roller or airless spray by any competent contractor.
• Certified - Certificates of Conformance and Installation can be supplied with every purchase.
• Fully Tested - All of Bollom’s Intumescent Coatings for Structural Steel have been fully fire tested BS476:Part 20/21:1987 ASFP Approved.

*Amount of coats required may vary dependent upon the type of steel to be protected - please consult the Technical Department or Data Sheets for more information.

Send us your question

Question

We are in process of redesigning a restaurant in basement and want to keep the steel beams exposed. We need a 60 minute paint so is this product suitable for us to use and how could be obtain the certification.?

PRAVEEN KUMAR from Glasgow (United Kingdom) - 30/04/16

Answer

Bollom Brosteel Ultra 60 will provide 60 minute fire protection on most standard structural steel sections. It is important to check that your steel is suitable according to the information in the Brosteel Ultra 60 Brochure available to download from our 'DATASHEETS' tab on this product page. Alternatively you can contact our Technical Team and provide them with the dimensions of your steel sections and they can confirm whether they would be suitable and if so how much Brosteel you would require. You can request a Certificate of Conformance and Installation from ourselves to provide to your authority as proof of completion after applying the product.

Does Bollom Brosteel Ultra 60 have BBA or CE approval for protecting a steel frame in a residential new build.

Nigel Lamb from Tring (England) - 13/03/16

Neither, but it has succesfully been tested by Certifire who are an independent third party certification scheme that assures performance, quality, reliability and traceability of fire protection products. They are recognised by regulatory authorities worldwide, and is an internationally respected mark of fire safety and one of the most authoritative in the industry. I will forward you a copy of the Certificate now.

Will Bollom Brosteel Ultra 60 meet UK building regulations (Part B: Fire Safety) in the UK if we want to expose steel beams in our living room?

Rob Boteler from Brackley (UK) - 01/06/15

Bollom Brosteel Ultra 60 will provide 30 or 60 minute protection to structural steelwork. It is important that you check with your authority what level of fire protection is required for the steel on your project but usually for residential properties it will be 30 minute protection that is required. You can apply Bollom Brosteel Ultra 60 and then request a Certificate of Conformance and Installation from ourselves to provide to your authority as proof of completion.

Question about the product

I have read and agree to the Conditions of Use (read) Send

The question has been correctly sent

Free delivery on orders over £75 (terms & conditions)

• Deliveries will be made within 3 working days (standard delivery)
• You must be UK mainland based for the free delivery offer.
• Postcodes listed are excluded from the free delivery and priced below.

Please note: deliveries will need to be signed for at the point of delivery.

UK Mainland OnlyUp to £75.00£75.01 +
Standard (2/3 working days)£8.00FREE
Next Day£15.00£15.00
Next day before 09:00am£30.00£30.00
Next day before 10:30am£25.00£25.00
Next day before 12:00pm£20.00£20.00
Saturday Delivery£35.00£35.00














£25 (Standard 2-3 Day Delivery Only)

AB30, AB31, AB32, AB33, AB34, AB35, AB36, AB37, AB38, AB44, AB45, AB46, AB47, AB48, AB49, AB50, AB51, AB52, AB53, AB54, AB55, AB56, FK, G83, IV, KW1, KW2, KW3, KW4, KW5, KW6, KW7, KW8, KW9, KW10, KW11, KW12, KW13, KW14, PA, PH, HS, KA27, KA28, ZE

£35 (Standard 2-3 Day Delivery Only)

BT, IM

£50 (Standard 2-3 Day Delivery Only)

JE, GY

Please note that all carriage prices are quoted without V.A.T. at the current rate.

Scottish Islands - outside standard distribution area, please contact us for a quote.

There may be an exception for heavy goods when purchased in quantity where we will contact you to advise any additional charges.

Next Day delivery and Saturday Service is available on stocked items for orders received before 11:00am only.

Because of the nature of our products, we use specially selected carriers to ensure safe and prompt delivery to you.

Please note: Any time or date named by Rawlins Paints Limited for delivery is given and intended as an estimate only and Rawlins Paints Limited shall not be liable to make good any damage or loss whether arising directly or indirectly out of a delay in delivery. Deliveries are made using a reliable nationwide carrier. Although over 99% of consignments arrive on time, we recommend that no labour is employed to undertake work until materials have arrived on site.

Bollom Brosteel Ultra 60 TDS

Download

Bollom Brosteel Ultra 60 MSDS

Download

Bollom Brosteel Ultra 60 Brochure

Download