International Interchar 212 is independently fire tested. Recognised by FM Approvals as a Specification Tested Product in accordance with ASTM E119. Also tested in accordance with UL 263 (exterior listed), BS 476 Parts 20-22, GOST (Russia), ENV 13381 Pt 4, Australian Standard AS1530.4 (1997) and Korean Standard F 2257.

Typically applied off site by specialist applicators International Interchar 212 will achieve the required fire protection thickness in only one or two coats. The product has excellent corrosion performance and mechanical properties. International Interchar 212 can provide fully fire proofed steelwork without the need to topcoat. Primarily a spray applied material, and performs without the requirement for any reinforcement.

Intended Uses:

To assist in preserving the structural integrity of steelwork in a cellulosic fire. Typical structures requiring this protection include a number of public access buildings e.g Airport Terminals, Leisure Facilities, Convention Centres, Educational Facilities, Shopping Malls, Industrial Complexes, and Hotels.

International Interchar 212 utilises tough durable epoxy technology to provide a material that allows for steelwork to be fabricated and fire protected away from the construction site which helps in both improving quality control and reducing construction schedules.

Features & Benefits:

• Offers up to 3 hours fire protection
• Carries CE Marking
• 100% volume solids means extremely low VOCs which contributes to the structure's green rating
• Independently tested for explosion and impact resistance
• Approvals to a range of fire standards
• Tested for surface spread of flame, smoke development and toxicity levels
• Compatible with a range of topcoats and colours which allows maximum expression
• Excellent damage resistance makes for a robust off site alternative to on site application
• Applicator friendly: low odour, high build, rapid cure
• Hydrocarbon fire resistance (UL1709 Design XR627)
• Excellent resistance to water absorption

IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions and should be applied only by an individual with the necessary expertise and experience. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.