|Typical Coverage (per coat)||Supplied in pre-measured packs to apply 1 coat to 20m²|
|Touch Dry||18 Hours|
|Application||Brush, Roller, Spray|
Thermoguard Fire Varnish Basecoat is a clear intumescent varnish that is the first coat of a 2 coat system (3 coat externally) for the decorative Fire Protection of timber and timber derived substrates to Class 1, Class 0, EN Class B s2 d0. For 30 & 60 minutes Fire Resistance please contact our Technical Department (0113 2455450).Read Full Description
£99.00 + VAT
This product is not sold individually. You must select at least 1 quantity for this product.
Warning: Last items in stock!
Intended Use – Clear Fire Protection Basecoat for Fire Varnish System for Wood
Thermoguard Fire Varnish is a clear varnish system for the Fire Protection of timber and timber derived substrates to BS Class 1 and Class 0 Surface Spread of Flame as well as BS EN Class B s2 d0 (for 30 or 60 minutes Fire Resistance our Technical Department MUST be contacted prior to purchase on 0113 2455450). The special formula provides a tough, durable finish to internal and external wood. The clear finish enhances the natural beauty of the wood while providing protection against UV and wear as well as fire protecting new and previously varnished surfaces.
The Thermoguard Fire Varnish System is made up of Thermoguard Fire Varnish Basecoat (a two component product consisting of a base and activator mixed together before use - see image above) which is a clear, intumescent varnish to be finished with Thermoguard Fire Varnish Overcoat (Interior) available in a clear matt, satin or gloss finish, or Thermoguard Fire Varnish Overcoat (Exterior) available in a clear matt or satin finish. The Thermoguard Fire Varnish Overcoats provide protection against UV, weathering (Exterior Grade) and wear whilst Thermoguard Fire Varnish Basecoat provides the Fire Protection.
Intumescent Fire Protection
When exposed to fire, the Thermoguard Fire Varnish System expands to create an insulating barrier, protecting timber surfaces from flames, heat and oxygen and suppressing emission of deadly smoke & gasses.
Specification and Application
Prepare and apply – (INTERIOR)
Prepare and apply – (EXTERIOR, DAMP, HIGH WEAR AREAS or FRUITWOODS)
Available Pack Sizes
Applicators should also refer to instructions on product containers.
Previously Varnished and Stained Surfaces or Wood Preservers
The Thermoguard Fire Varnish System can be applied over firmly adhered standard clear varnish. For existing stained varnishes, stain coatings, old fire coatings or if in doubt, contact our Technical Department on 0113 2455450.
**Allow adequate time for stain or preservative fluids to escape before applying the Thermoguard Fire Varnish System.
Fire Test Standards and Certification
Note - For 30 or 60 mins Fire Resistance see Thermoguard Fire Varnish 30 & 60 Minute System.
For fire protection to doors, see Fire Door Upgrade Kits
We will issue a Certificate of Supply upon request for each correctly specified project for Insurance, Fire and Building Control Authority and Client Records against proof of purchase.
NEW Fire Regulations and Tests Explained
The new BS EN tests also monitor -
Hi Does the clear varnish product turn a mdf veneered board from no fire Protection to 30min protection?Is there a choice of satin or gloss finish too? Is the varnish fully clear or is lightly tinted?
Robert Harris from London (Uk) - 10/11/16
Thermoguard Fire Varnish Basecoat provides BS Class 1, Class 0, EN Class B s2 d0 protection to timber and timber derived substrates. It is a clear varnish (not lightly tinted) available in matt, satin or gloss finishes.
30min protection can be achieved using the Thermoguard Fire Varnish System but approval must first be sought from the governing authority on the project for information provided by our Technical Department. To receive a 30min specification and supporting documentation for submission, please contact our Technical Team on 0113 2455450 or [email protected]
Free delivery on orders over £75 (terms & conditions)
• Deliveries will be made within 3 working days (standard delivery)
• You must be UK mainland based for the free delivery offer.
• Postcodes listed are excluded from the free delivery and priced below.
Please note: deliveries will need to be signed for at the point of delivery.
|UK Mainland Only||Up to £75.00||£75.01 +|
|Standard (2/3 working days)||£8.00||FREE|
|Next day before 09:00am||£30.00||£30.00|
|Next day before 10:30am||£25.00||£25.00|
|Next day before 12:00pm||£20.00||£20.00|
£25 (Standard 2-3 Day Delivery Only)
AB30, AB31, AB32, AB33, AB34, AB35, AB36, AB37, AB38, AB44, AB45, AB46, AB47, AB48, AB49, AB50, AB51, AB52, AB53, AB54, AB55, AB56, FK, G83, IV, KW1, KW2, KW3, KW4, KW5, KW6, KW7, KW8, KW9, KW10, KW11, KW12, KW13, KW14, PA, PH, HS, KA27, KA28, ZE
£35 (Standard 2-3 Day Delivery Only)
£50 (Standard 2-3 Day Delivery Only)
Please note that all carriage prices are quoted without V.A.T. at the current rate.
Scottish Islands - outside standard distribution area, please contact us for a quote.
There may be an exception for heavy goods when purchased in quantity where we will contact you to advise any additional charges.
Next Day delivery and Saturday Service is available on stocked items for orders received before 11:00am only.
Because of the nature of our products, we use specially selected carriers to ensure safe and prompt delivery to you.
Please note: Any time or date named by Rawlins Paints Limited for delivery is given and intended as an estimate only and Rawlins Paints Limited shall not be liable to make good any damage or loss whether arising directly or indirectly out of a delay in delivery. Deliveries are made using a reliable nationwide carrier. Although over 99% of consignments arrive on time, we recommend that no labour is employed to undertake work until materials have arrived on site.