|Typical Coverage (per coat)||1m² per litre at 1000μm dry|
|Touch Dry||16 Hours|
Rust-Oleum B95SL Flexible Self Levelling Epoxy is a virtually solvent free, two component epoxy flooring system, with a convenient 1:1 mixing ratio. It should be used on cleaned, horizontal concrete, asphalt-concrete, or other floors where flexibility is required. The coating offers protection against abrasion and impact and can be applied up to 2mm thick in just one coat.Read Full Description
£112.14 + VAT
This product is not sold individually. You must select at least 1 quantity for this product.
Warning: Last items in stock!
Rust-Oleum B95SL Flexible Self Levelling Epoxy is a virtually solvent free, two component epoxy flooring system, with a convenient 1:1 mixing ratio. Rust-Oleum B95SL Flexible Self Levelling Epoxy should be used on cleaned, horizontal concrete, asphalt-concrete, or other floors where flexibility is required. It can also be applied on cleaned, well adhering old epoxy floor coatings. The coating offers protection against abrasion and impact and can be applied in a dry film thickness of 150-200μm (roller) or up to 2mm (rake) in one coat. If good U.V. and chemical resistance is required, Rust-Oleum 9600 Rust-O-Thane Polyurethane or Rust-Oleum 9200 Rust-O-Thane should be applied (except for 9211 or 9610 clear).
Features & Benefits
General: remove oil, grease and all other surface contamination by alkaline or (high pressure) steam cleaning. The surface should be clean and dry during application. Previously coated surfaces must be in sound condition and should be roughened in order to achieve optimal adhesion. A test-patch is recommended to check compatibility.
Concrete: new concrete should cure and dry for at least 30 days prior to the application of the product. Concrete curing compounds should be removed completely. All laitance, loose or unsound concrete should be removed by vacuum blasting or etching with Rust-Oleum Mathys 108 Surfa Etch Solution. Irregularities should be levelled with Rust-Oleum 5170 Scrape Coat. Defects in the concrete should be repaired with Rust-Oleum 5180 Epoxy Repair Mortar or Rust-Oleum 5140 Light Duty Epoxy Repair Mortar directly after having primed with Rust-Oleum 5401 Epoxy Impregnation Primer (wet into wet). For details see the Product Data Sheets. Very porous concrete should be primed with Rust-Oleum 5401 Epoxy Impregnation Primer.
Asphalt-concrete: New asphalt-concrete should cure and dry for at least 60 days prior to the application of the product. Defects in the surface should be repaired with the Rust-Oleum B95SL Flexible Self Levelling Epoxy, with fire-dried quartz sand mixed into a ratio of approx. 1:1 in volume.
Directions for Use
Stir individual components thoroughly before mixing them together. Use the boxing method or low speed mixer.
|Product Number||Blade Number||D.F.T.|
Temperature of air and substrate between 10 and 35°C and relative humidity below 85%. The substrate temperature must be at least 3°C above dew point.
Maximum dry film thickness per coat: 2mm dry, equals 2mm wet. Check coverage regularly during application. Food should be stored separately or covered adequately during application of the coating. Some chemicals and solvents may cause discoloration and can affect the coating. The floor should be horizontal (max. 3mm per metre incline, according to DIN 18 202, Table 3, Column 4) before applying the material in order to avoid excessive differences in dry film thickness. Expansion joints should be filled with a flexible sealant. Rust-Oleum B95SL Flexible Self Levelling Epoxy should always be top coated with Rust-Oleum 9600 Rust-O-Thane Polyurethane or Rust-Oleum 9200 Rust-O-Thane.
Be the first to ask a question about this product!
Free delivery on orders over £75 (terms & conditions)
• Deliveries will be made within 3 working days (standard delivery)
• You must be UK mainland based for the free delivery offer.
• Postcodes listed are excluded from the free delivery and priced below.
Please note: deliveries will need to be signed for at the point of delivery.
|UK Mainland Only||Up to £75.00||£75.01 +|
|Standard (2/3 working days)||£8.00||FREE|
|Next day before 09:00am||£30.00||£30.00|
|Next day before 10:30am||£25.00||£25.00|
|Next day before 12:00pm||£20.00||£20.00|
£25 (Standard 2-3 Day Delivery Only)
AB30, AB31, AB32, AB33, AB34, AB35, AB36, AB37, AB38, AB44, AB45, AB46, AB47, AB48, AB49, AB50, AB51, AB52, AB53, AB54, AB55, AB56, FK, G83, IV, KW1, KW2, KW3, KW4, KW5, KW6, KW7, KW8, KW9, KW10, KW11, KW12, KW13, KW14, PA, PH, HS, KA27, KA28, ZE
£35 (Standard 2-3 Day Delivery Only)
£50 (Standard 2-3 Day Delivery Only)
Please note that all carriage prices are quoted without V.A.T. at the current rate.
Scottish Islands - outside standard distribution area, please contact us for a quote.
There may be an exception for heavy goods when purchased in quantity where we will contact you to advise any additional charges.
Next Day delivery and Saturday Service is available on stocked items for orders received before 11:00am only.
Because of the nature of our products, we use specially selected carriers to ensure safe and prompt delivery to you.
Please note: Any time or date named by Rawlins Paints Limited for delivery is given and intended as an estimate only and Rawlins Paints Limited shall not be liable to make good any damage or loss whether arising directly or indirectly out of a delay in delivery. Deliveries are made using a reliable nationwide carrier. Although over 99% of consignments arrive on time, we recommend that no labour is employed to undertake work until materials have arrived on site.