"

Blackfriar Professional Epoxy Floor Paint

Water Based Epoxy Floor Paint View larger
Typical Coverage (per coat)10-12m² per litre
Touch Dry4-6 Hours
ApplicationBrush, Roller
The figures stated above are approximate. Please ensure you refer to all datasheets for full application information.

Blackfriar Professional Epoxy Floor Paint is a a hard-wearing, heavy duty, easy-to-clean floor coating ideal for indoor and outdoor heavy traffic areas. Excellent resistance to chemicals and abrasion, while its low-odour formula makes it ideal for sensitive areas.

Read Full Description

More details

£89.95 + VAT

Blackfriar Professional Epoxy Floor Paint is a two-pack, water based, exceptionally hard-wearing, low-odour heavy duty floor coating ideal for heavy traffic areas. Outstanding resistance to oil, chemicals, solvents and abrasion.

Features & Benefits

  • Water Based formulation, ideal for use in hospitals and food and drink environments.
  • Resists grease, oil and weak solutions of acid and alkali.
  • Designed for heavy traffic environments.
  • Prevents the dusting of concrete surfaces.
  • Indoor and outdoor use.
  • Brush or roller application.
  • Can be applied over existing surfaces such as brickwork, concrete, cement, wood, metal and stone.
  • Can be tinted to any BS4800, RAL and NCS colour (except metallic and fluorescent shades)

Preparation

Ensure the surface to be painted is sound, clean, dry and free from grease or any substance liable to give adhesion problems. Scrape off any old or flaking paint until you have a firm surface. Special attention should be given to areas under cars to ensure all oil, grease, dirt and road salt is removed. New concrete must be left for at least 6 months before applying Blackfriar Professional Epoxy Floor Paint.

Application

Stir base thoroughly before adding all of the activator then mix well. DO NOT MIX PART UNITS. Allow to rest for 5 minutes before using. Pot life is 2-3 hours at 20°C. Apply with a brush or roller working the paint in any surface imperfections. On bare or new surfaces first apply Blackfriar Professional Epoxy Floor Primer followed by 1-2 coats of Blackfriar Professional Epoxy Floor Paint. On previously painted surfaces apply 1-2 coats as required. Blackfriar Professional Epoxy Floor Paint is not suitable for use over PVC, thermoplastic tiles, quarry tiles, or granolithic concrete. Do not apply it on concrete surfaces treated with alkali containing liquids, areas subjected to rising damp or areas treated with PVA bonding solutions. Do not apply in cold (below 10°C), damp or humid conditions. If concrete floors are very smooth then pre-treat with Blackfriar Professional Acid Etch followed after thorough rinsing by Blackfriar Professional Epoxy Floor Primer prior to applying 1-2 coats of Blackfriar Professional Water Based Epoxy Floor Paint. Surfaces are slippery when wet. To ensure slip resistance the floor must be kept dry when in use. The use of protective mats will help preserve the surface under tyres.

Send us your question

Question

Are testers available for Blackfriar Professional Water Based Epoxy Floor Paint? It's hard to know how it would look down.

Alex from london (Uk) - 09/06/15

Answer

No, but we do have some good colour cards for this product which show an accurate colour and finish of the product. If you'd like us to send one out to you please contact us with your address details.

Question about the product

I have read and agree to the Conditions of Use (read) Send

The question has been correctly sent

Free delivery on orders over £75 (terms & conditions)

• Deliveries will be made within 3 working days (standard delivery)
• You must be UK mainland based for the free delivery offer.
• Postcodes listed are excluded from the free delivery and priced below.

Please note: deliveries will need to be signed for at the point of delivery.

UK Mainland OnlyUp to £75.00£75.01 +
Standard (2/3 working days)£8.00FREE
Next Day£15.00£15.00
Next day before 09:00am£30.00£30.00
Next day before 10:30am£25.00£25.00
Next day before 12:00pm£20.00£20.00
Saturday Delivery£35.00£35.00














£25 (Standard 2-3 Day Delivery Only)

AB30, AB31, AB32, AB33, AB34, AB35, AB36, AB37, AB38, AB44, AB45, AB46, AB47, AB48, AB49, AB50, AB51, AB52, AB53, AB54, AB55, AB56, FK, G83, IV, KW1, KW2, KW3, KW4, KW5, KW6, KW7, KW8, KW9, KW10, KW11, KW12, KW13, KW14, PA, PH, HS, KA27, KA28, ZE

£35 (Standard 2-3 Day Delivery Only)

BT, IM

£50 (Standard 2-3 Day Delivery Only)

JE, GY

Please note that all carriage prices are quoted without V.A.T. at the current rate.

Scottish Islands - outside standard distribution area, please contact us for a quote.

There may be an exception for heavy goods when purchased in quantity where we will contact you to advise any additional charges.

Next Day delivery and Saturday Service is available on stocked items for orders received before 11:00am only.

Because of the nature of our products, we use specially selected carriers to ensure safe and prompt delivery to you.

Please note: Any time or date named by Rawlins Paints Limited for delivery is given and intended as an estimate only and Rawlins Paints Limited shall not be liable to make good any damage or loss whether arising directly or indirectly out of a delay in delivery. Deliveries are made using a reliable nationwide carrier. Although over 99% of consignments arrive on time, we recommend that no labour is employed to undertake work until materials have arrived on site.

BF WB EFP TDS

Download

BF WB EFP MSDS Activator

Download

BF WB EFP MSDS Black

Download

BF WB EFP MSDS White

Download

BF WB EFP MSDS Red

Download

BF WB EFP MSDS Tile Red

Download

BF WB EFP MSDS Yellow

Download

BF WB EFP MSDS Green

Download