|Typical Coverage (per coat)||12m² per litre|
|Touch Dry||2 Hours|
Blackfriar Professional High Traffic Floor Paint is an exceptionally hard-wearing, high performance, easy-to-clean 2-pack solvent based floor coating ideal for indoor and outdoor use. Provides outstanding resistance to a wide range of chemicals, non-yellowing, excellent colour fastness.Read Full Description
£75.09 + VAT
This product is not sold individually. You must select at least 1 quantity for this product.
Warning: Last items in stock!
Blackfriar Professional High Traffic Floor Paint is an exceptionally hard-wearing, high performance, easy-to-clean 2-pack floor coating, ideal for indoor and outdoor use. It can be tinted to any RAL, BS or NCS colour (except metallic and fluorescent shades) and is available in Tile Red and Mid Grey colours as standard, it produces a non-yellowing, semi-gloss, colour-fast finish.
Blackfriar Professional High Traffic Floor Paint provides an exceptionally hard wearing finish for surfaces such as brickwork, concrete, metal and stone. It protects floors with an easy-to-clean two pack solvent based polyurethane coating giving excellent resistance to solvents, grease, oil and solutions of acid and alkali, making it ideal for commercial and industrial use.
Features & Benefits
Ensure the surface to be painted is sound, clean, dry and free from grease or any substance liable to give adhesion problems. Scrape off any old or flaking paint until you have a firm surface. Special attention should be given to areas under cars to ensure all oil, grease, dirt and road salt is removed. Prepared surfaces with residual oil contamination should be primed with Blackfriar Professional Oil Tolerant Primer. New concrete must be left for at least 6 months before applying Blackfriar Professional High Traffic Floor Paint. Power-floated floors should either be blast tracked or treated with Blackfriar Professional Acid Etch followed by thorough rinsing. New or exposed bare concrete should be primed with Blackfriar Professional Epoxy Floor Primer.
Base and activator are supplied in correct proportions. Add all activator to base container and mix thoroughly for at least 5 minutes until product is smooth and even. Allow to rest 5 minutes before using. DO NOT MIX PART UNITS. Badly activated or incorrectly mixed materials will affect performance and may cause early failure or discolouration. The mixed material has a usable pot life of 6 hours at 20°C.
Apply with a good quality medium pile roller - smaller areas may be brushed.
Not suitable for spray. Blackfriar Professional High Traffic Floor Paint is not suitable for use over PVC, thermoplastic tiles, quarry tiles or granolithic concrete. Do not apply it on concrete surfaces treated with alkali containing liquids, areas subjected to rising damp or areas treated with PVA bonding solutions. If applying over single pack conventional floor paint the existing coating must be aged and fully cured. Surfaces may be slippery when wet. To ensure slip resistance the floor must be kept dry when in use. The use of protective mats will help preserve the surface under tyres.
how does this product deal with (skydrol) aircraft hydraulic fluid, which are phosphate ether based? and what floor preparation is required? chemical /mechanical? do you offer product solutions to floors that require sealing first i.e concrete saturated in fluid
gary from london (uk) - 14/03/16
There has been no testing carried out on Blackfriar Professional High Traffic Floor Paint for Skydrol exposure but our 310 Chemical Resistant Coating and 304 HD Epoxy Floor Coating have both been tested for full immersion. Under fully immersed conditions (i.e. constant contact/exposure) 304 would require re-coating after 1-2 years and 310 would require coating after 5-10 years.
Concrete should be a minimum of 21 days old and/or the residual moisture content below 6%. Ensure that the concrete is clean and free from dust, laitance, grease, oil, curing compound and existing paint finishes etc. Blow holes and defective concrete can be made good using 201 Epoxy Repair Mortar. Suitable mechanical treatment such as vacuum grit blasting of suitable diamond floor grinding is the preferred treatment prior to application as this ensures a mechanical ‘key’ for the coating.
A coat of 401 Epoxy Floor Primer is recommended on absorbent concrete surfaces. Substrates with high moisture content or oil contamination can still be coated in most instances by the inclusion of one of our specialist primers. Please see 402 Damp Proof Coating and 403 Oil Tolerant Primer for full details.
Free delivery on orders over £75 (terms & conditions)
• Deliveries will be made within 3 working days (standard delivery)
• You must be UK mainland based for the free delivery offer.
• Postcodes listed are excluded from the free delivery and priced below.
Please note: deliveries will need to be signed for at the point of delivery.
|UK Mainland Only||Up to £75.00||£75.01 +|
|Standard (2/3 working days)||£8.00||FREE|
|Next day before 09:00am||£30.00||£30.00|
|Next day before 10:30am||£25.00||£25.00|
|Next day before 12:00pm||£20.00||£20.00|
£25 (Standard 2-3 Day Delivery Only)
AB30, AB31, AB32, AB33, AB34, AB35, AB36, AB37, AB38, AB44, AB45, AB46, AB47, AB48, AB49, AB50, AB51, AB52, AB53, AB54, AB55, AB56, FK, G83, IV, KW1, KW2, KW3, KW4, KW5, KW6, KW7, KW8, KW9, KW10, KW11, KW12, KW13, KW14, PA, PH, HS, KA27, KA28, ZE
£35 (Standard 2-3 Day Delivery Only)
£50 (Standard 2-3 Day Delivery Only)
Please note that all carriage prices are quoted without V.A.T. at the current rate.
Scottish Islands - outside standard distribution area, please contact us for a quote.
There may be an exception for heavy goods when purchased in quantity where we will contact you to advise any additional charges.
Next Day delivery and Saturday Service is available on stocked items for orders received before 11:00am only.
Because of the nature of our products, we use specially selected carriers to ensure safe and prompt delivery to you.
Please note: Any time or date named by Rawlins Paints Limited for delivery is given and intended as an estimate only and Rawlins Paints Limited shall not be liable to make good any damage or loss whether arising directly or indirectly out of a delay in delivery. Deliveries are made using a reliable nationwide carrier. Although over 99% of consignments arrive on time, we recommend that no labour is employed to undertake work until materials have arrived on site.