"

402 Damp Proof Coating

402 Damp Proof Coating View larger
Typical Coverage (per coat)3-4m² per kg
Touch Dry6 Hours
ApplicationBrush, Roller, Spray
The figures stated above are approximate. Please ensure you refer to all datasheets for full application information.

402 Damp Proof Coating can be used as a primer or a high build coating in its own right for damp, minimally prepared substrates. It has been developed to supress residual construction moisture, allowing the user to coat new concrete floors earlier in fast track building programmes.

Read Full Description

More details

£74.84 + VAT

402 Damp Proof Coating can be used as a primer or a high build coating in its own right for damp, minimally prepared substrates. It has been developed to supress residual construction moisture, allowing the user to coat new concrete floors earlier in fast track building programmes.

402 Damp Proof Coating is a two pack epoxy resin based primer/coating, one or two coats may be applied depending on the degree of dampness present in the sub-floor. It is available in grey, red, and clear colours to allow control of uniform coverage, a Winter Grade version of this product is also available for applications in lower temperatures or when an especially quick return to service is required.

Advantages

  • Provides a surface damp-proof membrane
  • Allows rapid laying of floor toppings to power floated concrete
  • Solvent free, low odour
  • Coloured to monitor progress
  • Low viscosity, easily applied
  • Excellent adhesion
  • Surface tolerant
  • Excellent resistance to water, grease and oil
  • Can be used as a primer or finished floor coating

Recommended Uses

  • As a surface damp-proof membrane.
  • As a moisture suppressant on concrete and sand/cement screeds.
  • As a damp tolerant primer for concrete and resin screeds.
  • As a surface and damp tolerant floor coating.

Send us your question

Be the first to ask a question about this product!

Question about the product

I have read and agree to the Conditions of Use (read) Send

The question has been correctly sent

Free delivery on orders over £75 (terms & conditions)

• Deliveries will be made within 3 working days (standard delivery)
• You must be UK mainland based for the free delivery offer.
• Postcodes listed are excluded from the free delivery and priced below.

Please note: deliveries will need to be signed for at the point of delivery.

UK Mainland OnlyUp to £75.00£75.01 +
Standard (2/3 working days)£8.00FREE
Next Day£15.00£15.00
Next day before 09:00am£30.00£30.00
Next day before 10:30am£25.00£25.00
Next day before 12:00pm£20.00£20.00
Saturday Delivery£35.00£35.00














£25 (Standard 2-3 Day Delivery Only)

AB30, AB31, AB32, AB33, AB34, AB35, AB36, AB37, AB38, AB44, AB45, AB46, AB47, AB48, AB49, AB50, AB51, AB52, AB53, AB54, AB55, AB56, FK, G83, IV, KW1, KW2, KW3, KW4, KW5, KW6, KW7, KW8, KW9, KW10, KW11, KW12, KW13, KW14, PA, PH, HS, KA27, KA28, ZE

£35 (Standard 2-3 Day Delivery Only)

BT, IM

£50 (Standard 2-3 Day Delivery Only)

JE, GY

Please note that all carriage prices are quoted without V.A.T. at the current rate.

Scottish Islands - outside standard distribution area, please contact us for a quote.

There may be an exception for heavy goods when purchased in quantity where we will contact you to advise any additional charges.

Next Day delivery and Saturday Service is available on stocked items for orders received before 11:00am only.

Because of the nature of our products, we use specially selected carriers to ensure safe and prompt delivery to you.

Please note: Any time or date named by Rawlins Paints Limited for delivery is given and intended as an estimate only and Rawlins Paints Limited shall not be liable to make good any damage or loss whether arising directly or indirectly out of a delay in delivery. Deliveries are made using a reliable nationwide carrier. Although over 99% of consignments arrive on time, we recommend that no labour is employed to undertake work until materials have arrived on site.

402 Damp Proof Coating TDS

Download

402 Damp Proof Coating Base MSDS

Download

402 Damp Proof Coating Curing Agent MSDS

Download