Rust-Oleum Epoxyshield Anti-Slip Additive can be added to any of the Epoxyshield Floor Coatings range - Epoxyshield Ultra, Epoxyshield Sealer, Epoxyshield Maxx and Epoxyshield Garage Floor Coating to produce a non-skid surface.
Rust-Oleum Epoxyshield Anti-Slip Additive
To be added to any of the Epoxyshield Floor Coatings range - Epoxyshield Ultra, Epoxyshield Sealer, Epoxyshield Maxx and Epoxyshield Garage Floor Coating to produce a non-skid surface.
Rust-Oleum Epoxyshied Anti-Slip Additive if broadcast/sprinkled into the freshly applied wet coating should be over coated to encapsulate the additive fully. A coat over the additive will also make cleaning of the finished floor surface significantly easier.
• Non-skid floor additive based on thermally split flint stones
• Formulated for use with Epoxyshield floor coatings
• Can be mixed into coating or broadcast over the final (wet) finish
• Produces a rough, non-skid surface
| Technical Data | |
|---|---|
| Density: | 2,3 |
| Solids content in volume: | 100 % |
| Solids Content in weight: | 100 % |
Theoretical Consumption
Practical Consumption
Practical usage depends on many factors such as type and amount of contaminants, shape of the substrate and material losses during application.
Directions For Use
Sprinkling: sprinkle the granulates onto the freshly applied, wet RUST-OLEUM coating, manually with a "sprinkler-box" for small areas, or with special low-pressure spraying equipment with a nozzle opening of at least 18 mm ; air pressure between 1 - 3 bars.
Mixing: mix the granulates into the wet coating material and apply the coating with a roller or a brush (not by spraying), stir regularly to avoid settling of the granulates.
Application Condition
For optimum results, follow the application conditions with the applied RUST-OLEUM Floor Coating
Remarks
For coating systems with a dry film thickness less than 300 µm it is recommended to use NS 200. For 1K-paints, use NS100. Particle size: NS200: 0.2 - 0.5 mm, NS300: 0.5 - 1.0 mm, NS500: 0.8 - 1.5 mm. NS500 is available in white (aluminium oxide) and black (carborundum/iron oxide) - use white for light coating colours and black for darker coating colours.
Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Rust-Oleum Epoxyshield Anti-Slip Additive is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Rust-Oleum 5200 Epoxyshield Ultra is a 5 litre, satin finish, quick-drying single pack water-based floor coating for garage floors, and light to medium duty (normal foot traffic/limited vehicular traffic): Part of the Epoxyshield range Good resistance to diesel, motor oil, coolant fluid, various household chemicals and most types of tyre...
£69.17 (incl. VAT)
£57.64 (ex. VAT)
Rust-Oleum 5300 Epoxyshield Maxx is a 5 litre, gloss finish, water-based 2-component epoxy concrete floor coating with ultimate adhesion and durability on concrete.Part of the Epoxyshield range Maximum durability in just 1 coat For medium to heavy traffic Best possible car tyre resistance Easy to apply, no primer required Note:...
£97.79 (incl. VAT)
£81.49 (ex. VAT)
Rust-Oleum Epoxyshield Garage Floor Coating Kit is a two-component epoxy formula for the ultimate garage floor, saving time and providing an easy clean, showroom-quality appearance on concrete floors. Complete DIY kit including decorative chips/flakes, paint paddle, instructions and DVD One kit covers up to 25m² Durable and timesaving...
£89.21 (incl. VAT)
£74.34 (ex. VAT)
Rust-Oleum 5220 Epoxyshield Sealer is a one-component, water-based, concrete sealer based on a vinyl acrylic binder: Part of the Epoxyshield range Reduces dust production on concrete Protects against moisture, road salts, liquid and chemical spills Suitable for garage floors Cost-effective, quick drying and easy to apply Touch dry...
£50.68 (incl. VAT)
£42.23 (ex. VAT)
Rust-Oleum Non-Skid Additive NS 200 is a specially selected non-skid additive that can be mixed with the required Rust-Oleum coating system or sprinkled into the freshly applied coating to produce a non-skid surface.Durable aluminium oxide anti-slip additive Resists vehicular traffic Choice of 3 different granule sizes Can be pre-mixed...
£7.92 (incl. VAT)
£6.60 (ex. VAT)
Rust-Oleum Non-Skid Additive NS 100 an anti-slip HDPE granulate that turns a standard floor coating into a durable anti-slip coating. It is intended to be added to 1K floor paint to produce a subtle non-skid surface, that is easier to clean than coarse anti-slip floors.Smaller size granules for more subtle anti-slip finish Designed for...
£7.94 (incl. VAT)
£6.62 (ex. VAT)
