"

Jotun Safeguard Universal ES

Jotun Safeguard Universal ES View larger
Typical Coverage (per coat)4.1m² per litre
Touch Dry2 Hours
ApplicationBrush, Spray
The figures stated above are approximate. Please ensure you refer to all datasheets for full application information.

Jotun Safeguard Universal ES is a two component polyamide cured vinyl epoxy based coating. Specially designed as a tie coat between epoxy primers and antifouling systems but can be used as tie coat for a wide range of topcoats. To be used as tie coat in atmospheric and immersed environments.

Read Full Description

More details

£108.35 + VAT

Jotun Safeguard Universal ES is a two component polyamide cured vinyl epoxy based coating. Specially designed as a tie coat between epoxy primers and antifouling systems but can be used as tie coat for a wide range of topcoats. To be used as tie coat in atmospheric and immersed environments. Suitable on approved primers on aluminium, carbon steel, galvanised and stainless steel substrates. It can be applied at sub zero surface temperatures.

Features & Benefits

  • Good workability, especially in warm climate compared to Vinyguard
  • High volume solids
  • Good adhesion with self-polishing antifouling
  • Good anticorrosion protection

Typical uses

General:
Suitable as tie coat for a wide range of Jotun antifouling products.

Marine:
Exterior areas, specially designed for outside hull, may be used on superstructure, decks and other external areas.

Protective:
Suitable as tie coat in a complete system exposed to a wide range of corrosive environments up to very high and immersed. Recommended for offshore environments, including splash zones, water inlets, cooling pipes, jetties and bridges.

Send us your question

Be the first to ask a question about this product!

Question about the product

I have read and agree to the Conditions of Use (read) Send

The question has been correctly sent

Free delivery on orders over £75 (terms & conditions)

• Deliveries will be made within 3 working days (standard delivery)
• You must be UK mainland based for the free delivery offer.
• Postcodes listed are excluded from the free delivery and priced below.

Please note: deliveries will need to be signed for at the point of delivery.

UK Mainland OnlyUp to £75.00£75.01 +
Standard (2/3 working days)£8.00FREE
Next Day£15.00£15.00
Next day before 09:00am£30.00£30.00
Next day before 10:30am£25.00£25.00
Next day before 12:00pm£20.00£20.00
Saturday Delivery£35.00£35.00














£25 (Standard 2-3 Day Delivery Only)

AB30, AB31, AB32, AB33, AB34, AB35, AB36, AB37, AB38, AB44, AB45, AB46, AB47, AB48, AB49, AB50, AB51, AB52, AB53, AB54, AB55, AB56, FK, G83, IV, KW1, KW2, KW3, KW4, KW5, KW6, KW7, KW8, KW9, KW10, KW11, KW12, KW13, KW14, PA, PH, HS, KA27, KA28, ZE

£35 (Standard 2-3 Day Delivery Only)

BT, IM

£50 (Standard 2-3 Day Delivery Only)

JE, GY

Please note that all carriage prices are quoted without V.A.T. at the current rate.

Scottish Islands - outside standard distribution area, please contact us for a quote.

There may be an exception for heavy goods when purchased in quantity where we will contact you to advise any additional charges.

Next Day delivery and Saturday Service is available on stocked items for orders received before 11:00am only.

Because of the nature of our products, we use specially selected carriers to ensure safe and prompt delivery to you.

Please note: Any time or date named by Rawlins Paints Limited for delivery is given and intended as an estimate only and Rawlins Paints Limited shall not be liable to make good any damage or loss whether arising directly or indirectly out of a delay in delivery. Deliveries are made using a reliable nationwide carrier. Although over 99% of consignments arrive on time, we recommend that no labour is employed to undertake work until materials have arrived on site.

Safeguard Universal TDS

Download

Safeguard Universal Comp A MSDS

Download

Safeguard Universal Comp B MSDS

Download

Safeguard Universal App. Guide

Download