Teamac Black Tar Varnish, is a synthetic tar varnish for industrial, agricultural and marine use. It is used for the protection of (weathered) wood, metal and other surfaces, inside or outside and should be used on barns, farm buildings, roofs etc. and marine applications.
Teamac Black Tar Varnish, is a synthetic tar varnish for industrial, agricultural and marine use. It is used for the protection of (weathered) wood, metal and other surfaces, inside or outside and should be used on barns, farm buildings, roofs etc. and marine applications.
Advantages
| Technical Data | |
|---|---|
| Volume Solids | 60% |
| VOC Content | 350 g/litre |
| SG | 0.9°C |
| Viscostity | Approx 3 Poise - C&P @ 25°C |
| Flash Point | Above 32 (closed cup) |
| Product Data | |||
|---|---|---|---|
| Dry Film Thickness | Wet Film Thickness | Theoretical Coverage | |
| Maximum | 50 μm | 85 μm | 8 m12/litre @ 50 microns D.F.T |
The practical spreading rate may be lower as this depends on factors such as the porosity and roughness of the surface to be painted and material losses during application.
| Drying Times At 20°C/RH 50% | |
|---|---|
| Touch Dry: | 1.5 Hours |
| Dry To Handle: | 4 Hours |
| Dry To Recoat: | 8 hours or overnight |
| Fully Cured: | 3 - 5 Days |
Low temperature and high humidity will adversely affect application, drying and performance of any coating.
| Method | Airless Spray | Conventional Spray | Brush | Roller |
|---|---|---|---|---|
| No | No | Yes | No |
See safety data sheet - SDS 10744 in the attachments section above.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
 pat mccarthy on 2022-05-08 21:53:17 | Question: Ho effective would this be on a wooden hull of an old boat regarding water ingress |
Answer from Rawlins’ Technical Team: Assuming the hull is clean, dry, sound, watertight and prepared as detailed in the technical data sheet we can recommend Teamac Hull Blacking for this application. This has excellent water resistance. | |
| Mark Naylor on 2022-01-28 09:51:57 | Question: My boat currently has comastic on the Hull, can I use this as Hull blacking over comastic? And how does it compare to comastic in terms of coverage and longevity? Thanks. |
Answer from Rawlins’ Technical Team: No, for this application we would recommend Teamac Hull Blacking, this will be suitable for application over Cosmatic assuming the areas are clean, dry, sound and prepared as detailed in the technical data sheet. But as this is a bitumen based product any further coating will need to be bitumen based also. | |
| christine mortimer on 2019-02-12 18:10:49 | Question: How many coats would this product need to ensure a nice black finish. |
Answer from Rawlins’ Technical Team: 2 - 3 coats is recommended. | |
Teamac Black Tar Varnish is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Teamac Thinner 17, also known as Teamac Antifouling Thinners, a specially formulated blend of solvents designed to mix with its compatible Teamac or Coo-Var coating to create an optimal consistency for application.Suitabe for use with Brush, Roller or Spray. Can also be used for the cleaning of some surfaces prior to application of the...
£14.96 (incl. VAT)
£12.47 (ex. VAT)
General Painting Application Kit from Rawlins Paints provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site.Provides an economical way of making sure you will have what you need Ideal for interior and exterior paint projects Click to jump down to...
£12.04 (incl. VAT)
£10.03 (ex. VAT)
