"

Jotun Jotamastic SF WG

Jotun Jotamastic SF WG View larger
Typical Coverage (per coat)4.6m² per litre
Touch Dry10 Hours
ApplicationBrush, Roller, Spray
The figures stated above are approximate. Please ensure you refer to all datasheets for full application information.

Jotun Jotamastic SF WG is a 'Wintergrade' version of Jotun Jotamastic SF to aid application in lower temperatures and to provide faster drying and curing times. Jotun Jotamastic SF WG is a two component polyamine cured epoxy mastic coating that is a surface tolerant, solvent free, high build product. Well suited for early immersion.

Read Full Description

More details

£209.20 + VAT

Jotun Jotamastic SF WG is a 'Wintergrade' version of Jotun Jotamastic SF to aid application in lower temperatures and to provide faster drying and curing times. Jotun Jotamastic SF WG is a two component polyamine cured epoxy mastic coating that is a surface tolerant, solvent free, high build product. Well suited for early immersion and specially designed for areas where optimum surface preparation is not possible or desired. Provides long lasting protection in environments with high corrosivity and can be used as a primer, mid coat, finish coat or as a single coat system in atmospheric and immersed environments. Suitable for properly prepared carbon steel and aged coating surfaces.

Areas of Use
General: Primarily designed for maintenance and repair.
Marine: Outside hulls, exterior and interior areas, including water balast tanks. Suitable for water balast tanks at newbuilding stage.
Protective: Recommended for offshore environments, including splash zones, refineries, power plants, bridges, buildings, mining equipment and general structural steel.

Approvals and certificates

  • Food, Compliant with USA, FDA Title 21, Part 175.300 for dry solids
  • Grain, Newcastle Ocupational Health
  • Approved for PSPC for Water Balast Tanks according to IMO Res. MSC 215(82)

Additional certificates and approvals may be available on request.

Features & Benefits

  • Solvent free
  • Excellent edge covering properties
  • Good early water resistance
  • Safe application in confined spaces
  • Surface tolerant for maintenance and repair
  • Can be applied in low temperatures

Solvent Free Jotamastic corrosion protection
Jotun Jotamastic SF WG is a solvent free alternative offering the same surface tolerant properties as other Jotamastic products. Other benefits are, excellent edge covering and resistance to early immersion.

Surface Tolerant
Specially designed for areas where optimum surface preparation is not possible or desired, and therefor ideal for maintenance & repair.

Easy to use
Jotun Jotamastic SF WG offer good application properties with the use of standard application equipment

Solutions
For use in a wide range of solutions

  • Direct to metal 
  • As midcoat on zinc primers 
  • Immersed service 
  • Water ballast tanks

Send us your question

Be the first to ask a question about this product!

Question about the product

I have read and agree to the Conditions of Use (read) Send

The question has been correctly sent

Free delivery on orders over £75 (terms & conditions)

• Deliveries will be made within 3 working days (standard delivery)
• You must be UK mainland based for the free delivery offer.
• Postcodes listed are excluded from the free delivery and priced below.

Please note: deliveries will need to be signed for at the point of delivery.

UK Mainland OnlyUp to £75.00£75.01 +
Standard (2/3 working days)£8.00FREE
Next Day£15.00£15.00
Next day before 09:00am£30.00£30.00
Next day before 10:30am£25.00£25.00
Next day before 12:00pm£20.00£20.00
Saturday Delivery£35.00£35.00














£25 (Standard 2-3 Day Delivery Only)

AB30, AB31, AB32, AB33, AB34, AB35, AB36, AB37, AB38, AB44, AB45, AB46, AB47, AB48, AB49, AB50, AB51, AB52, AB53, AB54, AB55, AB56, FK, G83, IV, KW1, KW2, KW3, KW4, KW5, KW6, KW7, KW8, KW9, KW10, KW11, KW12, KW13, KW14, PA, PH, HS, KA27, KA28, ZE

£35 (Standard 2-3 Day Delivery Only)

BT, IM

£50 (Standard 2-3 Day Delivery Only)

JE, GY

Please note that all carriage prices are quoted without V.A.T. at the current rate.

Scottish Islands - outside standard distribution area, please contact us for a quote.

There may be an exception for heavy goods when purchased in quantity where we will contact you to advise any additional charges.

Next Day delivery and Saturday Service is available on stocked items for orders received before 11:00am only.

Because of the nature of our products, we use specially selected carriers to ensure safe and prompt delivery to you.

Please note: Any time or date named by Rawlins Paints Limited for delivery is given and intended as an estimate only and Rawlins Paints Limited shall not be liable to make good any damage or loss whether arising directly or indirectly out of a delay in delivery. Deliveries are made using a reliable nationwide carrier. Although over 99% of consignments arrive on time, we recommend that no labour is employed to undertake work until materials have arrived on site.

Jotamastic Brochure (Marine)

Download

Jotamastic Brochure (Protective)

Download

Jotamastic SF WG TDS

Download

Jotamastic SF WG Comp A MSDS

Download

Jotamastic SF WG Comp B MSDS

Download

Jotamastic SF WG App. Guide

Download