Jotun Hardtop Flexi is a high solids (64% volume) polyurethane topcoat with excellent wetting and adhesion properties. Hardtop Flexi has a remarkable ability to resist impact and will maintain initial gloss level over extended periods.
This is one of the few products that contain anti-corrosive pigments for the best direct to metal performance.
Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.
Professional use only - from the 24th August 2023, adequate training is required before industrial or professional use of this product.
Should you require training, visit - https://www.safeusediisocyanates.eu/
Professional use only - from the 24th August 2023, adequate training is required before industrial or professional use of this product.
Should you require training, visit - https://www.safeusediisocyanates.eu/
Jotun Hardtop Flexi is a high solids (64% volume) polyurethane topcoat with excellent wetting and adhesion properties. Hardtop Flexi has a remarkable ability to resist impact and will maintain initial gloss level over extended periods.
Low VOCs, application of single coats up to 150 microns and fast drying add to the features of Hardtop Flexi. This is one of the few products that contain anti-corrosive pigments for the best direct to metal performance.
Jotun Hardtop Flexi is a two-pack, high solid, flexible polyurethane coating with good gloss and colour retention. Jotun Hardtop Flexi can be used as a single coat system in atmospheric corrosivity classes C2 and C3. Can also be used as a topcoat in classes C2 - C4 and C5-I and C5-M on various primers and as maintenance coating on old paint surfaces.
Jotun Hardtop Flexi has a good impact resistance and painted objects can be stacked after short drying time. The product have built in good corrosion protection and is also suitable as a single product system for maintenance application when both corrosion protection and topcoat performance are desired.
Product Information
Features & Benefits
Primers
Hardtop Flexi will form a long lasting corrosion protection system together with primers like Barrier, Resist, Jotamastic, Penguard and Jotacote for a wide range of purposes.
Flexibility
A hybrid speciality binder ensures excellent flexibility, which enables the product to withstand stress and impact.
Direct-to-metal
Hardtop Flexi can be used as a one coat direct-to-metal product in atmospheric corrosivity classes C2 and C3 (acc. ISO 12944), due to a combination of anticorrosive pigments.
High build
A maximum DFT of 150 microns will enable you to achieve a better protection than with conventional polyurethanes.
Approvals & Certificates
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
 Rogan Brown on 2022-04-08 02:35:52 | Question: Hi there. I have purchased your Haedtop Flexi kit,1A,and I would like to know if it is spray paintable?Is the viscosity thin enough to use without thinning?Thanking you for your time. Regards, Rogan. |
Answer from Rawlins’ Technical Team: This product can be sprayed without thinning with the correct equipment. For airless spray application nozzle/tip size should be 15 to 21 inch/1000 at 150 bar. For conventional spray application with a HVLP spray gun 13-21 inch/1000 at 2.4bar. Preparation and application information are in the Technical data sheet, this can be found in the data sheets tab on the product page linked below. | |
Jotun Hardtop Flexi is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools)1 x Rust-Oleum...
£25.84 (incl. VAT)
£21.53 (ex. VAT)
