"

International Interseal 670HS

International Interseal 670HS View larger
Typical Coverage (per coat)6.56m² per litre
Touch Dry5 Hours
ApplicationBrush, Roller, Spray
The figures stated above are approximate. Please ensure you refer to all datasheets for full application information.

International Interseal 670HS is a low VOC, two component high build, high solids surface tolerant epoxy maintenance coating, for application to a wide variety of substrates including hand prepared rusty steel, abrasive blast cleaned and hydroblasted steel, and a wide range of intact, aged coatings.

Read Full Description

More details

£106.59 + VAT

International Interseal 670HS is a low VOC, two component high build, high solids surface tolerant epoxy maintenance coating. As a high build epoxy it is suitable for a variety of new construction applications including immersion, as a deck coating or for structural steel. Excellent anti-corrosive protection with minimal surface preparation even when applied over hand prepared rusty steel makes International Interseal 670HS perfect for maintenance too.

Intended Uses

  • For application to a wide variety of substrates including hand prepared rusty steel, abrasive blast cleaned and hydroblasted steel, and a wide range of intact, aged coatings.
  • Provides excellent anti-corrosive protection in industrial, coastal structures, pulp and paper plants, bridges and offshore environments in both atmospheric exposure and immersion service.
  • International Interseal 670HS can be used as part of a non-slip deck system in conjunction with appropriate aggregate*.

International Interseal 670HS is certified to NSF/ANSI Standard 61 (selected colours only). Certification is for tanks greater than 100 gallons (378.5 litres), for pipes which are 6 inches (15cm) in diameter or greater and for valves which are 2 inches (5cm) in diameter or greater.

Features & Benefits

  • High solids, low VOC, surface tolerant epoxy
  • High build - 100-200μm (4-8mils) per coat
  • Suitable for immersion
  • Exceptional corrosion resistance
  • Suitable for application over a range of aged coatings
  • Can be applied over abrasive blasted, hydroblasted or mechanically cleaned surfaces
  • Available in a range of colors as well as aluminium
  • Suitable for application temperatures from 10°C (50°F) to 40°C (104°F)
  • Compatible with cathodic protection
  • Certified to ANSI/NSF standard 61

International Interseal 670HS has the following specification approvals:

  • Complies with UK Department of Transport Item No. 116
  • Complies with UK Department of Transport Item No. 151

* International Interseal 670HS can be used as a non-skid deck system by modification with addition of GMA132 (crushed flint) aggregate. Application should then be to a suitably primed surface. Typical thicknesses will be between 500-1,000 microns (20-40 mils). Preferred application is by a suitable large tip hopper gun (e.g. Sagola 429 or Air texture gun fitted with a 5-10 mm nozzle). Trowel or roller can be used for small areas. Alternatively, a broadcast method of application can be used.

Send us your question

Be the first to ask a question about this product!

Question about the product

I have read and agree to the Conditions of Use (read) Send

The question has been correctly sent

Free delivery on orders over £75 (terms & conditions)

• Deliveries will be made within 3 working days (standard delivery)
• You must be UK mainland based for the free delivery offer.
• Postcodes listed are excluded from the free delivery and priced below.

Please note: deliveries will need to be signed for at the point of delivery.

UK Mainland OnlyUp to £75.00£75.01 +
Standard (2/3 working days)£8.00FREE
Next Day£15.00£15.00
Next day before 09:00am£30.00£30.00
Next day before 10:30am£25.00£25.00
Next day before 12:00pm£20.00£20.00
Saturday Delivery£35.00£35.00














£25 (Standard 2-3 Day Delivery Only)

AB30, AB31, AB32, AB33, AB34, AB35, AB36, AB37, AB38, AB44, AB45, AB46, AB47, AB48, AB49, AB50, AB51, AB52, AB53, AB54, AB55, AB56, FK, G83, IV, KW1, KW2, KW3, KW4, KW5, KW6, KW7, KW8, KW9, KW10, KW11, KW12, KW13, KW14, PA, PH, HS, KA27, KA28, ZE

£35 (Standard 2-3 Day Delivery Only)

BT, IM

£50 (Standard 2-3 Day Delivery Only)

JE, GY

Please note that all carriage prices are quoted without V.A.T. at the current rate.

Scottish Islands - outside standard distribution area, please contact us for a quote.

There may be an exception for heavy goods when purchased in quantity where we will contact you to advise any additional charges.

Next Day delivery and Saturday Service is available on stocked items for orders received before 11:00am only.

Because of the nature of our products, we use specially selected carriers to ensure safe and prompt delivery to you.

Please note: Any time or date named by Rawlins Paints Limited for delivery is given and intended as an estimate only and Rawlins Paints Limited shall not be liable to make good any damage or loss whether arising directly or indirectly out of a delay in delivery. Deliveries are made using a reliable nationwide carrier. Although over 99% of consignments arrive on time, we recommend that no labour is employed to undertake work until materials have arrived on site.

Interseal 670HS TDS

Download

Interseal 670HS Product Brochure

Download

Interseal 670HS Safety Advice Sheet

Download

Interseal 670HS MSDS Part B

Download

Interseal 670HS MSDS Aluminium Part A

Download

Interseal 670HS MSDS White Part A

Download

Interseal 670HS MSDS Light Base Part A

Download

Interseal 670HS MSDS Ultra Deep Base Part A

Download

Interseal 670HS MSDS Yellow Base Part A

Download
IMPORTANT
Whilst every effort is made to ensure our data sheets are up to date, we advise you check the latest revision directly with the manufacturer to ensure you have the most current version.
E J Rawlins & Co. Ltd trading as Rawlins Paints make available product data sheets and information in good faith but without warranty. We do not accept liability for any errors or omissions contained within the data sheets or any outdated versions.