International Interseal 670HS (Winter Grade) is supplied with a winter grade curing agent to enable more rapid cure at lower temperatures. The product is still a low VOC, two component high build, high solids surface tolerant epoxy maintenance coating, for application to a wide variety of substrates including hand prepared rusty steel and a wide range of intact, aged coatings.
International Interseal 670HS (Winter Grade) is a low VOC, two component high build, high solids surface tolerant epoxy maintenance coating. As a high build epoxy it is suitable for a variety of new construction applications including immersion, as a deck coating or for structural steel. Excellent anti-corrosive protection with minimal surface preparation even when applied over hand prepared rusty steel makes International Interseal 670HS perfect for maintenance too.
Low Temperature Curing
International Interseal 670HS (Winter Grade) is supplied with a winter grade curing agent to enable more rapid cure at temperatures less than 10°C (50°F), however this curing agent will give an initial shade variation and more rapid discoloration on weathering. International Interseal 670HS (Winter Grade) is capable of curing at temperatures below 0°C (32°F). However, this product should not be applied at temperatures below 0°C (32°F) where there is a possibility of ice formation on the substrate.
Intended Uses
International Interseal 670HS (Winter Grade) is certified to NSF/ANSI Standard 61 (selected colours only). Certification is for tanks greater than 100 gallons (378.5 litres), for pipes which are 6 inches (15cm) in diameter or greater and for valves which are 2 inches (5cm) in diameter or greater.
Features & Benefits
International Interseal 670HS has the following specification approvals:
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
International Interseal 670HS (Winter Grade) is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
International Interfine 629HS is a low VOC, high performance, two component, isocyanate free crosslinking acrylic finish which provides good durability in terms of colour and gloss retention.Designed as a finish coat for use in both new construction and industrial maintenance. For use in a wide variety of aggressive environments including...
£154.19 (incl. VAT)
£128.49 (ex. VAT)
International Interfine 878 is a high performance, two component, high solids finish which contains no free isocyanates, offers compliance to current VOC legislation, and affords extended lifetime to first maintenance when utilised as part of a high performance anticorrosive system.A step change in long term colour and gloss compared to...
£438.86 (incl. VAT)
£365.72 (ex. VAT)
International Interfine 979 significantly improves upon the gloss and colour retention exhibited by typical polyurethane finishes also displays the same corrosion resistance and has enhanced mechanical properties when compared to traditional epoxy technology.Excellent long term color and gloss retention Contains no free isocyanate Low...
£1,563.70 (incl. VAT)
£1,303.08 (ex. VAT)
International Intergard 740 is a two component epoxy finish coat.Suitable for brush, roller and spray application Suitable for use in a wide range of environments including offshore structures, petrochemical facilities, bridges, pulp and paper mills, and the power industry 4,800+ colours, inc. RAL, RAL Design & Effect, BS, NCS &...
£434.21 (incl. VAT)
£361.84 (ex. VAT)
International Thinner/Equipment Cleaner GTA822 is used for thinning compatible International products. It can also be used for the general cleaning of surafces and equipment after using the associated paint or coating. More Information Delivery Info
£62.93 (incl. VAT)
£52.44 (ex. VAT)
International Interthane 870 is high build which means it can reduce the number of coats you require and keep costs to a minimum. Semi-gloss and available in 4,800+ colours (including RAL 9007 Grey Aluminium), International Interthane 870 delivers excellent cosmetics and extended recoatability in both new construction and as an industrial...
£139.32 (incl. VAT)
£116.10 (ex. VAT)
International Interthane 990 is a two component acrylic polyurethane finish giving excellent durability and long term recoatability. Across the world, people are experiencing flexible application, extended recoat windows and reduced surface preparation costs with International Interthane 990 in both new construction and as a maintenance...
£130.20 (incl. VAT)
£108.50 (ex. VAT)
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools)1 x Rust-Oleum...
£25.84 (incl. VAT)
£21.53 (ex. VAT)
