"

International Interzone 954 (Rapid Cure)

International Interzone 954 View larger
Typical Coverage (per coat)1.7m² per litre
Touch DryPot Life reduced to 45mins
ApplicationBrush, Roller, Spray
The figures stated above are approximate. Please ensure you refer to all datasheets for full application information.

International Interzone 954 (Rapid Cure) is a faster drying version of Interzone 954 to be used in tidal areas where immersion will be rapid. Designed for use in offshore splashzone maintenance, where its continued cure under immersed conditions makes it ideal for coping with tidal movements and surges. May be applied to reoxidised and slightly damp surfaces.

Read Full Description

More details

£98.71 + VAT

International Interzone 954 (Rapid Cure) is a faster drying version of Interzone 954 to be used in tidal areas where immersion will be rapid. International Interzone 954 (Rapid Cure) is a two component, low VOC, high solids, modified epoxy barrier coat designed to give long term protection in a single coat application. Will continue to cure when immersed in water and has excellent cathodic disbondment resistance.

International Interzone 954 (Rapid Cure) is the trusted industry solution for protecting and maintaining structures operating in the most severe environments. A unique blend of properties gives Interzone 954 (Rapid Cure) long term performance in environments that combine a high potential for mechanical damage, chemical attack, atmospheric corrosion and immersion conditions. This versatility makes Interzone 954 (Rapid Cure) the all round heavy duty coating.

Intended Uses

  • International Interzone 954 (Rapid Cure) is primarily designed for use in offshore splashzone maintenance, where its continued cure under immersed conditions makes it ideal for coping with tidal movements and surges. May be applied to reoxidised and slightly damp surfaces. Interzone 954 (Rapid Cure) has also found extensive use in a number of other corrosive environments including pulp and paper plants, chemical plants, jetties and sluice gates.
  • As part of a non-slip deck system in conjunction with appropriate aggregate.

Features & Benefits

  • A high film build, high solids, abrasion resistant epoxy
  • Ideal for single coat application over hydroblasted surfaces (HB2) with tolerance to damp surfaces during application
  • Suitable for exposure to tidal sea water just 30 minutes after application (at 20ºC [70ºF])
  • Resistant to a wide range of chemicals
  • Excellent compatibility with sacrificial and impressed current cathodic protection systems
  • Approved to NORSOK M501 for decks (System 4), splashzone and submerged areas (System 7)
  • Available in a wide range of colors

International Interzone 954 (Rapid Cure) has been protecting steel in severe environments for over 25 years. With its extensive track record it has gained the industry’s trust as a unique, long term coating solution for the most challenging maintenance situations. Originally designed for the demanding protection of offshore oil and gas structures, Interzone 954 (Rapid Cure) unique blend of properties has also proven itself in a wide range of new construction applications in the mining and offshore wind power markets.

What makes International Interzone 954 (Rapid Cure) a true all round solution is its ability to provide high build protection in a single coat (typically 500μm [20 mils]). Combined with its surface tolerance and early water resistance this means the impact of the painting process can be minimized allowing rapid return to service and significantly reducing downtime and labour costs compared to a standard two coat epoxy system.

International Interzone 954 (Rapid Cure) offers a combination of properties meeting the challenges of protecting and maintaining structures in severe environments:

  • High surface tolerance allows application over hydroblasted surfaces (HB2), even if still damp, as well as power tool and hand prepared steel surfaces (St3) for atmospheric use, this saves time and money on surface preparation
  • Early resistance to tidal water movement just 30 minutes after application (at 20ºC [70ºF]), which is ideal for carrying out maintenance in splash zones or on jetty structures
  • High impact and abrasion resistance, preventing corrosion caused by mechanical damage through maintaining an intact protective barrier
  • Full immersion resistance to a number of aggressive chemicals such as 50% sodium hydroxide and 5% copper sulphate and good general splash and spill resistance to an even wider chemical range, including sulphuric acid, propanol, gasoline and sodium hydroxide

Its corrosion performance, versatility, and time saving value make Interzone 954 (Rapid Cure) the perfect choice for protecting and maintaining a vast range of applications in the offshore, chemical and mining industries, including:

  • Jetties and wharfs
  • Helicopter decks and walkways when combined with a suitable aggregate
  • Oil and gas platform jackets and offshore wind tower foundations
  • Coal thickener tank internals and processing vessels
  • Structural steel in wet, corrosive areas

Standard Colours

  • 'White' is comparable to BS 4800 10 B 15
  • 'Black' is comparable to RAL 9005
  • 'Yellow' is comparable to RAL 1023
  • 'Grey' is comparable to BS 4800 00 A 05

Chromascan Colours

  • A full range of RAL and BS colours are available in this product via the Chromascan colour mixing system.

Send us your question

Question

Can you use on rubber

Mr James jones from Birmingham (England) - 24/06/16

Answer

No, as it may crack and detach.

Question about the product

I have read and agree to the Conditions of Use (read) Send

The question has been correctly sent

Free delivery on orders over £75 (terms & conditions)

• Deliveries will be made within 3 working days (standard delivery)
• You must be UK mainland based for the free delivery offer.
• Postcodes listed are excluded from the free delivery and priced below.

Please note: deliveries will need to be signed for at the point of delivery.

UK Mainland OnlyUp to £75.00£75.01 +
Standard (2/3 working days)£8.00FREE
Next Day£15.00£15.00
Next day before 09:00am£30.00£30.00
Next day before 10:30am£25.00£25.00
Next day before 12:00pm£20.00£20.00
Saturday Delivery£35.00£35.00














£25 (Standard 2-3 Day Delivery Only)

AB30, AB31, AB32, AB33, AB34, AB35, AB36, AB37, AB38, AB44, AB45, AB46, AB47, AB48, AB49, AB50, AB51, AB52, AB53, AB54, AB55, AB56, FK, G83, IV, KW1, KW2, KW3, KW4, KW5, KW6, KW7, KW8, KW9, KW10, KW11, KW12, KW13, KW14, PA, PH, HS, KA27, KA28, ZE

£35 (Standard 2-3 Day Delivery Only)

BT, IM

£50 (Standard 2-3 Day Delivery Only)

JE, GY

Please note that all carriage prices are quoted without V.A.T. at the current rate.

Scottish Islands - outside standard distribution area, please contact us for a quote.

There may be an exception for heavy goods when purchased in quantity where we will contact you to advise any additional charges.

Next Day delivery and Saturday Service is available on stocked items for orders received before 11:00am only.

Because of the nature of our products, we use specially selected carriers to ensure safe and prompt delivery to you.

Please note: Any time or date named by Rawlins Paints Limited for delivery is given and intended as an estimate only and Rawlins Paints Limited shall not be liable to make good any damage or loss whether arising directly or indirectly out of a delay in delivery. Deliveries are made using a reliable nationwide carrier. Although over 99% of consignments arrive on time, we recommend that no labour is employed to undertake work until materials have arrived on site.