"

Sherwin-Williams Dura-Plate 301K

Sherwin-Williams Dura-Plate 301K View larger
Typical Coverage (per coat)3.3m² per litre
Touch Dry14 Hours
ApplicationBrush, Roller, Spray
The figures stated above are approximate. Please ensure you refer to all datasheets for full application information.

Sherwin-Williams Dura-Plate 301K is a solvent-free, surface and humidity tolerant two-pack modified epoxy that can be applied without dew point restrictions and over wet steel surfaces. It is an anticorrosive coating for long service life steel protection that can be used for both immersion and above the waterline service in marine, offshore, construction and industrial applications.

Read Full Description

More details

£97.63 + VAT

Sherwin-Williams Dura-Plate 301K is a solvent-free, surface and humidity tolerant two-pack modified epoxy. It can be applied without dew point restrictions and over wet steel surfaces. Sherwin-Williams Dura-Plate 301K shows good chemical resistance, abrasion resistance and edge-retentive properties. It can be applied over steel prepared by hydroblasting, grit blasting or mechanical tooling.

Features & Benefits

  • Excellent edge retention (when used with 301S)
  • No dew point or relative humidity restrictions
  • Excellent anticorrosive properties
  • Can be applied over wet substrates
  • Can be applied over medium flash rust
  • Excellent substrate and intercoat adhesion

Sherwin-Williams Dura-Plate 301K is an anticorrosive coating for long service life steel protection. It can be used for both immersion and above the waterline service in marine, offshore, construction and industrial applications.

Sherwin-Williams Dura-Plate 301K is suitable for new building, conversion, repair or maintenance applications. It provides superior performance protecting areas such as ballast tanks, void tanks, crude oil tanks, slop tanks, mud pits, wet spaces, bilges, decks, external hull and steel bridges. Suitable for use in USDA Inspected Facilities.

Certificates & Approvals

  • IMO PSPC (301K only): Type Approved as part of a coating system compliant with IMO MSC.215(82) (Performance Standard for Protective Coatings for Dedicated Seawater Ballast Tanks and Double Side Skin Spaces).
  • Over bare metal: ABS Type Approval Certificate Nº08-HS314072-PDA. Germanischer Lloyds Type Approval Certificate GL-KORR 1159HH. Lloyds Register Type Approval Certificate Nº. MNDE/2008/2847.
  • Over EURO-shop PE31 shop primer: ABS Type Approval Certificate Nº 09-HS538809-PDA.
  • Over UHP hydroblasting, abrasive blasting and EURO-shop PE31 shop primer: DNV Type Approval Certificate Nº K-4211.
  • SNCF: Approved by Societé National de Chemins de Fer (France) as a part of a coating system for steel bridges protection using Ultra High Pressure hydroblasting (livret IN 0036).
  • NFPA: part of a system recognizable as Class A rated by National Fire Protection Agency (USA) regarding Flame Spread and Smoke Developed Index accordingly to NFPA standard 101. Systems have been tested using the ASTM E84 standard by the NGC Fire Testing Laboratory (File FH 1525, Project H330).
  • Newcastle City Health: Tested for non-contamination of grain cargo by Newcastle Occupational Health, UK (Report 6004/97).

Recommended Systems

Immersion or Atmospheric

  • 1 - 2 Coats of Sherwin-Williams Dura-Plate 301K @ 100-150 microns DFT per coat
  • 1 Coat of Sherwin-Williams Dura-Plate 301S (optional) @ 100-150 microns DFT

Atmospheric

  • 1 - 2 Coats of Sherwin-Williams Dura-Plate 301 @ 100-150 microns DFT per coat
  • 1 - 2 Coats of Sherwin-Williams Acrolon 218 HS @ 75-150 microns DFT per coat

The systems listed above are representative of the product’s use, other systems may be appropriate.

Send us your question

Be the first to ask a question about this product!

Question about the product

I have read and agree to the Conditions of Use (read) Send

The question has been correctly sent

Free delivery on orders over £75 (terms & conditions)

• Deliveries will be made within 3 working days (standard delivery)
• You must be UK mainland based for the free delivery offer.
• Postcodes listed are excluded from the free delivery and priced below.

Please note: deliveries will need to be signed for at the point of delivery.

UK Mainland OnlyUp to £75.00£75.01 +
Standard (2/3 working days)£8.00FREE
Next Day£15.00£15.00
Next day before 09:00am£30.00£30.00
Next day before 10:30am£25.00£25.00
Next day before 12:00pm£20.00£20.00
Saturday Delivery£35.00£35.00














£25 (Standard 2-3 Day Delivery Only)

AB30, AB31, AB32, AB33, AB34, AB35, AB36, AB37, AB38, AB44, AB45, AB46, AB47, AB48, AB49, AB50, AB51, AB52, AB53, AB54, AB55, AB56, FK, G83, IV, KW1, KW2, KW3, KW4, KW5, KW6, KW7, KW8, KW9, KW10, KW11, KW12, KW13, KW14, PA, PH, HS, KA27, KA28, ZE

£35 (Standard 2-3 Day Delivery Only)

BT, IM

£50 (Standard 2-3 Day Delivery Only)

JE, GY

Please note that all carriage prices are quoted without V.A.T. at the current rate.

Scottish Islands - outside standard distribution area, please contact us for a quote.

There may be an exception for heavy goods when purchased in quantity where we will contact you to advise any additional charges.

Next Day delivery and Saturday Service is available on stocked items for orders received before 11:00am only.

Because of the nature of our products, we use specially selected carriers to ensure safe and prompt delivery to you.

Please note: Any time or date named by Rawlins Paints Limited for delivery is given and intended as an estimate only and Rawlins Paints Limited shall not be liable to make good any damage or loss whether arising directly or indirectly out of a delay in delivery. Deliveries are made using a reliable nationwide carrier. Although over 99% of consignments arrive on time, we recommend that no labour is employed to undertake work until materials have arrived on site.

Dura-Plate 301K TDS

Download

Dura-Plate 301K MSDS Additive

Download

Dura-Plate 301K MSDS Base

Download

Dura-Plate 301 Brochure

Download

Dura-Plate 301 Track Record

Download