|Typical Coverage (per coat)||1m² per 200-500g|
|Touch Dry||1 Hour 30 Mins|
|Application||Brush, Roller, Spray|
Rust-Oleum Mathys Noxyde is a water-based, single-component paint, designed for easy spray application and yet gives the same protection as a complicated and more expensive polyurethane systems. It is unrivalled for rust-proofing, corrosion and waterproofing protection on metal, roofing and cladding - it even offers more than 15 years of protection in the highest corrosion class C5-M.Read Full Description
£41.03 + VAT
This product is not sold individually. You must select at least 1 quantity for this product.
Warning: Last items in stock!
Rust-Oleum Mathys Noxyde is a water-based, single-component paint, designed for easy spray application and yet gives the same protection as a complicated and more expensive polyurethane systems. Rust-Oleum Mathys Noxyde forms a thick anticorrosive membrane that offers excellent protection against water, salt spray and aggressive environments. Independent research as per the ISO 12944 standard demonstrates that Noxyde is the absolute BEST in corrosive protection - it even offers more than 15 years of protection in the highest corrosion class C5-M.
Rust-Oleum Mathys Noxyde combines flexibility, strong adhesion, water resistance, excellent edge coverage and anti-corrosive pigments while requiring minimal surface preparation. Rust-Oleum Mathys Noxyde is a single pack water-based elastic coating ideal for use on metal cladding, metal roofs, bridges, silos, electrical isolation and more made from iron, steel, copper, aluminium, plastisol, zinc, lead, galvanised metal and PVDF (with a special primer).
Features & Benefits
* All guarantees are subject to approval by our Technical Department prior to purchase and/or use.
30 years track record!
Noxyde has been tested by many institutes and the results are phenomenal with reports of “unsurpassed corrosion control”. Since 1972, Peganox has been applied all over the world in many different climates, from very hot and dry to humid, rural-coastal, onshore and offshore... No impact upon the product's effectiveness was recorded, therefore Peganox is the number one choice for metal protection.
The Noxyde Family:
Rust-Oleum Mathys Noxyde is a premium state-of-the-art, easy-to-use product ideal for long-term corrosion protection of metal surfaces. Its unique formulation performs like no other coating on the market and offers unsurpassed rust protection with minimal labour. It is an excellent over coating and alternative to sandblasting.
Is your Noxyde paint suitable for use on acid primed aluminium greenhouse ?
Keith porter from Peterborough (Uk) - 04/03/17
By 'acid prime' we are assuming you've used some sort of single pack, acid etch primer. We'd need a copy of the Technical Data sheet to confirm potential compatibility but subject to it being acceptable Rust-Oleum Mathys Noxyde is designed for airless spray application, if you intend to apply by brush or roller then Rust-Oleum Mathys Noxyde Peganox would be more suited.
Can rust oleum mathys noxyde paint be used to paint a metal narrow boat below the water line .many thanks for any information on this request...
Philip whitehouse from Southend on sea . Essex (Uk) - 28/01/17
No, Rust-Oleum Mathys Noxyde would definitely not be suitable for this, please call our Technical Department on 0113 2455450 for suitable options.
Can this be painted onto Plastisol coating on roof cladding?
Debbie C from Dublin (Ireland) - 12/09/16
Yes, Rust-Oleum Mathys Noxyde is ideally suited to this application. It can be applied directly to correctly cleaned and preparated Plastisol Colorcoat HP200 and HPS200 Metal Cladding. HP200 is easily recognised by its classic ‘leathery’ surface texture and has been available since 1987, HPS200 has been available from 1998 and has a ‘dimpled’ surface texture and looks quite different from the traditional ‘leathergrain’ Plastisol.
Other metal cladding types such as PVDF, PVF2, Polyester, Polyurethane, Power Coating, etc. require special consideration and in most instances will require a primer coat prior to applicaiton. These surfaces are usually easily recognisable by their ‘smooth’ appearance, however due to the nature of these cladding types we ALWAYS recommend our Technical Department is consulted for advice prior to commencement of works.
We have gates which have some rust and have previously been painted with Hammerite. Can we use this paint sprayed directly onto the (cleaned) prepainted and rusty surfaces?
Jenny Smith from Fairoak (UK) - 19/06/16
Yes, as long as you prepare the surface to remove any loose and flaking paint and rust, Rust-Oleum Mathys Noxyde can be applied directly.
Surface Preparation should be as follows;
Remove grease, oil and all other surface contaminations by alkaline or high pressure (steam) cleaning (max. 200 Bars) in combination with appropriate detergents. The substrate has to be dust free and made rust free by means of sandblasting (Sa2, St2) or high pressure water jetting (min. 600 Bars). After jetting, the substrate has to be dust free. On new galvanised surfaces, new zinc, aluminium, stainless steel, apply first a coat of Rust-Oleum Mathys Pegalink Universal Adhesion Primer. On ferrous substrates, apply Noxyde in red or grey as the first coat. In all instances apply contrasting Noxyde colours for subsequent layers.
Free delivery on orders over £75 (terms & conditions)
• Deliveries will be made within 3 working days (standard delivery)
• You must be UK mainland based for the free delivery offer.
• Postcodes listed are excluded from the free delivery and priced below.
Please note: deliveries will need to be signed for at the point of delivery.
|UK Mainland Only||Up to £75.00||£75.01 +|
|Standard (2/3 working days)||£8.00||FREE|
|Next day before 09:00am||£30.00||£30.00|
|Next day before 10:30am||£25.00||£25.00|
|Next day before 12:00pm||£20.00||£20.00|
£25 (Standard 2-3 Day Delivery Only)
AB30, AB31, AB32, AB33, AB34, AB35, AB36, AB37, AB38, AB44, AB45, AB46, AB47, AB48, AB49, AB50, AB51, AB52, AB53, AB54, AB55, AB56, FK, G83, IV, KW1, KW2, KW3, KW4, KW5, KW6, KW7, KW8, KW9, KW10, KW11, KW12, KW13, KW14, PA, PH, HS, KA27, KA28, ZE
£35 (Standard 2-3 Day Delivery Only)
£50 (Standard 2-3 Day Delivery Only)
Please note that all carriage prices are quoted without V.A.T. at the current rate.
Scottish Islands - outside standard distribution area, please contact us for a quote.
There may be an exception for heavy goods when purchased in quantity where we will contact you to advise any additional charges.
Next Day delivery and Saturday Service is available on stocked items for orders received before 11:00am only.
Because of the nature of our products, we use specially selected carriers to ensure safe and prompt delivery to you.
Please note: Any time or date named by Rawlins Paints Limited for delivery is given and intended as an estimate only and Rawlins Paints Limited shall not be liable to make good any damage or loss whether arising directly or indirectly out of a delay in delivery. Deliveries are made using a reliable nationwide carrier. Although over 99% of consignments arrive on time, we recommend that no labour is employed to undertake work until materials have arrived on site.