"

Rust-Oleum 9100 High Solids Epoxy

Rust-Oleum 9100 High Solids Epoxy View larger
Typical Coverage (per coat)7.3m² per litre
Touch Dry6 Hours
ApplicationBrush, Roller, Spray
The figures stated above are approximate. Please ensure you refer to all datasheets for full application information.

A higher solids, better coverage and lower VOC content product than the standard 9100 Epoxy. Two-pack, glossy epoxy coating for metal, walls and floors. The most efficient epoxy system providing a very hard coating with high layer thickness for lasting results even with a single coat application.

Read Full Description

More details

£108.16 + VAT

Rust-Oleum 9100 High Solids Epoxy is a higher solids, better coverage and lower VOC content product than the standard 9100 Epoxy. Two-pack, glossy epoxy coating for metal, walls and floors. The most efficient epoxy system providing a very hard coating with high layer thickness for lasting results even with a single coat application. Also ideal as a glossy floor paint for garages, warehouses, indoor car parks etc. Optimal protection can be achieved in only one or two layers.

With Rust-Oleum 9100 Epoxy System you can save time on;
Application
Apply in one thick layer if required
Mixing
Easy 1:1 mixing ratio, no waste and no thinning required.
Surface Preparation
Can be applied directly to sound rusted surfaces without the need for blasting.
Maintenance
Longer lasting results means reduced downtime for repairs and re-coating.

Features & Benefits

  • Single coat application directly over rusted surfaces
  • Excellent results with minimal surface preparation
  • Full colour intensity in one coat
  • 1:1 mixing ratio
  • Very resistant to abrasion
  • Excellent resistance against immersion; can be used in swimming pools
  • Resistant to oils, solvents and many chemicals
  • Suitable for frequent cleaning with chemicals
  • Tintable to virtually any colour
  • Winter grade & Standard versions available

Choice of 3 versions:
9101 - Standard activator ideal for most circumstances
9101HS – Better coverage and low VOC
9101WG - For application temperatures down to 0°C

Rust-Oleum 9100 High Solids Epoxy is designed for application on manually prepared rusted steel surfaces and can also be used on clean, blasted steel, primed steel, concrete and previously coated surfaces. Rust-Oleum 9100 Topcoats are primarily intended for brush and airless spray application and can also be applied by roller.

Rust-Oleum 9100 High Solids Epoxy offers excellent protection against strong chemicals, acids, alkalis and solvents; frequent product spillage and chemical cleaning; high humidity and moisture conditions. If good U.V. resistance is required Rust-Oleum Polyurethane Topcoats 9200, 9600 or 9900 should be applied (except for the clear coatings).

Rust-Oleum 9100 High Solids Epoxy can be applied on cleaned, sound mineral substrates, sound, well prepared previous coatings; porous substrates should be primed with Rust-Oleum Impregnation Primer 5401; very dense substrates, like ceramic tiles, should be primed with Rust-Oleum Super Adhesive 3333.

Required primers:

Light rusted metal - 9169 Epoxy Rust primer
Bare metal - 9170/9180 Epoxy Metal primer
Smooth concrete - 3333 Epoxy Adhesion primer

Please note: The outdoor durability and chemical resistance of the system can be further improved by the application of an additional topcoat Rust-O-Thane 9200 or 9600.

Send us your question

Be the first to ask a question about this product!

Question about the product

I have read and agree to the Conditions of Use (read) Send

The question has been correctly sent

Free delivery on orders over £75 (terms & conditions)

• Deliveries will be made within 3 working days (standard delivery)
• You must be UK mainland based for the free delivery offer.
• Postcodes listed are excluded from the free delivery and priced below.

Please note: deliveries will need to be signed for at the point of delivery.

UK Mainland OnlyUp to £75.00£75.01 +
Standard (2/3 working days)£8.00FREE
Next Day£15.00£15.00
Next day before 09:00am£30.00£30.00
Next day before 10:30am£25.00£25.00
Next day before 12:00pm£20.00£20.00
Saturday Delivery£35.00£35.00














£25 (Standard 2-3 Day Delivery Only)

AB30, AB31, AB32, AB33, AB34, AB35, AB36, AB37, AB38, AB44, AB45, AB46, AB47, AB48, AB49, AB50, AB51, AB52, AB53, AB54, AB55, AB56, FK, G83, IV, KW1, KW2, KW3, KW4, KW5, KW6, KW7, KW8, KW9, KW10, KW11, KW12, KW13, KW14, PA, PH, HS, KA27, KA28, ZE

£35 (Standard 2-3 Day Delivery Only)

BT, IM

£50 (Standard 2-3 Day Delivery Only)

JE, GY

Please note that all carriage prices are quoted without V.A.T. at the current rate.

Scottish Islands - outside standard distribution area, please contact us for a quote.

There may be an exception for heavy goods when purchased in quantity where we will contact you to advise any additional charges.

Next Day delivery and Saturday Service is available on stocked items for orders received before 11:00am only.

Because of the nature of our products, we use specially selected carriers to ensure safe and prompt delivery to you.

Please note: Any time or date named by Rawlins Paints Limited for delivery is given and intended as an estimate only and Rawlins Paints Limited shall not be liable to make good any damage or loss whether arising directly or indirectly out of a delay in delivery. Deliveries are made using a reliable nationwide carrier. Although over 99% of consignments arrive on time, we recommend that no labour is employed to undertake work until materials have arrived on site.

9100 Epoxy TDS

Download

9100 Epoxy MSDS

Download

9100 Epoxy MSDS Activator

Download