Teamac Anti-Corrosive Finish QD, a quick drying, anti-corrosive primer and finish in one formulated for direct application to prepared steel and cast iron.
Teamac Anti-Corrosive Finish QD is a fast drying anticorrosive finish, giving a good durable, protective coating to metal surfaces. Can be used over a suitable quick drying primer or as a primer and finish in one directly to prepared metals. Teamac Anti-Corrosive Finish QD is a quick drying coating ideal for structural steel and metal fabrications. Available in 2,500+ colours from RAL, NCS and British Standard.
| Technical Data | |
|---|---|
| Volume Solids | 43% |
| VOC Content | Max 506 g/litre |
| Specific Gravity | 1.09 to 1.25 @ 20°C |
| Viscosity | 2 - 2.5 Poise @ 25°C |
| Flash Point | 25°C (closed cup) |
| Product Data | |||
|---|---|---|---|
| Dry Film Thickness | Wet Film Thickness | Theoretical Coverage | |
| Maximum | 40 µm | 90 µm | 10 m2/litre (40 DFT by airless spray), 7 m2/litre (60 DFT by airless spray), |
| The practical spreading rate may be lower as this depends on factors such as the porosity and roughness of the surface to be painted and material losses during application. | |||
| Drying Times At 20°C/RH 50% | |
|---|---|
| Touch Dry: | 1 Hour |
| Dry To Recoat: | 30 minutes or 12 hours |
| Fully Cured: | 5 - 7 Days |
Low temperature and high humidity will adversely affect application, drying and performance of any coating.
Stir well before use.
As dictated by normal good painting practice. Care must be taken during application that the temperature is above the dew point to avoid any contamination. In confined spaces, provide adequate ventilation during application and drying.
| Method | Airless Spray | Conventional Spray | Brush | Roller |
|---|---|---|---|---|
| Yes | No | Yes (small areas) | No |
See safety data sheet - White - SDS 10921, Black - SDS 10889, All Colours - SDS 10920
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
 Greg Haines on 2019-06-05 11:00:46 | Question: Hi . Can this be applied direct onto the steel on my narrowboat as a primer and top coat then a coating if your surgrip deck paint in top if that . ? Regards Greg. |
Answer from Rawlins’ Technical Team: Teamac Zinc Phosphate Primer is recommended on ferrous metals prior to the application of Teamac Suregrip Deck Paint. | |
| Damon Cook on 2018-08-07 09:59:39 | Question: Hi, Ref: Teamac anti corrosive finish QD 1) Is this paint water or oil based? 2) Is it suitable for galvanised metal? Many thanks, Damon |
Answer from Rawlins’ Technical Team: This is a combined primer/topcoat, Xylene solvent/oil based system and it is suitable for galvanised metal, provided that the metal is suitably prepared - please refer to the product data sheet for details, available to download from the product page. | |
Teamac Anti-Corrosive Finish QD is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
A specially formulated blend of solvents designed to mix with its compatible Teamac or Coo-Var coating to create an optimal consistancy for application.Suitable for application by Brush, Roller or Spray. Teamac Thinner 16 can also be used for the cleaning of some surfaces prior to application of the coating. Suitable for cleaning of the...
£14.02 (incl. VAT)
£11.68 (ex. VAT)
General Painting Application Kit from Rawlins Paints provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site.Provides an economical way of making sure you will have what you need Ideal for interior and exterior paint projects Click to jump down to...
£12.04 (incl. VAT)
£10.03 (ex. VAT)
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools)1 x Rust-Oleum...
£25.84 (incl. VAT)
£21.53 (ex. VAT)
