"

Jotun Penguard Pro

Jotun Penguard Pro View larger
Typical Coverage (per coat)5m² per litre
Touch Dry3 hours
ApplicationBrush, Roller, Spray
The figures stated above are approximate. Please ensure you refer to all datasheets for full application information.

Jotun Penguard Pro is a two component amine cured epoxy coating that is a surface tolerant, fast drying, high solids, high build product specially designed as a universal, all round, all year, new construction coating.

This Jotun Paints product can be used as a primer, mid coat, finish coat or as a single coat system in atmospheric and immersed environments.

Read Full Description

More details

£159.35 + VAT

Jotun Penguard Pro is a two component amine cured epoxy coating that is a surface tolerant, fast drying, high solids, high build product specially designed as a universal, all round, all year, new construction coating where fast dry to handle times are required. Can be used as a primer, mid coat, finish coat or as a single coat system in atmospheric and immersed environments. Suitable for properly prepared carbon steel, stainless steel, aluminium, galvanised steel and thermally sprayed zinc substrates. It can be applied at sub zero surface temperatures.

Jotun Penguard Pro is suitable for structural steel and piping to be exposed to corrosive environments up to very high and immersed. Recommended for offshore environments, including splash zones, refineries, power plants, bridges, buildings and mining equipment. Specially designed as a universal product in coating systems where extended durability is required. The product provides great flexibility in choice of dry film thickness range as well as area of use and application temperatures.

Approvals and certificates

  • Pre-qualification testing in acordance with NORSOK M-501, Rev. 5, System 1, suitable for exterior exposure in offshore environment, below 120°C.

Additional certificates and approvals may be available on request.

Features & Benefits

  • A universal product in coating systems where extended durability is required
  • Provides great flexibility in choice of dry film thickness - 100 to 500 microns
  • All year around - can be applied at sub-zero surface temperature
  • Fast dry to recoat
  • Fast dry to handle
  • Designed for protection in severe corrosive environments

Multi-purpose / universal coating reduces the number of coatings needed

  • In atmospheric and immersed conditions
  • Wide dry film thickness range
  • 100 to 500 microns
  • All surfaces – steel, galvanised and aluminium
  • Blast cleaning to min. Sa 2½ (ISO 8501-1:2007)
  • For previously coated surfaces UHPWJ to WJ2 (NACE No.5/SSPC-SP 12
  • Power tool cleaning to min. St 2 (ISO 8501-1:2007) may be acceptable, subject to exposure
  • Certified in systems for NORSOK system 1 and 7
  • Certified for application in water ballast tanks at newbuilding stage in accordance with PSPC (IMO Res. MSC 82/W)

All season

  • For application down to -5°C 
  • Fast dry-to-recoat and fast-to-handle

High solids

  • Good spreading rate
  • Low VOC

Ultra High Pressure Water Jetting has become an effective surface pre-treatment method in new building and new construction situations. Penguard Pro is based on a new in-house developed technology giving the coating superior adhesion, also to UHPJ surfaces. Penetration properties of Jotun Penguard Pro are far better than traditional new construction coatings.

Send us your question

Be the first to ask a question about this product!

Question about the product

I have read and agree to the Conditions of Use (read) Send

The question has been correctly sent

Free delivery on orders over £75 (terms & conditions)

• Deliveries will be made within 3 working days (standard delivery)
• You must be UK mainland based for the free delivery offer.
• Postcodes listed are excluded from the free delivery and priced below.

Please note: deliveries will need to be signed for at the point of delivery.

UK Mainland OnlyUp to £75.00£75.01 +
Standard (2/3 working days)£8.00FREE
Next Day£15.00£15.00
Next day before 09:00am£30.00£30.00
Next day before 10:30am£25.00£25.00
Next day before 12:00pm£20.00£20.00
Saturday Delivery£35.00£35.00














£25 (Standard 2-3 Day Delivery Only)

AB30, AB31, AB32, AB33, AB34, AB35, AB36, AB37, AB38, AB44, AB45, AB46, AB47, AB48, AB49, AB50, AB51, AB52, AB53, AB54, AB55, AB56, FK, G83, IV, KW1, KW2, KW3, KW4, KW5, KW6, KW7, KW8, KW9, KW10, KW11, KW12, KW13, KW14, PA, PH, HS, KA27, KA28, ZE

£35 (Standard 2-3 Day Delivery Only)

BT, IM

£50 (Standard 2-3 Day Delivery Only)

JE, GY

Please note that all carriage prices are quoted without V.A.T. at the current rate.

Scottish Islands - outside standard distribution area, please contact us for a quote.

There may be an exception for heavy goods when purchased in quantity where we will contact you to advise any additional charges.

Next Day delivery and Saturday Service is available on stocked items for orders received before 11:00am only.

Because of the nature of our products, we use specially selected carriers to ensure safe and prompt delivery to you.

Please note: Any time or date named by Rawlins Paints Limited for delivery is given and intended as an estimate only and Rawlins Paints Limited shall not be liable to make good any damage or loss whether arising directly or indirectly out of a delay in delivery. Deliveries are made using a reliable nationwide carrier. Although over 99% of consignments arrive on time, we recommend that no labour is employed to undertake work until materials have arrived on site.

Penguard Pro TDS

Download

Penguard Pro Comp A MSDS

Download

Penguard Pro Comp B MSDS

Download

Penguard Pro App. Guide

Download
IMPORTANT
Whilst every effort is made to ensure our data sheets are up to date, we advise you check the latest revision directly with the manufacturer to ensure you have the most current version.
E J Rawlins & Co. Ltd trading as Rawlins Paints make available product data sheets and information in good faith but without warranty. We do not accept liability for any errors or omissions contained within the data sheets or any outdated versions.