"

Jotun Penguard HB

Jotun Penguard HB View larger
Typical Coverage (per coat)5.4m² per litre
Touch Dry2.5 hours
ApplicationBrush, Spray
The figures stated above are approximate. Please ensure you refer to all datasheets for full application information.

Jotun Penguard HB is a two component polyamide cured high molecular weight epoxy coating designed as a high build, all purpose coating for new construction. Can be used as a primer, mid coat, finish coat or as a single coat system in atmospheric and immersed environments.

Read Full Description

More details

£34.49 + VAT

Jotun Penguard HB is a two component polyamide cured high molecular weight epoxy coating designed as a high build, all purpose coating for new construction. Can be used as a primer, mid coat, finish coat or as a single coat system in atmospheric and immersed environments. Suitable for properly prepared carbon steel, stainless steel, aluminium, concrete, galvanised steel, shop primed steel and thermally sprayed zinc substrates.

Jotun Penguard HB is suitable for structural steel and piping to be exposed to corrosive environments up to very high and immersed. Recommended for offshore environments, refineries, power plants, bridges, buildings and mining equipment.

Send us your question

Question

Hello,Do you have any application technical manual in order to better apply the coating? We are looking for a 100 microns thick. Also do you just sell the product or do you be able to apply the coating and the blasting? Thanks

Hugo from Reading (Uk) - 02/09/16

Answer

For full details on application of this product please download the TDS (Technical Data Sheet), MSDS's (Material Safety Data Sheets) and Application Guide. These documents are readily available to download from the 'DATASHEETS' tab which can be found at the top of the main description section on the product page.

We are only a supplier of the coatings and do not offer an application service.

Question about the product

I have read and agree to the Conditions of Use (read) Send

The question has been correctly sent

Free delivery on orders over £75 (terms & conditions)

• Deliveries will be made within 3 working days (standard delivery)
• You must be UK mainland based for the free delivery offer.
• Postcodes listed are excluded from the free delivery and priced below.

Please note: deliveries will need to be signed for at the point of delivery.

UK Mainland OnlyUp to £75.00£75.01 +
Standard (2/3 working days)£8.00FREE
Next Day£15.00£15.00
Next day before 09:00am£30.00£30.00
Next day before 10:30am£25.00£25.00
Next day before 12:00pm£20.00£20.00
Saturday Delivery£35.00£35.00














£25 (Standard 2-3 Day Delivery Only)

AB30, AB31, AB32, AB33, AB34, AB35, AB36, AB37, AB38, AB44, AB45, AB46, AB47, AB48, AB49, AB50, AB51, AB52, AB53, AB54, AB55, AB56, FK, G83, IV, KW1, KW2, KW3, KW4, KW5, KW6, KW7, KW8, KW9, KW10, KW11, KW12, KW13, KW14, PA, PH, HS, KA27, KA28, ZE

£35 (Standard 2-3 Day Delivery Only)

BT, IM

£50 (Standard 2-3 Day Delivery Only)

JE, GY

Please note that all carriage prices are quoted without V.A.T. at the current rate.

Scottish Islands - outside standard distribution area, please contact us for a quote.

There may be an exception for heavy goods when purchased in quantity where we will contact you to advise any additional charges.

Next Day delivery and Saturday Service is available on stocked items for orders received before 11:00am only.

Because of the nature of our products, we use specially selected carriers to ensure safe and prompt delivery to you.

Please note: Any time or date named by Rawlins Paints Limited for delivery is given and intended as an estimate only and Rawlins Paints Limited shall not be liable to make good any damage or loss whether arising directly or indirectly out of a delay in delivery. Deliveries are made using a reliable nationwide carrier. Although over 99% of consignments arrive on time, we recommend that no labour is employed to undertake work until materials have arrived on site.

Penguard HB TDS

Download

Penguard HB Comp A MSDS

Download

Penguard HB Comp B MSDS

Download

Penguard HB Application Guide

Download
IMPORTANT
Whilst every effort is made to ensure our data sheets are up to date, we advise you check the latest revision directly with the manufacturer to ensure you have the most current version.
E J Rawlins & Co. Ltd trading as Rawlins Paints make available product data sheets and information in good faith but without warranty. We do not accept liability for any errors or omissions contained within the data sheets or any outdated versions.