"

Jotun Alkydprimer

Jotun Alkydprimer View larger
Typical Coverage (per coat)13m² per litre
Touch Dry3 hours
ApplicationBrush, Roller, Spray
The figures stated above are approximate. Please ensure you refer to all datasheets for full application information.

Jotun Alkydprimer is a one component, single pack oxidatively drying alkyd coating that can be used as primer or mid coat in atmospheric environments. Suitable for properly prepared carbon steel, aluminium and wooden substrates, this alkyd primer is deal for a wide range of industrial structures or for touch up areas in the marine industry.

Read Full Description

More details

£27.11 + VAT

Alkyd Primer

Jotun Alkydprimer can be used as a primer or mid coat in marine and atmospheric environments. This alkyd coating is generally used for touch-up work and small scale purposes within the marine industry and will also act as a protective coating for a wide range of industrial structures - carbon steel and aluminium.

Please download the attached datasheet for more technical information, including further application specifications, drying and curing times, heat resistance and product compatibility.

  • Reduces application cost
  • Resistant to dry heat up to 120°C

When applying this alkyd primer, the surface should always be clean, dry and free-from loose materials and contamination. General surface preparation guidelines are included in the datasheet for wood, carbon steel and aluminium.

Jotun Alkyd Primer can be applied by spray, brush or roller - with rollers needing extra care to achieve the specified dry film thickness.

Jotun Thinner No. 2 should be used as the thinner and cleaning solvents for Jotun Alkydprimer.

Reduces application cost and waste
Alkydprimer requires no mixing and has no pot life restrictions, which reduce your application cost, waste and leftover paint.

Application
Can be applied to any surface of new or aged coatings in atmospheric conditions - also in conjunction with Pilot II as a topcoat or finish coat.

Send us your question

Question

I am looking for primer for aluminium below the waterline, under antifouling coat. Is this suitable? Jus to touch in on existing bare patches, not to coat a new surface.

james lean from Colchester (UK) - 14/05/16

Answer

The primer we recommend for prepared aluminium (cleaned and lightly abraded), which can then be overcoated with antifouling paint is Jotun Safeguard Universal ES however this product is only available in 18L drums.

For small repair areas you could instead apply 2-3 coats of Jotun Penguard HB, followed by a single coat of Jotun Vinyguard Silvergrey 88, before applying antifouling paint.

Question about the product

I have read and agree to the Conditions of Use (read) Send

The question has been correctly sent

Free delivery on orders over £75 (terms & conditions)

• Deliveries will be made within 3 working days (standard delivery)
• You must be UK mainland based for the free delivery offer.
• Postcodes listed are excluded from the free delivery and priced below.

Please note: deliveries will need to be signed for at the point of delivery.

UK Mainland OnlyUp to £75.00£75.01 +
Standard (2/3 working days)£8.00FREE
Next Day£15.00£15.00
Next day before 09:00am£30.00£30.00
Next day before 10:30am£25.00£25.00
Next day before 12:00pm£20.00£20.00
Saturday Delivery£35.00£35.00














£25 (Standard 2-3 Day Delivery Only)

AB30, AB31, AB32, AB33, AB34, AB35, AB36, AB37, AB38, AB44, AB45, AB46, AB47, AB48, AB49, AB50, AB51, AB52, AB53, AB54, AB55, AB56, FK, G83, IV, KW1, KW2, KW3, KW4, KW5, KW6, KW7, KW8, KW9, KW10, KW11, KW12, KW13, KW14, PA, PH, HS, KA27, KA28, ZE

£35 (Standard 2-3 Day Delivery Only)

BT, IM

£50 (Standard 2-3 Day Delivery Only)

JE, GY

Please note that all carriage prices are quoted without V.A.T. at the current rate.

Scottish Islands - outside standard distribution area, please contact us for a quote.

There may be an exception for heavy goods when purchased in quantity where we will contact you to advise any additional charges.

Next Day delivery and Saturday Service is available on stocked items for orders received before 11:00am only.

Because of the nature of our products, we use specially selected carriers to ensure safe and prompt delivery to you.

Please note: Any time or date named by Rawlins Paints Limited for delivery is given and intended as an estimate only and Rawlins Paints Limited shall not be liable to make good any damage or loss whether arising directly or indirectly out of a delay in delivery. Deliveries are made using a reliable nationwide carrier. Although over 99% of consignments arrive on time, we recommend that no labour is employed to undertake work until materials have arrived on site.

Alkydprimer TDS

Download

Alkydprimer MSDS

Download

Alkydprimer Application Guide

Download