Rust-Oleum Hard Hat 2117/1017 Galva Zinc Alu is an esthetically pleasing cathodic protection for damaged galvanised steel. A fast drying, zinc rich coating based on an epoxy ester resin, this product contains pure zinc and aluminium as pigments and provides cathodic protection.
Rust-Oleum Hard Hat 2117/1017 Galva Zinc Alu
Rust-Oleum Hard Hat Galva Zinc Alu is a fast drying, zinc rich coating based on an epoxy ester resin. The product contains pure zinc and aluminium as pigments and provides cathodic protection.
This product should be used on new, bare steel, blasted steel or galvanized steel surfaces. Primarily intended for brush application on small areas or aerosols can be used for touch-up. Can be recoated with non-saponifiable coatings. It can be used as a single coat in light industrial exposures, corrosive environments and high humidity areas.
Features & Benefits
Recommended use
RUST-OLEUM Zinc Aluminium Spray 2117 should be used on damaged galvanized steel surfaces. RUST-OLEUM Zinc Aluminium Spray 2117 is intended to be applied on small areas or for touch-up. RUST-OLEUM Zinc Aluminium Spray 2117 should be used as a single coat in light industrial exposures, corrosive environments and high humidity areas.
Technical data
Drying times at 20°C/RH 50%
Lead and chromate free thus eliminating the danger of poisonous gases escaping if the coated surface needs to be welded at a later date.
Shelf life
3 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C.
Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
 Christopher on 2024-03-04 12:45:51 | Question: What do I use to clean brushes? |
Answer from Rawlins’ Technical Team: Rust-Oleum Thinner 160 would be used. | |
| Tim Roberts on 2023-08-04 07:53:28 | Question: Can the 1kg tin be used with an air gun or is it brush only? Do you stock 1Ltr or 2.5Ltr in the 2117? |
Answer from Rawlins’ Technical Team: The 1kg pack size is for brush application only. We only stock 1kg tins or 500ml aerosols. | |
| T G on 2023-07-18 20:04:16 | Question: *Galvanised panels with rust!! Needing help on how to remove rust? & should I treat panels with anything afterwards? Also is there anything to prevent rust coming back? T.I.A Kind Regards, T. |
Answer from Rawlins’ Technical Team: Assuming the surface is thoroughly cleaned and degreased firstly, with all traces of rust removed by wire brushing/scraping to de-rust the galvanised steel panel, you could use Rust-Oleum Hard Hat 2117/1017 Galva Zinc Alu however this is intended for use on small areas or as a touch-up product. | |
| Reinoud van de Wiel on 2023-02-14 13:02:07 | Question: Is this product suitable to be used for assembly/maintenance of food processing machines? Especially, is this product considered Food Safe according to applicable law? Kind Regards, Reinoud. |
Answer from Rawlins’ Technical Team: Unfortunately this product is not tested to be Food Safe. | |
| Richard on 2022-08-04 09:20:05 | Question: Is the 1kg size an aerosol or brush applied? |
Answer from Rawlins’ Technical Team: The 1kg pack size is in a tin for brush application. | |
| Patrick on 2020-11-08 14:37:31 | Question: I want to paint a galvanised anchor on my boat which has gone rusty in some parts , how should I prepare/prime ?the anchor before applying Galva Zinc Alu and paint? |
Answer from Rawlins’ Technical Team: We can recommend rinsing the anchor with soap and fresh water, dry, wire brush areas to remove the rust. Applied 3 heavy coats of Jotun Jotamastic Smart Pack HB followed by Jotun Hardtop XP. | |
| mrs Ann Pearson on 2016-03-26 01:16:59 | Question: Help does this paint withstand a freezing of up to -40% only I need to paint the inside of a chest freezer which is steel but can't have any smell as store ice cream in the freezer. Thank you Ann |
Answer from Rawlins’ Technical Team: We would recommend you overcoat Rust-Oleum Hard Hat 2117/1017 Galva Zinc Alu with Rust-Oleum Hard Hat 2500 Transparent Protection. The application would need to take place when the freezer was out of use and at ambient temperatures. Once the coatings dry they should be fine to operate at low temperatures in a freezer. | |
Rust-Oleum Hard Hat 2117/1017 Galva Zinc Alu is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools)1 x Rust-Oleum...
£25.84 (incl. VAT)
£21.53 (ex. VAT)
