International Intergard 214 is a two component epoxy sealer coat pigmented with aluminium flake for the effective penetration and sealing of thermally sprayed aluminium coatings to eliminate porosity. Has specification approval for UK Department of Transport Item No.159.Read Full Description
£65.36 + VAT
This product is not sold individually. You must select at least 1 quantity for this product.
Warning: Last items in stock!
International Intergard 214 is a two component epoxy sealer coat pigmented with aluminium flake for the effective penetration and sealing of thermally sprayed aluminium coatings to eliminate porosity.
International Intergard 214 has the following specification approvals:
International Intergard 214 can be overcoated with a wide range of products, including:
International Intergard 214 is designed to seal porosity in aluminium metal spray. When applying by brush, work the sealer thoroughly into the surface of the aluminium metal spray.
When application is by spray rather than by brush, careful inspection will be needed to ensure thorough sealing of the aluminium metal spray. Any runs, sags or pooling on horizontal surfaces should be brushed out immediately.
Best results will be achieved at temperatures above 0°C (32°F). Surface temperature must always be a minimum of 3°C (5°F) above dew point. In common with all epoxies, Intergard 214 will chalk when exposed to weathering but this will not reduce efficiency in sealing metal spray.
Level of sheen and surface finish are dependent on application method. Avoid using a mixture of application methods whenever possible. Intergard 214 is not suitable for exposure to acid or alkaline environments.
Be the first to ask a question about this product!
Free delivery on orders over £75 (terms & conditions)
• Deliveries will be made within 3 working days (standard delivery)
• You must be UK mainland based for the free delivery offer.
• Postcodes listed are excluded from the free delivery and priced below.
Please note: deliveries will need to be signed for at the point of delivery.
|UK Mainland Only||Up to £75.00||£75.01 +|
|Standard (2/3 working days)||£8.00||FREE|
|Next day before 09:00am||£30.00||£30.00|
|Next day before 10:30am||£25.00||£25.00|
|Next day before 12:00pm||£20.00||£20.00|
£25 (Standard 2-3 Day Delivery Only)
AB30, AB31, AB32, AB33, AB34, AB35, AB36, AB37, AB38, AB44, AB45, AB46, AB47, AB48, AB49, AB50, AB51, AB52, AB53, AB54, AB55, AB56, FK, G83, IV, KW1, KW2, KW3, KW4, KW5, KW6, KW7, KW8, KW9, KW10, KW11, KW12, KW13, KW14, PA, PH, HS, KA27, KA28, ZE
£35 (Standard 2-3 Day Delivery Only)
£50 (Standard 2-3 Day Delivery Only)
Please note that all carriage prices are quoted without V.A.T. at the current rate.
Scottish Islands - outside standard distribution area, please contact us for a quote.
There may be an exception for heavy goods when purchased in quantity where we will contact you to advise any additional charges.
Next Day delivery and Saturday Service is available on stocked items for orders received before 11:00am only.
Because of the nature of our products, we use specially selected carriers to ensure safe and prompt delivery to you.
Please note: Any time or date named by Rawlins Paints Limited for delivery is given and intended as an estimate only and Rawlins Paints Limited shall not be liable to make good any damage or loss whether arising directly or indirectly out of a delay in delivery. Deliveries are made using a reliable nationwide carrier. Although over 99% of consignments arrive on time, we recommend that no labour is employed to undertake work until materials have arrived on site.