Teamac QD Zinc Phosphate Primer is a high build, high performance quick drying metal primer. It has excellent anti-corrosive properties.
Teamac QD Zinc Phosphate Primer is a high build, high performance quick drying metal primer. It has excellent anti-corrosive properties.
Used as an anti-corrosive primer on iron and steel where rapid coating and finishing is required. Ideal in coastal areas.
| Product Data | |
|---|---|
| Typical S.G. (Specific Gravity) | 1.5 @ 20 °C |
| Volume Solids | 56% |
| Wet Film Thickness W.F.T | 100 to 135 microns |
| Dry Film Thickness D.F.T | 50 to 75 microns |
| Expected Spreading Rate | 10 sq.m / litre @ 50 microns DFT |
| 7.5 sq.m / litre @ 75 microns DFT | |
| The practical spreading rate may be lower as this depends on factors such as the porosity and roughness of the surface to be painted and material losses during application. | |
| Typical Viscosity | 2.2 to 2.5 Poise - C&P @ 25 °C |
| Flash Point | 25 °C (closed cup) |
| Voc Content | 382 / litre |
| Drying Time @ Recommended D.F.T | |
|---|---|
| Touch Dry | 15 to 30 mins @ 20 °C |
| Hard Dry | 6 hours @ 20 °C |
| Full Hardness | N/A |
| Low temperature and high humidity will adversely affect application, drying and performance of any coating. | |
| Minimum Overcoating Time | 4 hours |
| Application Details | |
|---|---|
| Method | Airless Spray |
| Thinner(Max vol) | Thinners 16 (10%) |
| Nozzle size | 0.017" - 0.021" |
| Nozzle pressure | 1800 to 2000 psi |
| Cleaning solvent | Thinners 16 |
| Recoat interval | 4 hours |
Ensure all surfaces are clean, dry and free from grease, oil and any other contaminates.
Bare steel should be free from dust, rust and scale. Blast cleaning to SA 2½ is recommended. If blast cleaning is impractical, mechanical cleaning should be employed as hand cleaning does not clean the steel to the required degree.
Any oil or grease should be removed with Teamac Universal Degreaser before de-rusting.
Where blast cleaning is carried out after assembly, special attention must be paid to edges, corners, nuts, bolts, welds etc. Welds should, if necessary be ground and all weld spatter, slag etc. must be removed.
Mix well before use.
As dictated by normal good painting practice. Care must be taken during application that the temperature is above the dew point to avoid any contamination. In confined spaces, provide adequate ventilation during application and drying.
N/A
Suitable topcoat, e.g Teamac Rapidry Gloss.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
 elaine on 2021-05-13 09:53:31 | Question: hello, I have some new mild steel fencing to paint it will be in an exposed urban area, can i use this primer under a topcoat of Zinsser AllCoat Exterior Satin (Water Based)? if not what would you recommend. |
Answer from Rawlins’ Technical Team: No, for this application assuming the mild steel panels are clean, dry, sound and prepared as detailed in the Technical Data Sheet we can recommend Rust-Oleum 3369/3380 CombiPrimer Anti-Corrosion followed by two coats of Rust-Oleum CombiColor Original. This can be mixed to many RAL and BS colours in a satin or gloss finish. | |
Teamac QD Zinc Phosphate Metal Primer is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Coo-Var Universal Degreaser Cleaner is a careful blend of solvents to give powerful cleaning and degreasing properties. Product FeaturesDegreases and removes oil patches from floors, walls, interior and exterior surfaces prior to acid etching or painting. Part of the cleaning process. Essential for a good finish. Can also be used as a...
£24.56 (incl. VAT)
£20.47 (ex. VAT)
Teamac Rapidry QD Enamel, is a fast drying industrial gloss finish, giving a good durable, protective coating to metal surfaces primed with Teamac Rapidry High Build Zinc Phosphate Primer or similar. Used as a quick drying finish for structural steel and metal fabrications Good coverage, up to 11m2/l Available in 2,500+ colours from RAL,...
£15.98 (incl. VAT)
£13.32 (ex. VAT)
General Painting Application Kit from Rawlins Paints provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site.Provides an economical way of making sure you will have what you need Ideal for interior and exterior paint projects Click to jump down to...
£12.04 (incl. VAT)
£10.03 (ex. VAT)
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools)1 x Rust-Oleum...
£25.84 (incl. VAT)
£21.53 (ex. VAT)
